Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Name of the work: Urgent Repairs to Reception room and other repairs in DISHA (Women) Police
station in Kurnool
Plastering with cement mortor (1:5) 12 mm thick for walls including cost
and conveyance of all materials like, cement, sand, labour charges, curing
7
and all operational and incidental charges such as scaffolding charges etc.,
complete for finished item of work. APSS.NO.901 & 903 )
Plastering with cement mortor (1:3) 20 mm thick for walls including cost
and conveyance of all materials like, cement, sand, labour charges, curing
8
and all operational and incidental charges such as scaffolding charges etc.,
complete for finished item of work. APSS.NO.901 & 903 )
Leaky proof to
Councelling room 1 X 1 8.00 4.00 0.050 1.60
Impervious coat to
Councelling room 1 X 1 8.00 4.00 32.00
Seigniorage Charges
Qty in
S.No Description of Item Per Factor Amount
Cum in Rs.
1 Sand 48.66 Cum 100 4866
2 Metal 37.43 Cum 75 2807
2 Earth 0.00 Cum 30 0
Total 7674
CIVIL DATA 2018-19 : Page-11
D A T A ( SoR 2018-19)
Name of the work: Urgent Repairs to Reception room and other repairs in DISHA (Women) Police station in
Kurnool
DATA
Sl.
Description Quantity Rate (Rs.) Per Unit
No.
1 Dismantling, clearing away and careful disposal of unserviceable materials with 100m leadincluding all labou
charges etc., complete
a) Brick masonry
(BLD-CSTN-14-9/299)
Mazdoor(unskilled) 0.409 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 163.60
Rate per 1 cum
Overheads&Contractors Profit @13.615% 0.00000 204.50
Rate per 1 cum
Rate as per SSR 10.00 sqm 60.00 10 sqm
Add for MA @ 25% 0.25 60.00
Rate per 10 sqm
Rate per 1 sqm
Overheads&Contractors Profit @13.615% 0.00000 7.50
Rate per 1 sqm
say
D A T A ( SoR 2018-19)
ption room and other repairs in DISHA (Women) Police station in
Kurnool
DATA
Amount
(Rs.)
ul disposal of unserviceable materials with 100m leadincluding all labour
163.60
40.90
204.50
0.00
204.50
60.00
15.00
75.00
7.50
0.00
7.50
8
361.00
90.25
451.25
0.00
451.25
451
CIVIL DATA 2018-19 : Page-13
D A T A ( SoR 2018-19)
DATA
Sl.
Description Quantity Rate (Rs.) Per Unit
No.
1 Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable
materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before
dismantling including all labour charges , overheads & contractor profit etc., complete
a) Brick masonry
(BLD-CSTN-14-9/299)
Mazdoor(unskilled) 0.409 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 163.60
Rate per 1 cum
Overheads&Contractors Profit @13.615% 0.00000 204.50
Rate per 1 cum
say
say
CIVIL DATA 2018-19 : Page-16
l) Clean removal of lime plaster from walls and raking out joints 20mm deep
or from terraced roof and raking out joints 100 mm deep
Rate as per SSR 10.00 sqm 40.00 10 sqm
Add for MA @ 25% 0.25 40.00
Rate per 10 sqm
Rate per 1 sqm
Overheads&Contractors Profit @13.615% 0.00000 5.00
Rate per 1 sqm
say
m) Clean removal of cement plaster from walls and raking out joint 200 mm deep
Rate as per SSR 10.00 sqm 50.00 10 sqm
Add for MA @ 25% 0.25 50.00
Rate per 10 sqm
Rate per 1 sqm
CIVIL DATA 2018-19 : Page-17
2 Dismantling doors , windows and clear storey windows, Ventilators etc., ( wood or steel ) shutters including
Chowkhats , architraves,hold fasts and other attachments etc., and stacking them within 100m lead including
labour charge etc., and overheads & contractors profit complete for finished item of work
(BLD-CSTN-14-11)
a) Not exceeding 3 sqm in area :
Details of cost per each :
2nd class mason 0.10 Nos. 440.00 1 No.
Mazdoor(Male) 0.20 Nos. 400.00 1 No.
2nd class Blacksmith 0.05 Nos. 440.00 1 No.
Add for MA @ 25% 0.25 146.00
3 Dismantling of existing dilapidated buildings including items like un-reinforced concrete, reinforced concrete
brick masonry, stone masonry etc., using Dozer (D 50) including all hire, operational, incidental, labour charges
and overheads & contractors profit etc. complete finished item of work
4 Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall
in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including a
operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads &
contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS
308)
(BLD-CSTN-2-1)
Ordinary Soil - Manual Means up to 3m depth
Unit : 1 cum
Taking output : 10.00 cum
a) Labour
Mazdoor ( Unskilled) 3.64 Nos. 400.00 1 No.
Add for MA @ 25% 0.25 1456.00
b&c)
Overheads&Contractors Profit @13.615% 0.00000 1820.00
Cost for 10 cum ( a+b+c)
Rate per cum (a+b+c) / 10
Rate per 1 cum Say
CIVIL DATA 2018-19 : Page-19
5 Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing
on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental
labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete
for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
(BLKD-CSTN-2-2)
Ordinary Soil - Mechanical Means up to 3m depth
Unit : 1 cum
Taking output : 240.00 cum
a) Labour
Mazdoor ( Unskilled) 8.32 Nos. 400.00 1 No.
Add for MA @ 25% 0.25 3328.00
b) Machinery
Shovel 0.85 cum 110hp 6.00 hours 2534.20 1 Hour
Crew charges 6.00 hours 257.40 1 Hour
Add MA on crew charges 0.25 1544.40
c&d)
Overheads&Contractors Profit @13.615% 0.00000 21295.70
Cost for 240 cum ( a+b+c+d)
Rate per 1 cum (a+b+c+d) / 240
Say
6 Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing
on bank for all lifts and with an initial lead of 10m and 3m to 6m depth including all operational,incidental
labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete
for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
(BLKD-CSTN-2-3)
Ordinary Soil - Mechanical Means up to 3m to 6m depth
Unit : 1 cum
Taking output : 210.00 cum
a) Labour
Mazdoor ( Unskilled) 8.32 Nos. 400.00 1 No.
Add for MA @ 25% 0.25 3328.00
b) Machinery
Shovel 0.85 cum 110hp 6.00 hours 2534.20 1 Hour
Crew charges 6.00 hours 257.40 1 Hour
Add MA on crew charges 0.25 1544.40
c&d)
Overheads&Contractors Profit @13.615% 0.00000 21295.70
Cost for 210 cum ( a+b+c+d)
Rate per 1 cum (a+b+c+d) / 210
Rate per 1 cum Say
7 Earth work excavation for foundations (Manual Means) of buildings in ordinary rock ( not requiring
blasting ) and depositing on bank with an initial lead of 10m and depth up to 3m including a
operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads &
contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS
308)
(BLD-CSTN-2-4)
Ordinary rock(not requiring blasting) - Manual Means up to 3m depth
Unit : 1 cum
Taking output : 10.00 cum
a) Labour
Mazdoor ( Unskilled) 5.20 Nos. 400.00 1 No.
Add for MA @ 25% 0.25 2080.00
CIVIL DATA 2018-19 : Page-20
b&c)
Overheads&Contractors Profit @13.615% 0.00000 2600.00
Cost for 10 cum ( a+b+c)
Rate per 1 cum (a+b+c) / 10
Rate per 1 cum Say
8 Earth work excavation for foundations (Mechanical Means) for buildings in ordinary rock (not requiring
blasting) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including a
operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads &
contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS
308)
(BLKD-CSTN-2-5)
Ordinary rock(not requiring blasting)- Mechanical Means up to 3m depth
Unit : 1 cum
Taking output : 180.00 cum
a) Labour
Mazdoor ( Unskilled) 6.24 Nos. 400.00 1 No.
