WIND LOAD CALCULATION (NSCP 2015) Kd = 0.85 G = gust-effect factor, see Section 207A.
PARAMETERS V = BASIC WIND SPEED Cp = external pressure coefficient from figures
WIND SPEED, V 250 KPH 207B.4-1, 207B.4-22 AND 207B.4-3 TOTAL HEIGHT, Z 23 M V= 69.44 m/s HEIGHT BOTTOM OF ROOF 21 M GCpi = internal pressure coefficient from Table DESIGN WIND PRESSURE FOR MWFRS (ENCLOSED AND 207A.11-1 HORIZONTAL DIMENSION 50 M PARTIALLY ENCLOSED RIGID BUILDINGS) PARALLEL TO WIND DIR., L HORIZONTAL DIMENSION 80 M NORMAL TO WIND DIR., B p = qGCp - qi(Gcpi) (N/m2) (207B.4-1) MEAN ROOF HEIGHT, H 2 M WIND PRESSURE AT ROOF BEAM: ROOF ANGLE, Θ 7 DEGREES WHERE: (WINDWARD Cp = 0.8) qi = qh for windward walls, side walls, leeward walls, A. VELOCITY PRESSURE and roofs of enclosed buildings and for negative P = (3.442 x 0.85 x 0.8) – (3.367 x 0.18) AT FULL HEIGHT () internal pressure evaluation in partially enclosed P = 1.73 kPa qz= 0.613 Kz Kzt Kd V2 building qz= 3.442 KPa 7 5 F = (1.73)( + )( 3 ) qi = qz for positive internal pressure evaluation in 2 2 AT MEAN ROOF HEIGHT partially enclosed buildings where height z is defined as the level of the highest opening in the building that F = 20.241 KN 2 qh = 0.613 Kz Kzt Kd V could affect the positive internal pressure. For building sited in wand-borne debris region, glazing qh= 3.367 KPa that is not impact resistant or protected with an (LEEWARD Cp = -0.3) WHEREIN: impact resistant covering shall be treated as an P = (3.367 x 0.85 x -0.3) – (3.442 x -0.18) opening in accordance with Section 207A.10.3. Kz= VELOCITY PRESSURE COEFFICIENT P = 0.24 kPa For positive internal pressure evaluation, qi may Kz at total height = 1.34 conservatively be evaluated at height h(qi = qh). 7 5 F = (0.24)( + )( 3 ) 2 2 Kz at mean height = 1.37 q = qh for leeward walls, side walls, and roofs, evaluated at height h. F = 4.32 KN Kzt= TOPOGRAPHIC FACTOR
Kzt = 1 q = qz for windward walls evaluated at height z above
the ground. USE FOR 2ND, 3RD AND 4TH FLOOR BEAMS Kd = Wind Directionality Factor