Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
As
such Helix allows 16 inputs per path so the values I have assigned are based on
a DSP being one 16th. So If an effect has a value of 2 then you potentailly can
have 8 of them in one path.
I have rounded the values up so for example if you use 8 effects value 2 DSP it
may be possible to use another effect with a value of 1 or 2!
The aim of this exercise was to help me when setting up a patch and at the end
of the path running out of DSP. I can quickly look at the chart and see which
effect, AMP, CAB etc is eating up the DSP and make a change for one with less
DSP.
Note some items are restricted by the Helix software which only allows a certain
qty per path. Eg AMPs, CAB's, Irs etc.
As such if an amp+cab has a value of 6 then you can use other effects for the
remaining 14 DSP.
Hope this makes sense.
Updated to include firmware release 2.50
Added % DSP Values
Updated DSP Errors on Legacy Effects.
Re evaluated DSP for AMPS and Cabs and updated DSP values.