Add for MA @ 25% 0.25 2496.00
b) Machinery
Shovel 0.85 cum 110hp 6.00 hours 2534.20 1 Hour
Crew charges 6.00 hours 257.40 1 Hour
Add MA on crew charges 0.25 1544.40
c&d)
Overheads&Contractors Profit @13.615% 0.00000 20255.70
Cost for 180 cum ( a+b+c+d)
Rate per 1 cum (a+b+c+d) / 180
Rate per 1 cum Say
9 Earth work excavation for foundations for buildings in hard rock (requiring blasting) and depositing on
bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labou
charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete fo
finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
(BLKD-CSTN-2-6)
Hard rock (requiring blasting)- up to 3m depth
Unit : 1 cum
Taking output : 10.00 cum
a) Labour
Driller 0.50 Nos. 490.00 1 No.
Blaster 0.25 Nos. 550.00 1 No.
Mazdoor ( Unskilled) 8.35 Nos. 400.00 1 No.
Add for MA @ 25% 0.25 3722.50
b) Machinery
Air compressor 7cmm (diesel) 1.00 hour 1133.70 1 Hour
Jack hammer/Pneumatic braker 2.00 hours 16.10 1 Hour
Crew charges
Air compressor 1.00 Hours 232.10 1 Hour
Jack hammer/Pneumatic braker 2.00 Hours 362.70 1 Hour
Add MA on crew charges 0.25 957.50
c)Material
Gelatin 80% 3.50 Kgs 57.00 1 Kg
Detonator electric 14 Nos. 9.00 1 No.
c&d)
Overheads&Contractors Profit @13.615% 0.00000 7341.40
Cost for 10 cum ( a+b+c+d)
CIVIL DATA 2018-19 : Page-21
10 Earth work excavation for foundations for buildings in hard rock (blasting prohibited) and depositing on
bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labou
charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete fo
finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
(BLKD-CSTN-2-7)
Hard rock (blasting prohibited)- up to 3m depth
Unit : 1 cum
Taking output : 10.00 cum
a) Labour
Mazdoor ( Unskilled) 5.20 Nos. 400.00 1 No.
Add for MA @ 25% 0.25 2080.00
b) Machinery
Air compressor 6.00 Hours 1133.70 1 Hour
Jack hammer/Pneumatic braker 12.00 Hours 16.10 1 Hour
Crew charges
Air compressor 6.00 Hours 232.10 1 Hour
Jack hammer/Pneumatic braker 12.00 Hours 362.70 1 Hour
Add MA on crew charges 0.25 5745.00
c&d)
Overheads&Contractors Profit @13.615% 0.00000 16776.65
Cost for 10 cum ( a+b+c+d)
Rate per 1 cum (a+b+c+d) / 10
Rate per 1 cum Say
11 Conveyance of un-useful excavated earth to a distance of 5 KM for disposal including hire charges of T &
P, labour charges etc., and overheads & contractors profit complete for finished item of work.
12 Pre construction Anti termite treatment is a process in which chemical toxic to subterrean tremites is apply
inject into soil during early stage of building Construction 2. Treatement of soil Beneath the building and around
the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC
registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels
terminates & impervious to tremite entry 3. Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and
apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums
plinth beams (Back filling) walls and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm o
the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres
Line meter at expansion joints. The substructure of a depth of 500mm around coulmns & 300mm deep around
plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost &
Conveyance of all materials to the site, cost of labour for sparying, rodding, overheads and contractor profit etc
complete for furnished item of work as per the approval of the Engineer-in-charge
Unit : 1 sqm
Rate as per SoR 1 sqm 150.00 1 sqm
Overheads&Contractors Profit @13.615% 0.00000 150.00
Rate per 1 sqm
CIVIL DATA 2018-19 : Page-23
13 Filling with carted coarse sand in trenches, sides of foundations and basement with initial lead in layers no
exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and al
peraitonal,incidental ,labour charges,hire charges of T&P etc., and overheads & contractors profit complete fo
fnished item of work(APSS NO.309&310)
14 Filling with carted gravel in trenches,sides of foundations and basement with initial lead in layers not exceeding
15cm thick,watering and ramming including cost and conveyance of water to work site and a
peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete fo
fnished item of work(APSS NO.309&310)
15 Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides o
foundations with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and
conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and
overheads & contractors profit complete for fnished item of work (APSS NO.309&310)
16 Filling with useful available excavated earth (excluding rock) with a lead of 50 m in basement with initial lead
in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site
and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profi
complete for fnished item of work (APSS NO.309&310)
17 Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations using coarse
aggregate 40mm size hard , machine crushed granite from approved quarry using concrete Mixer 10 / 7 cf
(0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, sand, coarse aggregate
water etc. to site including all charges for machine mixing and hire charges of concrete mixer, laying concrete in
foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing
etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 402)
(BLD-CSTN-3-5)
Unit : 1 cum
A.MATERIALS :
Cement 162.00 Kgs 3900.00 1000 Kgs
Coarse aggregate 40mm 0.90 Cum 962.85 1 Cum
Fine aggregate ( Sand ) 0.45 Cum 604.69 1 Cum
Water (including curing) 1.20 kl 103.00 1 kl
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8
cum)capacity 1.00 hour 147.70 1 hour
Crew charges 1.00 hour 241.80 1 hour
Add MA on crew charges 0.25 241.80
C.LABOUR :
1st class mason 0.10 Nos. 475.00 1 Each
Mazdoor (unskilled) 1.39 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 603.50
Rate per 1 cum
Overheads&Contractors Profit @13.615% 0.00000 3098.40
Rate per 1 cum
Say
18 Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) for foundations and unde
flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry using
concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement
sand, coarse aggregate, water etc. to site including all charges for machine mixing and hire charges of concrete
mixer, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the
required level curing etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 402)
(BLD-CSTN-3-7)
Unit : 1 cum
A.MATERIALS :
Cement 129.60 Kgs 3900.00 1000 Kgs
CIVIL DATA 2018-19 : Page-25
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
capacity 1.00 hour 147.70 1 hour
Crew charges 1.00 hour 241.80 1 hour
Add MA on crew charges 0.25 241.80
C.LABOUR :
1st class mason 0.10 Nos. 475.00 1 Each
Mazdoor (unskilled) 1.39 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 603.50
Rate per 1 cum
Overheads&Contractors Profit @13.615% 0.00000 2972.04
Rate per 1 cum
Say
19 Random Rubble stone masonry in CM (1:8) prop: (Cement: Sand) using hard other than granite stones
carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water
stones etc., from approved quarry, to site, including labour for cutting stones to required size and shape, mixing
of cement, mortar, construction, curing etc.,and overheads & contractors profit complete for finished item o
work in foundation and basement. (APSS No. 601 & 615)
( BLD-CSTN-6-13 )
Unit = 1 cum
A.MATERIALS
Cement 59.40 Kgs 3900.00 1000 Kgs
Rough stone (OTG) 1.10 Cum 414.29 1 Cum
Fine aggregate(sand) 0.33 Cum 686.69 1 Cum
B) LABOUR
1st class mason 1.20 Nos. 475.00 1 Each
Mazdoor (unskilled) 2.00 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 1370.00
20 Random Rubble stone masonry in CM (1:8) prop: (Cement: Sand) using hard granite stones carted from
approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc.
from approved quarry, to site including labour for cutting stones to required size and shape, mixing, of cement
mortar, construction, curing etc.,and overheads & contractors profit complete for finished item of work in
foundation and basement. (APSS No. 601 & 615)
( BLD-CSTN-6-13 )
Unit = 1 cum
A.MATERIALS
Cement 59.40 Kgs 3900.00 1000 Kgs
Rough stone (HBG) 1.10 Cum 574.38 1 Cum
Fine aggregate(sand) 0.33 Cum 686.69 1 Cum
B) LABOUR
1st class mason 1.20 Nos. 475.00 1 Each
Mazdoor (unskilled) 2.00 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 1370.00
21 Vibrated Plain Cement Concrete (1:3:6) nominal mix using 40mm size machine crushed hard granite meta
and 20mm graded machine crushed hard granite metal (coarse aggregate) in (2:1) ratio from approved quarry
using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like
cement, fine aggregate (sand), coarse aggregate, water etc. to site, all charges for mixing and hire charges o
concrete mixer, laying concrete in position, vibrating, curing, centering charges, overheads & contractors profi
etc.,for finished item of work for footings and basement .
