Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
SPECIFICATIONS
BASIC SPECS
11.2 m (36.7 ft) Mast - Hole Diameter Range Up to 152-250 mm (Up to 6-9.8 in)
11.2 m (36.7 ft) Mast - Hole Depth Range -
11.2 m
Single Pass Depth
11.2 m (36.7 ft) Mast - Hole Depth Range -
Down to 53.9 m (Down to 176.7 ft)
Multi Pass Depth
11.2 m (36.7 ft) Mast - Pulldown Capacity Up to 20 411 kg (Up to 45,000 lb)
11.2 m (36.7 ft) Mast - Hoist Capacity Up to 20 411 kg (Up to 45,000 lb)
11.2 m (36.7 ft) Mast - Hoist Speed 0.81 m/s
11.2 m (36.7 ft) Mast - Bit Load - Single Pass Up to 22 321 kg (Up to 49,210 lb)
13.6 m (44.6 ft) Mast - Hole Diameter Range Up to 152-250 mm (Up to 6-9.8 in)
13.6 m (44.6 ft) Mast - Hole Depth Range -
13.6 m
Single Pass Depth
13.6 m (44.6 ft) Mast - Hole Depth Range -
Down to 37.9 m (Down to 124.6 ft)
Multi Pass Depth
13.6 m (44.6 ft) Mast - Pulldown Capacity Up to 29 483 kg (Up to 65,000 lb)
13.6 m (44.6 ft) Mast - Hoist Capacity Up to 22 113 kg (Up to 48,750 lb)
13.6 m (44.6 ft) Mast - Hoist Speed 0.66 m/s
13.6 m (44.6 ft) Mast - Bit Load - Single Pass Up to 32 655 kg (Up to 71,993 lb)
U.S. EPA Tier 2 Equivalent - Engine C27 ACERT™ @ 1,800 rpm
U.S. EPA Tier 2 Equivalent - Emissions U.S. EPA Tier 2 equivalent
U.S. EPA Tier 4 Final - Engine C27 ACERT @ 1,800 rpm
U.S. EPA Tier 4 Final - Emissions U.S. EPA Tier 4 Final
Compressor - Rotary Drilling 56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi)
38.2 m³/min (1,350 ft³/min) @ 34.4 bar (500
Compressor - DTH Drilling (1)
psi)
42.4 m³/min (1,500 ft³/min) @ 24.1 bar (350
Compressor - DTH Drilling (2)
psi)
Angle Drilling Vertical to 30° (in 5° increments)
U.S. EPA Tier 2 Equivalent - Power Rating
616.0 kW
(ISO 14396)
U.S. EPA Tier 4 Final - Power Rating (ISO
643.0 kW
14396)
1/14
2/6/2020 Print
ENGINE CHOICES
COMPRESSOR CHOICES
COOLING
2/14
2/6/2020 Print
CLIMATE CHOICES
3/14
2/6/2020 Print
UNDERCARRIAGE
4/14
2/6/2020 Print
HYDRAULICS
5/14
2/6/2020 Print
6/14
2/6/2020 Print
Water Injection plus Dry Dust Collector (2) Self-cleaning filters, dust chute with ejector
127 m³/min (4,500 ft³/min) dust collector;
Water Injection plus Dry Dust Collector (1)
includes standard water injection
Water Injection - Tank Mounted Below Front
1271.0 l
Deck
High Volume Water Injection - Maximum -
2786.0 l
Tanks Total Capacity
Tank Below Deck - Capacity - Isolated for
1271.0 l
Extreme Cold Weather
Tank Above Deck - Capacity 1514.0 l
Water flow meter, volume control, tank fill level
Choices (1)
indicator
Choices (2) Static dust curtains, four sided/boxed enclosed
Dust curtain hydraulic lifters raise front and
Choices (3) rear dust curtains (option) (recommended with
dust collector)
7/14
2/6/2020 Print
Choices (4) Tram off spray to wet the ground around the
cuttings pile (option)
8/14
2/6/2020 Print
MAST ACCESSORIES
OPERATOR ENVIRONMENT
9/14
2/6/2020 Print
10/14
2/6/2020 Print
PREMIUM CONTROLS
11/14
2/6/2020 Print
Components (2) Drill Assist (auto level, auto retract jacks, auto
raise and lower mast, single-pass auto drill)
Components (3) Product Link Elite
SERVICE PACKAGES
WEIGHTS
Fuel tank expansion of +1609 L (425 gal) for total of 3218 L (850 gal) (Required for
autonomy packages)
Platform on non-drill-end to mount fire suppression bottles and/or diesel gen set
MAST
Overhead winch assembly with cable and hook, plus with remote control; variable speed
drive with ≥ 1814 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck
Tool lubrication system for Rotary Drilling with 113.5 L (30 gal) capacity
Pipe thread greaser with reloadable tank for disposable grease bucket
SERVICE TOOLS
Work Tools
– Lifting bails (available on request; required for commissioning)
API thread 89 mm (3.5 in)
12/14
2/6/2020 Print
OPERATOR ENVIRONMENT
Window shades
Cab roof access system with ladder, cage and rails (only available with cascading stairs
and cab walkway)
TECHNOLOGY PRODUCTS
DUST SUPPRESSION
Dust curtains, four sides boxed in, with hydraulic lifters to raise front and rear dust curtains
(recommended with dust collector)
Obtain S/M/H codes from the Rock Formation to Bit Conversion table
https://catpublications.com search for PEXQ1027
Ship out plans for each drill configuration allow for one pallet of bits. Additional pallets may
require an additional truck.
– 171 mm (6.75 in), Option 1, (S2)
– 171 mm (6.75 in), Option 2, (M1)
– 171 mm (6.75 in), Option 3, (M3)
– 200 mm (7.875 in), Option 1, (S2)
– 200 mm (7.875 in), Option 2, (M1)
– 200 mm (7.875 in), Option 3, (M3)
13/14
2/6/2020 Print
DRILL PIPE*
Standard carousel pipe: 10.6 m (35 ft) pipes for 11.2 m (36.7 ft) Mast – Accepts quantity of
four (4)
– 127 mm (5.0 in)
– 140 mm (5.5 in)
– 152 mm (6.0 in)
– 165 mm (6.5 in)
– 178 mm (7.0 in)
– 194 mm (7.625 in)
Standard carousel pipe: 6.1 m (20 ft) pipes for 13.6 m (44.6 ft) Mast – Accepts quantity of
four (4)
– 127 mm (5.0 in)
– 140 mm (5.5 in)
– 152 mm (6.0 in)
– 165 mm (6.5 in)
– 178 mm (7.0 in)
– 194 mm (7.625 in)
Standard carousel pipe: 10.6 m (35 ft) pipe for 11.2 m (36.7 ft) Mast – Accepts quantity of
two (2)
– Quantity of two (2) 7.62 m (25 ft) pipes with adaptors to connect to DTH hammer or
tricone bit (hammer and tricone bit not included)
– 140 mm (5.5 in)
– 168 mm (6.625 in)
14/14