Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
bat plush
embroidery instructions
pumpkin bat
materials & tools:
• standard bat:
9" x 10" piece of fabric for head (A)
embroidery
• mini bat:
8" x 9" piece of fabric for head (A)
embroidery
• black thread for face
• medium-weight cut-away
stabilizer
• water soluble stabilizer (if using
minky)
• basic embroidery tools
(embroidery machine, embroidery
scissors, spray adhesive,
bobbin thread, sewing needles,
embroidery hoops, masking tape)
skeleton bat
materials & tools:
• standard bat:
9" x 10" piece of fabric for head (A) embroidery
7" x 8" piece of fabric for body (B) embroidery
Two 7" x 10" pieces of fabric for wing (C)
embroidery
• mini bat:
8" x 9" piece of fabric for head (A) embroidery
6" x 7" piece of fabric for body (B) embroidery
Two 6" x 8" pieces of fabric for wing (C)
embroidery
• black thread for face
• white thread for bones
• medium-weight cut-away stabilizer
• water soluble stabilizer (if using minky)
• basic embroidery tools (embroidery machine,
embroidery scissors, spray adhesive, bobbin
thread, sewing needles, embroidery hoops,
masking tape)
PUMPKIN FACE:
SIZE: A
5" x 7" size:
125mm x 98mm (4.9 in x 3.9 in)
4" x 4" size:
95mm x 95mm (3.7 in x 3.7 in) B
COLORS:
Colors needed: 1
• face
Color changes: 2
FABRIC:
before you begin: • 9" x 10" or 8" x 9" piece of fabric for
load your file head (A) embroidery
• Load the file labeled
"Pumpkin Bat Face" into your
machine.
1 2 3
hoop
your
fabric and
add top
stabilizer
COLOR A
for 5" x 7" for 4" x 4" face
version: version: • Black works best for this step.
hoop your fabric hoop your fabric • But a bright accent color on a
stark background would look
• Hoop your head (A) fabric • The 4" x 4" version is placed interesting too.
and bottom stabilizer into an diagonally to fit in the hoop.
embroidery hoop 5" x 7" or • Be sure to use the Mini Bat
larger. head (A) for the 4" x 4"
• Hoop water-soluble stabilizer version (on page 12).
with the fabric, or tape it on • Place the paper pattern on
afterwards. top for help as a guide.
COLOR B
alignment guide
• Any color can be used for
this.
• This stitches out an
alignment guide for cutting
the fabric next.
5a 5b 5c
SKELETON FACE:
SIZE: A
5" x 7" size:
122mm x 96mm (4.8 in x 3.8 in)
4" x 4" size:
99mm x 80mm (3.9 in x 3.1 in) B
COLORS:
Colors needed: 1
• face
Color changes: 2
FABRIC:
before you begin: • 9" x 10" or 8" x 9" piece of fabric for
load your file head (A) embroidery
• Load the file labeled "Skeleton
Bat Face" into your machine.
1 2 3
hoop
your
fabric and
add top
stabilizer
COLOR A COLOR B
hoop your fabric face alignment guide
• Hoop your head (A) fabric • Black works best for this step. • Any color can be used for
and bottom stabilizer into an • But a bright accent color on this.
embroidery hoop 4" x 4" or black fabric would look very • This stitches out an
larger. striking too. alignment guide for cutting
• Hoop water-soluble stabilizer the fabric next.
with the fabric, or tape it on
afterwards.
4a 4b 4c
SKELETON BODY:
SIZE: A
5" x 7" size:
111mm x 142mm (4.4 in x 5.6 in)
4" x 4" size:
66mm x 89mm (2.6 in x 3.5 in) B
COLORS:
Colors needed: 1
• bones
Color changes: 2
FABRIC:
before you begin: • 7" x 8" or 6" x 7" piece of fabric for
load your file body (B) embroidery
• Load the file labeled "Skeleton
Bat Body" into your machine.
1 2 3
hoop
your
fabric and
add top
stabilizer
COLOR A COLOR B
hoop your fabric bones alignment guide
• Hoop your body (B) fabric • White is the typical color • Any color can be used for
and bottom stabilizer into an used for this step. this.
embroidery hoop 4" x 4" or • But another bright accent • This stitches out an
larger. color on a stark background alignment guide for cutting
• Hoop water-soluble stabilizer would work nicely too. the fabric next.
with the fabric, or tape it on
afterwards.
4a 4b 4c
SKELETON WING:
SIZE: A
5" x 7" size:
159mm x 94mm (6.3 in x 3.7 in)
4" x 4" size:
99mm x 94mm (3.9 in x 3.7 in) B
COLORS:
Colors needed: 1
• bones
Color changes: 2
FABRIC:
before you begin: • Two 7" x 10" or 6" x 8" pieces of
load your file fabric for wing (C) embroidery
• Load the file labeled "Skeleton
Bat Wings" into your
machine.
1 2 3
hoop
your
fabric and
add top
stabilizer
COLOR A
for 5" x 7" for 4" x 4" bones
version: version: • White is the typical color
hoop your fabric hoop your fabric used for this step.
• But another bright accent
• Hoop your wing (C) fabric • The 4" x 4" version is placed color on a stark background
and bottom stabilizer into an diagonally to fit in the hoop. would work nicely too.
embroidery hoop 5" x 7" or • Be sure to use the Mini
larger. Bat wing (C) for the 4" x 4"
• Hoop water-soluble stabilizer version (on page 13).
with the fabric, or tape it on • Place the paper pattern on
afterwards. top for help as a guide.
COLOR B
alignment guide
• Any color can be used for
this.
• This stitches out an
alignment guide for cutting
the fabric next.
5a 5b 5c
en
art
m
pla
ce
ce
m
pla
top
r
en
t
ea
NAP
STRETCH
¼” seam allowance
Cut 2 from inner ear fabric
Mini Bat Plush
Cut 2 from main fabric P A T T E R N
www.cholyknight.com
NAP
EARS (D)
HEAD FRONT/BACK (A)
Cut 2 from main fabric
¼” seam allowance
STRETCH
foldline
applique placement
t
op
en g
nin
ing ur
dar
for fort
tur
ing
om
nin
g pen
o
ott
b
nec
k pl ent
ace la cem
me k p
nt nec
pg. 1/2
wi
nt me
ng p
lace
lace
p
me
ng
nt
wi
NAP
g lin es
top stitchin
wing
STRETCH
STRETCH
Mini Bat Plush
P A T T E R N
www.cholyknight.com
NAP
BODY (B)
Cut 2 from main fabric
¼” seam allowance
WING (C)
¼” seam allowance
P A T T E R N
Cut 4 from main fabric