22 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cemen
content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse
aggregate, water etc., to site, centering using steel scaffolding pipes , jack props , wallers , foot plates
brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh
batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and overheads &
contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS
No. 402)
(BLD-CSTN-3-14)
FOUNDATIONS , PLINTH , PEDESTALS ( Below Plinth)
A.MATERIALS :
Cement 380.00 Kgs 3900.00 1000 Kgs
20mm HBG graded metal 0.80 Cum 1298.26 1 Cum
Sand 0.40 Cum 604.69 1 Cum
B.LABOUR :
1st class Mason 0.133 Nos 475.00 1 Each
2nd class Mason 0.267 Nos 440.00 1 Each
Mazdoor (both men&women) 4.60 Nos 400.00 1 Each
Add for MA @ 25% 0.25 2020.66
CIVIL DATA 2018-19 : Page-28
C.MACHINERY :
Batching plant 0.50 cum 1.333 hours 220.80 1 hour
Crew charges 1.333 hours 370.60 1 hour
Needle vibrator 40mm ( petrol ) 1.333 hours 29.40 1 hour
Crew charges 1.333 hours 174.10 1 hour
Add MA on crew charges 0.25 726.09
Water(including for curing) 1.20 kl 103.00 1 kl
Rate per 1 cum
a Footings
Rate for Design mix M 25 1.00 Cum 6653.03 1 Cum
Hire charges of centering and scaffolding 1.00 Cum 288.00 1 Cum
Labour charges 1.00 Cum 631.00 1 Cum
Add for MA @ 25% 0.25 631.00
c Plinth Beams
Rate for Design mix M 25 1.00 Cum 6653.03 1 Cum
Hire charges of centering and scaffolding 1.00 Cum 695.00 1 Cum
Labour charges 1.00 Cum 760.50 1 Cum
Add for MA @ 25% 0.25 760.50
23 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cemen
content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse
aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood
posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine
mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc.,
complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
(BLD-CSTN-3-15)
COLUMNS, LINTELS, WATER TANKS, RCC WALL IN BUILDINGS:
CIVIL DATA 2018-19 : Page-29
A.MATERIALS :
Cement 380.00 Kgs 3900.00 1000 Kgs
20mm HBG graded metal 0.80 Cum 1298.26 1 Cum
Sand 0.40 Cum 604.69 1 Cum
B.LABOUR :
1st class Mason 0.167 Nos 475.00 1 Each
2nd class Mason 0.167 Nos 440.00 1 Each
Mazdoor (both men&women) 5.60 Nos 400.00 1 Each
Add for MA @ 25% 0.25 2392.81
CIVIL DATA 2018-19 : Page-30
C.MACHINERY :
Batching plant 0.50 cum 1.333 hours 220.80 1 hour
Crew charges 1.333 hours 370.60 1 hour
Needle vibrator 40mm ( petrol ) 1.333 hours 29.40 1 hour
Crew charges 1.333 hours 174.10 1 hour
Add MA on crew charges 0.25 726.09
Water(including for curing) 1.20 kl 103.00 1 kl
Rate per 1 cum
a) COLUMNS :
un supported height up to 3.66 m
Rate for other Floors FF SF
Rate as above 7118.21 7118.21
Hire charges of centering and scaffolding 238.00 238.00
Labour charges 1757.00 1933.00
Add for MA @ 25% 439.25 483.25
Lift charges of materials(Manual) 0.00 239.28
Add for MA @ 25% 0.00 59.82
Rate per 1 cum 9552.46 10071.56
Overheads&Contractors Profit @13.615% 0.00 0.00
Rate per 1 cum 9552.46 10071.56
Say 9552 10072
b) LINTELS :
Rate for other Floors FF SF
Rate as above 7118.21 7118.21
Hire charges of centering and scaffolding 790.00 790.00
Labour charges 1251.00 1376.00
Add for MA @ 25% 312.75 344.00
Lift charges of materials(Manual) 0.00 239.28
Add for MA @ 25% 0.00 59.82
Rate per 1 cum 9471.96 9927.31
Overheads&Contractors Profit @13.615% 0.00 0.00
Rate per 1 cum 9471.96 9927.31
Say 9472 9927
C) SIDE WALLS
i) 150mm thick side walls
Cost of M 25 design mix 0.15 cum 7118.21 1.00 cum
24 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cemen
content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine
crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from
approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse
aggregate, water etc., to site, centering using casurina ballies, bamboos, wooden reapers, runners, wood
posts, wall plates etc., including all operational, incidental and labour charges such as weigh batching, machine
mixing, lifting of concrete manually, laying concrete, vibrating, curing , overheads & contractors profit etc.,
complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
(BLD-CSTN-3-16)
RCC SLABS , BEAMS :
A.MATERIALS :
Cement 380.00 Kgs 3900.00 1000 Kgs
20mm HBG graded metal 0.80 Cum 1298.26 1 Cum
Sand 0.40 Cum 604.69 1 Cum
B.LABOUR :
1st class Mason 0.067 Nos 475.00 1 Each
2nd class Mason 0.133 Nos 440.00 1 Each
Mazdoor (both men&women) 3.077 Nos 400.00 1 Each
Add for MA @ 25% 0.25 1321.15
C.MACHINERY :
Batching plant 0.50 cum 0.308 hours 220.80 1 hour
Crew charges 0.308 hours 370.60 1 hour
Needle vibrator 40mm ( petrol ) 0.308 hours 29.40 1 hour
Crew charges 0.308 hours 174.10 1 hour
Add MA on crew charges 0.25 167.77
Water(including for curing) 1.20 kl 103.00 1 kl
Rate per 1 cum
A) BEAMS :
un supported height up to 3.66 m
Rate for other Floors FF SF
Rate as above 4824.29 4824.29
Hire charges of centering and scaffolding 1395.00 1395.00
Labour , lift charges for scaffolding 1473.00 1620.00
Add for MA @ 25% 368.25 405.00
Lift charges of materials(Manual) 0.00 132.11
Add for MA @ 25% 0.00 33.03
Rate for 1 cum 8060.54 8409.43
Overheads&Contractors Profit @13.615% 0 0
Rate per 1 cum 8060.54 8409.43
Say 8061 8409
B) RCC SLABS :
a) Roof Slabs 115mm thick :
un supported height up to 3.66 m
Rate for Design mix M 25 0.115 Cum 4824.29 1 Cum
25 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cemen
content of 380 kgs per 1 cum of concrete using weigh batcher / mixer with 20mm size graded machine crushed
hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc.
to site, centering using casurina ballies , bamboos , wooden reapers , runners , wood posts , wall plates
etc., for 60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average
thickness of 6.25cm including all operational, incidental and labour charges such as weigh batching, machine
mixing, lifting of concrete manually, laying concrete, curing, overheads & contractors profit complete etc., bu
excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402, 403 & 903)
(BLD-CSTN-3-16)
A.MATERIALS :
Cement 380.00 Kgs 3900.00 1000 Kgs
20mm HBG graded metal 0.80 Cum 1298.26 1 Cum
Sand 0.40 Cum 604.69 1 Cum
B.LABOUR :
1st class Mason 0.067 Nos 475.00 1 Each
2nd class Mason 0.133 Nos 440.00 1 Each
Mazdoor (both men&women) 3.077 Nos 400.00 1 Each
Add for MA @ 25% 0.25 1321.15
C.MACHINERY :
Batching plant 0.50 cum 0.308 hours 220.80 1 hour
Crew charges 0.308 hours 370.60 1 hour
Add MA on crew charges 0.25 114.14
Water(including for curing) 1.20 kl 103.00 1 kl
Rate per 1 cum
26 Brick masonry for panel walls in superstructure with CM (1:8) prop: (Cement : Sand) using common burn
clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from
approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of al
materials like cement, screened sand, bricks, water etc., to site, labour charges, like mixing cement mortar
scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete
for finished item of work. (APSS No. 501 & 504).
(BLD-CSTN-5-5)
Unit : 1cum
CIVIL DATA 2018-19 : Page-35
A.MATERIALS :
Cement 36.00 Kgs 3900.00 1000 Kgs
Common burnt clay bricks 23x11x7cms 512 Nos 6303.68 1000 Nos
Fine aggregate ( Sand ) 0.20 cu.m. 686.69 1 cu.m.
B.LABOUR :
1st class mason 0.24 Nos. 475.00 1 Each
2nd class mason 0.56 Nos. 440.00 1 Each
Mazdoor (Unskilled) 1.89 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 1116.40
water charges @ 1% 0.01 4900.72
Rate per 1 cum
a Up to basement
Rate as worked out above 1.00 Cum 4949.73 1 Cum
Overheads&Contractors Profit @13.615% 0.00000 4949.73
Rate per 1 cum
Say
b) Superstructure :
Rate for other Floors FF SF TF 4F 5F
Rate as worked out above 4949.73 4949.73 4949.73 4949.73 4949.73
Hire charges for Access Scaffolding 44.87 44.87 44.87 44.87 44.87
Labour charges for scaffolding 345.48 494.70 643.87 793.09 942.26
Add for MA @ 25% 86.37 123.68 160.97 198.27 235.57
Lift charges ( Page 131 of Std. Data ) 0.00 111.64 223.28 334.92 446.56
Add for MA @ 25% 0.00 27.91 55.82 83.73 111.64
Rate per 1 cum 5426.45 5752.52 6078.54 6404.61 6730.62
Overheads&Contractors Profit @13.615% 0 0 0 0 0.00
Rate per 1 cum 5426.45 5752.52 6078.54 6404.61 6730.62
Say 5426 5753 6079 6405 6731
27 Reinforced Brick Masonry for partition walls (11.0 cm thick) in CM (1:4) prop. (Cement : Sand) using
common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x
7 cms from approved source having minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos. of 6mm M.S
plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls
where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to
site, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges
constructing masonry, lift charges, curing, etc., and overheads & contractors profit but excluding cost of stee
and its fabrication charges complete for finished item of work. (APSS No. of 501 & 509)
(BLD-CSTN-5-12)
Unit - 10sqm
A.MATERIALS :
Common burnt clay bricks 23x11x7cms 565 Nos. 6303.68 1000 Nos.
Cement 79.20 Kgs 3900.00 1000 Kgs
Fine aggregate ( Sand ) 0.22 cu.m. 686.69 1 cu.m.
B.LABOUR :
1st class mason 0.60 Nos. 475.00 1 Each
2nd class mason 0.60 Nos. 440.00 1 Each
Mazdoor (Unskilled) 2.75 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 1649.00
water charges @ 1% 0.01 6082.78
Rate per 10 sqm
Rate per 1 sqm
28 Masonry work in CM(1:6) prop (Cement : Sand) in superstructure with fly ash cement / lime solid blocks o
size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm
including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, labour charges, like
mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrcto
profit etc., complete for finished item of work. (APSS No. 501 & 504).
(BLD-CSTN-5-17)
Unit = 1 Cum
A.MATERIALS
No of blocks required for
1 Cum of Masonry 110 Nos 24782.07 1000 Nos
Cement 24.00 Kgs 3900.00 1000 Kgs
Fine aggregate ( Sand ) 0.10 cu.m. 686.69 1 cu.m.
B .LABOUR
1st class mason 0.24 Nos. 475.00 1 Each
2nd class mason 0.56 Nos. 440.00 1 Each
Mazdoor (Unskilled) 1.89 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 1116.40
water charges @ 1% 0.01 4283.80
Rate per 1 cum
b) Superstructure :
Rate for other Floors FF SF TF 4F 5F
Rate as worked out above 4326.63 4326.63 4326.63 4326.63 4326.63
Hire charges for Access Scaffolding 45.87 45.87 45.87 45.87 45.87
Labour charges for scaffolding 353.16 505.69 658.18 810.71 963.20
Add for MA @ 25% 88.29 126.42 164.55 202.68 240.80
Lift charges ( Page 131 of Std. Data ) 0.00 111.64 223.28 334.92 446.56
Add for MA @ 25% 0.00 27.91 55.82 83.73 111.64
4813.95 5144.16 5474.33 5804.54 6134.70
Overheads&Contractors Profit @13.615% 0.00 0.00 0.00 0.00 0.00
Rate per 1 cum 4813.95 5144.16 5474.33 5804.54 6134.70
Say 4814 5144 5474 5805 6135
29 Reinforced Masonry for partition walls (100 mm thick) in CM (1:4) prop. (Cement : Sand) using fly ash
cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50
Kg/Sq.cmand placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcemen
pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like
cement, steel, sand, bricks, water etc., to site, all operational, incidental charges such as labour charges fo
mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads &
contractors profit but excluding cost of steel and its fabrication charges complete for finished item of work
(APSS No. of 509)
(BLD-CSTN-5-12)
Unit - 10sqm
A.MATERIALS :
Flyash lime solid blocks 247 Nos. 10792.03 1000 Nos.
Cement 36.00 Kgs 3900.00 1000 Kgs
Fine aggregate ( Sand ) 0.10 cu.m. 686.69 1 cu.m.
B.LABOUR :
1st class mason 0.60 Nos. 475.00 1 Each
2nd class mason 0.60 Nos. 440.00 1 Each
Mazdoor (Unskilled) 2.75 Nos. 400.00 1 Each
CIVIL DATA 2018-19 : Page-38
Internal walls :
Rate for other Floors FF SF TF 4F 5F
Rate as worked out above 498.53 498.53 498.53 498.53 498.53
Hire charges for Access Scaffolding 10.32 10.32 10.32 10.32 10.32
Labour charges for scaffolding 79.46 113.78 148.09 182.41 216.72
Add for MA @ 25% 19.87 28.45 37.02 45.60 54.18
Lift charges ( Page 131 of Std. Data ) 0.00 16.49 32.98 49.47 65.96
Add for MA @ 25% 0.00 4.12 8.25 12.37 16.49
Rate per 1 sqm 608.18 671.69 735.19 798.70 862.20
Overheads&Contractors Profit @13.615% 0.00 0.00 0.00 0.00 0.00
Rate per 1 sqm 608.18 671.69 735.19 798.70 862.20
Say 608 672 735 799 862
30 Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite meta
(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry using concrete
Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine
aggregate(sand), coarse aggregate, water etc. to site including all charges for machine mixing, hire charges o
concrete mixer, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for bed
blocks & hold fasts for finished item of work. (APSS No. 402)
31 Plain Cement Concrete (1:2:4) using 20mm size graded machine crushed hard granite metal (coarse aggregate
- as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry using concrete Mixer 10 / 7 cft (0.2
0.8 cum) capacity including cost and conveyance of all materials like cement, fine aggregate(sand), coarse
aggregate, water etc. to site including all charges for machine mixing, hire charges of concrete mixer, laying
concrete in position, curing etc., & lift charges , and overheads & contractors profit for septic tank bed, in
sunken slabs for finished item of work. (APSS No. 402)
(BLD-CSTN-3-11)
Unit : 1cum
CIVIL DATA 2018-19 : Page-40
A.MATERIALS :
HBG 20mm size metal 0.90 Cum 1298.26 1 Cum
Sand 0.45 Cum 604.69 1 Cum
Cement 330.00 Kgs 3900.00 1 MT
Water ( including for curing ) 1.20 Kl 103.00 1 Kl
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8
cum)capacity 1.00 hour 147.70 1 hour
Crew Charges 1.00 hour 241.80 1 hour
Add MA on crew charges 0.25 241.80
C.LABOUR :
1st class mason 0.10 Nos. 475.00 1 Each
Mazdoor (Unskilled) 1.39 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 603.50
Rate per 1 cum
Overheads&Contractors Profit @13.615% 0.00000 4055.47
Rate per 1 cum
say
32 Plain Cement Concrete M 20 nominal mix using 20mm size graded machine crushed hard granite meta
(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry using concrete
Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine
aggregate(sand), coarse aggregate, water etc. to site including all charges centering, labour charges such as
weigh batching, machine mixing, hire charges of concrete mixer, laying concrete in position, curing etc., & lif
charges , and overheads & contractors profit for steps for finished item of work. (APSS No. 402)
(BLD-CSTN-3-11)
Unit : 1cum
A.MATERIALS :
HBG 20mm size metal 0.90 Cum 1298.26 1 Cum
Sand 0.45 Cum 604.69 1 Cum
Cement 330.00 Kgs 3900.00 1000 Kgs
Water ( including for curing ) 1.20 Kl 103.00 1 Kl
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8
cum)capacity 1.00 hour 147.70 1 hour
Crew Charges 1.00 hour 241.80 1 hour
Add MA on crew charges 0.25 241.80
Needle vibrator 40mm ( petrol ) 1.00 hours 29.40 1 hour
Crew charges 1.00 hours 174.10 1 hour
Add MA on crew charges 0.25 174.10
C.LABOUR :
1st class mason 0.100 Nos. 475.00 1 Each
Mazdoor (Unskilled) 1.390 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 603.50
Rate per 1 cum
33 Reinforced Cement Concrete M 20 nominal mix using 12mm size hard granite machine crushed graded
metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a
minimum quantity of 350 kgs. of cement per 1 cum of concrete using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum
capacity including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate
water etc., to site including centering, shuttering, labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing etc., and overheads & contractors profit complete
for finished item of work (APSS No. 402 & 403) for sill slabs.
(BLD-CSTN-3-13 - A)
A.MATERIALS :
Cement 330.00 Kgs 3900.00 1000 Kgs
12mm HBG graded metal 0.90 Cum 1103.05 1 Cum
Sand 0.45 Cum 604.69 1 Cum
B.LABOUR :
1st class Mason 0.133 Nos 475.00 1 Each
2nd class Mason 0.267 Nos 440.00 1 Each
Mazdoor (both Men & Women) 3.60 Nos 400.00 1 Each
Add for MA @ 25% 0.25 1620.66
C.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8
cum)capacity 1.00 hour 147.70 1 hour
Crew Charges 1.00 hour 241.80 1 hour
Add MA on crew charges 0.25 241.80
Water(including for curing) 1.20 kl 103.00 1 kl
Basic cost per 1 cum
34 Reinforced Cement Concrete M 20 nominal mix using 12mm size hard granite machine crushed graded
metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a
minimum quantity of 350 kgs. of cement per 1 cum of concrete using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum
capacity including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate
water etc., to site including centering, shuttering, labour charges such as weigh batching, machine mixing, hire
charges of concrete mixer, laying concrete, lift charges, curing etc., and overheads & contractors profit complete
for finished item of work (APSS No. 402 & 403) for platforms and shelves.
(BLD-CSTN-3-13 C)
A.MATERIALS :
Cement 330.00 Kgs 3900.00 1000 Kgs
12mm HBG graded metal 0.90 Cum 1103.05 1 Cum
Sand 0.45 Cum 604.69 1 Cum
B.LABOUR :
1st class Mason 0.067 Nos 475.00 1 Each
2nd class Mason 0.133 Nos 440.00 1 Each
Mazdoor (both men&women) 2.500 Nos 400.00 1 Each
Add for MA @ 25% 0.25 1090.35
C.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8
cum)capacity 1.00 hour 147.70 1 hour
CIVIL DATA 2018-19 : Page-43
35 Providing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters
for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes
placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire
of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and
conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cos
and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting
bending, placing in position, tying etc., and overheads & contractors profit complete for finished item of work
( APSS No.126)
36 Providing Mild steel (MS) steel bars (Fe 250 grade as per IS 432) of different diameters including labou
charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks o
approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills fo
reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars
including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding
wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position
tying etc., and overheads & contractors profit complete for finished item of work.( APSS No.126)
37 Ornamental ceiling plastering 12mm thick single coat in CM (1:5) using screened sand including cost and
conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on
materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in
charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)
38 Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coa
of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like
cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of al
labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed
by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS
901,903 & 904)
( BLD-CSTN-8-10)
Unit : 10 sqm
A.MATERIALS :
Base coat in CM(1:6) , 8mm thick
Cement 26.40 Kgs 3900.00 1000 Kgs
Fine aggregate (Sand) 0.11 Cum 686.69 1 Cum
Top coat in CM(1:4) , 4mm thick
Cement 14.40 Kgs 3900.00 1000 Kgs
Fine aggregate (Sand) 0.04 Cum 686.69 1 Cum
B.LABOUR :
1st Class Mason 0.63 Nos. 475.00 1 Each
2nd Class Mason 1.47 Nos. 440.00 1 Each
Mazdoor (Unskilled) 3.90 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 2506.05
water charges @ 1% 0.01 3394.69
Rate per 10 sqm
Rate per 1 sqm
Walls in superstructure :
Rate for other Floors FF SF TF 4F 5F
Rate as worked out above 342.86 342.86 342.86 342.86 342.86
Hire charges for Access Scaffolding 1.03 1.03 1.03 1.03 1.03
Labour charges for scaffolding 7.95 11.38 14.81 18.24 21.67
Add for MA @ 25% 1.99 2.85 3.70 4.56 5.42
Lift charges ( Page 131 of Std. Data ) 0.00 25.06 50.12 75.18 100.24
Add for MA @ 25% 0.00 6.27 12.53 18.80 25.06
Rate per 1 sqm 353.83 389.45 425.05 460.67 496.28
Overheads&Contractors Profit @13.615% 0.00 0.00 0.00 0.00 0.00
Rate per 1 sqm 353.83 389.45 425.05 460.67 496.28
Say 354 389 425 461 496
39 Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of a
materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including
cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and
overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)
a) for basement :
Rate per 1 sqm 1.00 sqm 254.13 1 sqm
Overheads&Contractors Profit @13.615% 0.00000 254.13
Rate per 1 sqm
Say
CIVIL DATA 2018-19 : Page-49
b) Walls in superstructure :
Rate for other Floors FF SF TF 4F 5F
Rate as worked out above 254.13 254.13 254.13 254.13 254.13
Hire charges for Access Scaffolding 1.03 1.03 1.03 1.03 1.03
Labour charges for scaffolding 7.95 11.38 14.81 18.24 21.67
Add for MA @ 25% 1.99 2.85 3.70 4.56 5.42
Lift charges ( Page 131 of Std. Data ) 0.00 17.96 35.92 53.87 71.83
Add for MA @ 25% 0.00 4.49 8.98 13.47 17.96
Rate per 1 sqm 265.10 291.84 318.57 345.30 372.04
Overheads&Contractors Profit @13.615% 0.00 0.00 0.00 0.00 0.00
Rate per 1 sqm 265.10 291.84 318.57 345.30 372.04
Say 265 292 319 345 372
40 Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and top
coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all materials like
cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of al
labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed
by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 &
904)
(BLD-CSTN-8-9)
Unit : 10 sqm
A.MATERIALS :
Base coat in CM(1:6) , 16mm thick
Cement 43.20 Kgs 3900.00 1000 Kgs
Fine aggregate (Sand) 0.18 Cum 686.69 1 Cum
Top coat in CM(1:4) , 4mm thick
Cement 14.40 Kgs 3900.00 1000 Kgs
Fine aggregate (Sand) 0.04 Cum 686.69 1 Cum
B.LABOUR :
1st Class Mason 0.63 Nos. 475.00 1 Each
2nd Class Mason 1.47 Nos. 440.00 1 Each
Mazdoor (Unskilled) 3.90 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 2506.05
water charges @ 1% 0.01 3508.27
Rate per 10 sqm
Rate per 1 sqm
Walls in superstructure :
Rate for other Floors FF SF TF 4F 5F
Rate as worked out above 354.34 354.34 354.34 354.34 354.34
Hire charges for Access Scaffolding 1.03 1.03 1.03 1.03 1.03
Labour charges for scaffolding 7.95 11.38 14.81 18.24 21.67
Add for MA @ 25% 1.99 2.85 3.70 4.56 5.42
Lift charges ( Page 131 of Std. Data ) 0.00 25.06 50.12 75.18 100.24
Add for MA @ 25% 0.00 6.27 12.53 18.80 25.06
Rate per 1 sqm 365.31 400.93 436.53 472.15 507.76
Overheads&Contractors Profit @13.615% 0.00 0.00 0.00 0.00 0.00
Rate per 1 sqm 365.31 400.93 436.53 472.15 507.76
Say 365 401 437 472 508
41 Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and conveyance of a
materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including
cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and
overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)
A.MATERIALS :
Cement 60.48 Kgs 3900.00 1000 Kgs
Fine aggregate (Sand) 0.21 Cum 686.69 1 Cum
CIVIL DATA 2018-19 : Page-51
B.LABOUR :
1st Class Mason 0.45 Nos. 475.00 1 Each
2nd Class Mason 1.05 Nos. 440.00 1 Each
Mazdoor (Unskilled) 2.80 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 1795.75
water charges @ 1% 0.01 2624.76
Rate per 10 sqm
Rate per 1 sqm
a) for basement :
Rate per 1 sqm 1.00 sqm 265.10 1 sqm
Overheads&Contractors Profit @13.615% 0.00000 265.10
Rate per 1 sqm
Say Say
b) Walls in superstructure :
Rate for other Floors FF SF TF 4F 5F
Rate as worked out above 265.10 265.10 265.10 265.10 265.10
Hire charges for Access Scaffolding 1.03 1.03 1.03 1.03 1.03
Labour charges for scaffolding 7.95 11.38 14.81 18.24 21.67
Add for MA @ 25% 1.99 2.85 3.70 4.56 5.42
Lift charges ( Page 131 of Std. Data ) 0.00 17.96 35.92 53.87 71.83
Add for MA @ 25% 0.00 4.49 8.98 13.47 17.96
276.07 302.81 329.54 356.27 383.01
Overheads&Contractors Profit @13.615% 0.00 0.00 0.00 0.00 0.00
Rate per 1 sqm 276.07 302.81 329.54 356.27 383.01
Say 276 303 330 356 383
42 Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using
screened sand 20mm thick (average) mixed with integral cement water proofing liquid confirming to IS: 2645
2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 200ml per one bag o
cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining
at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, wate
proofing compound, water etc., to site, operational, incidental, and labour charges for mixing mortar, laying, lif
charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and
overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).
(BLD-CSTN-10-25)
Unit : 10 sqm
A.MATERIALS :
Cement 100.80 Kgs 3900.00 1000 Kgs
Fine aggregate (Sand) 0.21 Cum 686.69 1 Cum
Integral cement waterproofing liquid 0.40 Ltrs 86.00 1.00 Ltrs
B.LABOUR :
1st Class Mason 0.66 Nos. 475.00 1 Each
2nd Class Mason 1.54 Nos. 440.00 1 Each
Mazdoor (Unskilled) 3.70 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 2471.10
water charges @ 1% 0.01 3660.60
Rate per 10 sqm
43 Providing impervious coat to exposed RCC roof slab surfaces of sump , sump side wall,sump bottom
slab,in side of septic tank , in sunken slabs etc. to required slopes with CM (1:3) prop. using screened sand
12mm thick mixed with integral cement water proofing liquid confirming to IS: 2645-2003 manufactured by
reputed manufacturers as approved by Engineer-in-charge at 200ml per one bag of cement, laid over roof slab
when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals o
45cmx45cm where ever necessary including cost and conveyance of all materials like cement, sand, wate
proofing compound, water etc., to site, operational, incidental, and labour charges for mixing mortar, laying, lif
charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and
overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).
44 RCM facia 50mm thick in CM(1:3) using screened sand for drop walls, fins with rabbit wire mesh & nomian
reinforcement as directred by Engineer - In - Charge with dubara sponge finishing,including cost and
conveyance of all materials to site, operationals &incidental,cost and conveyance of cement,wire mesh,water to
work site,centering,scaffolding and form work,lift charges etc., and overheads & contractors profit complete fo
finished item of work but excluding cost of steel and its fabrication charges for finished item of work(APSS
NO.403&903)
(BLD-CSTN-8-11)
Unit : 10 sqm
A)MATERIALS
Rabbit wire mesh 13.30 sqm 15.00 1 sqm
Cement for base coat and plastering 240.00 Kgs 3900.00 1000 Kgs
Cement for lumps 50.00 Kgs 3900.00 1000 Kgs
Fine aggregate (Sand) 0.50 cu.m. 686.69 1 cu.m.
Excluding TMT steel/mild steel & binding
wire
B) LABOUR CHARGES
1st Class Mason 8.00 Nos. 475.00 1 Each
Operator concrete mixer 1.00 Nos. 490.00 1 Each
Mazdoor (Unskilled) 10.00 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 8290.00
C)Machinery :
CIVIL DATA 2018-19 : Page-53
45 Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick set over a base coat of CM
(1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry o
honey like consistency spread @ 3.3 Kgs per sqm and jointed with neat cement to full depth including cost and
conveyance of all materials like cement, sand, water, flooring stones etc. complete including all labour charges
like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base
coat, water charges etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 &
701)
(BLD-CSTN-9-1)
Unit = 10 sqm.
A. MATERIALS:
Polished shahabad stone 15 to 18mm thick
11.00 sqm 2433.90 10 sqm
Cement for CM (1:8) proportion for base
coat 21.60 Kgs 3900.00 1000 Kgs
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs
Cement for pointing 20.00 Kgs 3900.00 1000 Kgs
Sand for CM(1:8) 0.12 Cum 686.69 1 Cum
B .LABOUR
Mason 1st class 3.10 Nos 475.00 1 Each
Mason 2nd class 1.10 Nos 440.00 1 Each
Mazdoor(un skilled) 0.86 Nos 400.00 1 Each
Add for MA @ 25% 0.25 2300.50
Add water charges 1% 0.01 5926.26
Rate for 10 sqm
46 Flooring with Polished black Kadapa slabs minimum of 15mm thick of size 0.457m x 0.457m set over a
base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including nea
cement slurry of honey like consistency spread @ 3.3 Kgs per sqm and jointed with neat cement to full depth
including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including
all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lif
charges , cost of base coat, water charges etc., and overheads & contractors profit complete for finished item o
work. (APSS No.703 & 701)
(BLD-CSTN-9-1)
Unit = 10 sqm.
A. MATERIALS:
Polished black Kadapa slabs minimum of
15mm thick 11.00 sqm 1609.19 10 sqm
Cement for CM (1:8) proportion for base
coat 21.60 Kgs 3900.00 1000 Kgs
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs
Cement for pointing 20.00 Kgs 3900.00 1000 Kgs
Sand for CM(1:8) 0.12 Cum 686.69 1 Cum
B .LABOUR
Mason 1st class 3.10 Nos 475.00 1 Each
Mason 2nd class 1.10 Nos 440.00 1 Each
Mazdoor(un skilled) 0.86 Nos 400.00 1 Each
Add for MA @ 25% 0.25 2300.50
Add water charges 1% 0.01 5019.08
Rate for 10 sqm
47 Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness
between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish
in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm
thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like
consistency spread @ 3.3 Kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigmen
of matching shade, including cost of all materials like cement, screened sand , water and tiles etc., and
overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)
(BLD-CSTN-9-6)
Unit = 10 sqm.
A. MATERIALS:
Ceramic tiles 7 to 8mm thick (300mm x
300mm) 10.50 sqm 411.00 1 sqm
Cement for CM(1:8) proportion for base
coat 21.60 Kgs 3900.00 1000 Kgs
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs
White Cement 2.00 Kgs 27.00 1 Kg
Sand for CM(1:8) 0.12 Cum 686.69 1 Cum
B .LABOUR
Mason 1st class 0.96 Nos 475.00 1 Each
Mason 2nd class 2.24 Nos 440.00 1 Each
Mazdoor(un skilled) 3.30 Nos 400.00 1 Each
CIVIL DATA 2018-19 : Page-56
48 Flooring with Non-skid red or white full body Ceramic floor tiles of size 400 x 400 mm and thickness
between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish
in all shades and designs as per the approved flooring pattern as directed by the Engineer-In -Charge, laying
tiles using spacers of 2mm thick, set over base coat of cement mortar (1:8), 12mm thick using screened sand
over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3
Kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade
including cost of all materials like cement, screened sand , water and tiles etc., and overheads & contractors
profit complete for finished item of work. (APSS No.701 & 707)
(BLD-CSTN-9-6)
Unit = 10 sqm.
A. MATERIALS:
Ceramic tiles 7 to 8mm thick (400mm x
400mm) 10.50 sqm 415.00 1 sqm
Cement for CM(1:8)proportion for base coat
21.60 Kgs 3900.00 1000 Kgs
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs
White Cement 2.00 Kgs 27.00 1 Kg
Sand for CM(1:8) 0.12 Cum 686.69 1 Cum
B .LABOUR
Mason 1st class 0.96 Nos 475.00 1 Each
Mason 2nd class 2.24 Nos 440.00 1 Each
Mazdoor(un skilled) 3.30 Nos 400.00 1 Each
Add for MA @ 25% 0.25 2761.60
Add water charges 1% 0.01 8158.84
Rate for 10 sqm
49 Flooring with soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm and
thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colou
and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by
the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm
thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey
like consistancy spread @ 3.3 kgs per sqm. and jointed neately with white cement paste to full depth mixed with
pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles
white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for
mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and
overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)
(BLD-CSTN-9-5)
Unit = 10 sqm.
A. MATERIALS:
Vitrified tiles 8 to 10mm thick of size
600mm x 600mm 10.50 sqm 418.00 1 sqm
Cement for CM(1:8)proportion for base coat
21.60 Kgs 3900.00 1000 Kgs
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs
White Cement 6.00 Kgs 27.00 1 Kg
Sand for CM(1:8) 0.12 Cum 686.69 1 Cum
B .LABOUR
Mason 1st class 0.96 Nos 475.00 1 Each
Mason 2nd class 2.24 Nos 440.00 1 Each
Mazdoor(un skilled) 3.30 Nos 400.00 1 Each
Add for MA @ 25% 0.25 2761.60
Add water charges 1% 0.01 8298.34
Rate for 10 sqm
50 Flooring with granite stone tiles 8mm thick (mirror polished of all shades) of 1st quality and of size as
approved by Engineer-in-charge with borders and design as per the approved flooring pattern as directed by the
Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm
thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey
like consistancy spread @ 3.3 kgs per sqm. and jointed neately with white cement paste to full depth mixed with
pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles
white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for
mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc., and
overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)
(BLD-CSTN-9-9)
Unit = 10 sqm.
A. MATERIALS:
Granite stone tiles 8mm thick (mirror
polished of all shades) 10.50 sqm 1005.00 1 sqm
Cement for CM(1:8) for base coat 21.60 Kgs 3900.00 1000 Kgs
Cement for slurry 33.00 Kgs 3900.00 1000 Kg
White Cement 6.00 Kgs 27.00 1 Kg
Sand for CM(1:8) 0.12 Cum 686.69 1 Cum
B .LABOUR
CIVIL DATA 2018-19 : Page-59
51 Flooring with 16 to 18mm thick high polished granite stone slabs other than black and regular colours
(i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as pe
the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cemen
mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey
cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste
mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement
sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing
charges, cost of base coat and overheads & contractors profit complete for finished item of work (S.S.701 &
special)
(BLD-CSTN-9-7)
Unit = 10 sqm.
A. MATERIALS:
High polished granite slabs other than black
16 to 18mm thick 10.50 sqm 2342.00 1 sqm
Cement for CM(1:8) for base coat 36.00 Kgs 3900.00 1000 Kgs
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs
White cement for jointing 6.00 Kgs 27.00 1 Kg
Sand for CM(1:8) 0.20 Cum 686.69 1 Cum
B .LABOUR
Mason 1st class 3.00 Nos 475.00 1 Each
Mason 2nd class 1.00 Nos 440.00 1 Each
Mazdoor(un skilled) 8.00 Nos 400.00 1 Each
Add for MA @ 25% 0.25 5065.00
Add water charges 1% 0.01 31490.69
Rate for 10 sqm
52 Flooring with 16 to 18 mm thick high polished granite stone slabs black colour as approved by the
Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick
using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like
consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment o
matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite
slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edge , polishing
charges, cost of base coat and overheads & contractors profit complete for finished item of work for platforms
(S.S.701 & special)
(BLD-CSTN-9-7)
Unit = 10 sqm.
A. MATERIALS:
High polished granite slabs black 16 to
18mm thick 10.50 sqm 1991.00 1 sqm
Cement for CM(1:8) for base coat 36.00 Kgs 3900.00 1000 Kgs
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs
White cement for jointing 6.00 Kgs 27.00 1 Kg
Sand for CM(1:8) 0.20 Cum 686.69 1 Cum
B .LABOUR
Mason 1st class 3.00 Nos 475.00 1 Each
Mason 2nd class 1.00 Nos 440.00 1 Each
Mazdoor(un skilled) 8.00 Nos 400.00 1 Each
Add for MA @ 25% 0.25 5065.00
Machine cutting charges 16.67 RM 17.00 1 RM
Half rounding the edges 16.67 RM 318.00 1 RM
Add for MA @ 25% 0.25 2233.78
Add water charges 1% 0.01 33948.08
Rate for 10 sqm
53 Granolithic Concrete flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine
crushed metal and screened sand laid over CC bed already laid or RCC roof slab, in alternate panels of size no
exceeding 1.50 m x 1.50 m, using glass strips and finishing the top surface to required smoothness and slopes
and thread lining including cost of all materials like cement, metal sand and water and overheads & contractors
profit complete for finished item of work. (APSS No.701 & 710)
(BLD-CSTN-9-13)
Unit : 10sqm
A.MATERIALS :
6mm to 12mm HBG Metal 0.17 Cum 1103.05 1 Cum
Cement 120.00 Kgs 3900.00 1000 Kgs
Sand 0.085 Cum 604.69 1 Cum
Add for glass strips 10.00 sqm 10.00 1 sqm
B. LABOUR
Mason 1st class 1.25 Nos. 475.00 1 Each
Mason 2nd class 0.06 Nos. 440.00 1 Each
Mazdoor (unskiled) 3.00 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 1820.15
Add water charges 1% 0.01 3082.10
Rate per 10 sqm
CIVIL DATA 2018-19 : Page-61
CIVIL DATA 2018-19 : Page-62
54 Flooring with chequered Cement Concrete heavy duty tiles conforming to IS: 13801 using aggregates
cement, pigments of size 300 x 300 mm and thickness 25 mm of any shades as approved by Engineer - In
Charge set over base coat of cement mortar (1:6), 12 mm thick using screened sand over CC bed alredy laid o
RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm and jointed with
neat white cement to full depth mixed with pigment of matching shade including cost and conveyance of al
materials like cement, sand, water and tiles etc.,and overheads & contractors profit complete for finished item o
work.
(BLD-CSTN-9-4)
Unit : 10sqm
A.MATERIALS :
Chequred tiles 25mm thick 10.50 sqm 256.00 1 sqm
Cement for CM(1:6) proportion for base
coat 28.80 Kgs 3900.00 1000 Kgs
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs
White cement for jointing & pointing 6.00 Kgs 27.00 1.00 Kgs
Sand for CM(1:6) proportion 0.12 Cum 686.69 1 Cum
B. LABOUR
Mason 1st class 0.96 Nos. 475.00 1 Each
Mason 2nd class 2.24 Nos. 440.00 1 Each
Mazdoor (unskiled) 3.30 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 2761.60
Add water charges 1% 0.01 6625.42
Rate per 10 sqm
55 Providing polished shahabad / Tandur stone slabs of 15mm to 18mm thick in single piece as specified se
over a base coat of CM (1:5) , 12mm thick using screened sand over already laid CC bed / RCC roof slab
including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm and jointed with neat cemen
to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc
complete including all labour charges like dressing of flooring stones to the required size, flat nosing the edges
mixing of cement mortar, laying, lift charges , cost of base coat, water charges etc., and overheads & contractors
profit complete for finished item of work for treads and risers. (APSS No.703 & 701)
56 Providing Polished black Kadapa slabs minimum of 15mm thick in single piece as specified set over a
base coat of CM (1:5) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including nea
cement slurry of honey like consistency spread @ 3.3 Kgs per sqm and jointed with neat cement to full depth
including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including
all labour charges like dressing of flooring stones to the required size, flat nosing the edges, mixing of cemen
mortar, laying, lift charges , cost of base coat, water charges etc., and overheads & contractors profit complete
for finished item of work for treads and risers. (APSS No.703 & 701)
57 Providing 16 to 18mm thick high polished granite stone slabs other than black and regular colours (i.e. o
shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the
pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cemen
mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey
cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste
mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement
sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the
edges of treads , polishing charges, cost of base coat and overheads & contractors profit complete for finished
item of work for treads and risers (S.S.701 & special)
58 Providing skirting to internal walls to 10.00 cm height with Polished Shahabad/Tandur stone slabs 15mm
to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand
with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles
cement, sand and water etc., complete and overheads & contractors profit complete for finished item of work
(APSS No.701 &707)
(BLD-CSTN-9-23)
Unit = 10 sqm
A.MATERIALS :
Cost of shahabad stone slabs 11.00 sqm 2433.90 10 sqm
Sand for CM(1:5) base coat 0.12 cum 686.69 1 cum
Cement for CM(1:5) base coat 34.56 Kgs 3900.00 1000 Kgs
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs
B.LABOUR
Mason 1st class 0.96 Nos. 475.00 1 Each
Mason 2nd class 2.24 Nos. 440.00 1 Each
Mazdoor(unskilled) 3.10 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 2681.60
Add water charges 1% 0.01 6375.18
Rate for 10 sqm
59 Providing skirting to internal walls to 10.00 cm height with Polished Kadapa stone slabs minimum o
15mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with
cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cemen
paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand
and water etc., complete and overheads & contractors profit complete for finished item of work.(APSS No.701
&707)
(BLD-CSTN-9-22)
Unit = 10 sqm
A.MATERIALS :
Cost of Kdapa stone slabs 10.50 sqm 1609.19 10 sqm
Sand for CM(1:5) base coat 0.12 cum 686.69 1 cum
Cement for CM(1:5) base coat 34.56 Kgs 3900.00 1000 Kgs
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs
B.LABOUR
Mason 1st class 0.96 Nos. 475.00 1 Each
Mason 2nd class 2.24 Nos. 440.00 1 Each
CIVIL DATA 2018-19 : Page-68
60 Providing skirting to internal walls to 10 cm height with non-skid red or white full body ceramic floor tiles
of thickness between 7-8 mm 1st quality of any colour and finish in all shades and designs as approved by
Engineer-in-charge, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened
sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white
cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles
cement, sand and water, overheads & contractors profit complete for finished item of work.(APSS No.701 &707)
(BLD-CSTN-9-18)
Unit = 10 sqm
A.MATERIALS :
Cost of full body ceramic tiles 8 mm thick 10.50 sqm 415.00 1 sqm
Sand for CM(1:5) base coat 0.12 cum 686.69 1 cum
Cement for CM(1:5) base coat 34.56 Kgs 3900.00 1000 Kgs
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs
White cement for jointing & pointing 6.00 Kgs 27.00 1 Kg
B.LABOUR
Mason 1st class 0.77 Nos. 475.00 1 Each
Mazdoor(unskilled) 0.80 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 685.75
Add water charges 1% 0.01 5722.57
Rate per 10 sqm
61 Providing skirting to internal walls to 10 cm height with Soluble salt porcelain vitrified tiles screen
printed and polished of 8 to 10mm thick of any colour and finish in all shades and designs, length equal to
flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like
consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment o
matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and overheads
& contractors profit complete for finished item of work.(APSS No.701 &707)
(BLD-CSTN-9-20)
Unit = 10 sqm
Cost of vitrified tiles 8-10mm thick 10.50 sqm 418.00 1 sqm
Sand for CM(1:5) base coat 0.12 cum 686.69 1 cum
Cement for CM(1:5) base coat 34.56 Kgs 3900.00 1000 Kgs
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs
White cement for jointing & pointing 2.00 Kgs 27.00 1 Kg
CIVIL DATA 2018-19 : Page-70
B.LABOUR
Mason 1st class 0.96 Nos. 475.00 1 Each
Mason 2nd class 2.24 Nos. 440.00 1 Each
Mazdoor(unskilled) 3.30 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 2761.60
Add water charges 1% 0.01 8240.89
Rate for 10 sqm
62 Providing skirting to internal walls to 10 cm height with 8mm thick mirror polished granite tiles length
equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry o
honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with
pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and
overheads & contractors profit complete for finished item of work.(APSS No.701 &707)
(BLD-CSTN-9-21)
Unit = 10 sqm
A.MATERIALS :
Cost of granite tiles 8mm thick 10.50 sqm 1005.00 1 sqm
Sand for CM(1:5) base coat 0.12 cum 686.69 1 cum
Cement for CM(1:5) base coat 34.56 Kgs 3900.00 1000 Kgs
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs
White cement for jointing & pointing 5.00 Kgs 27.00 1 Kg
B.LABOUR
Mason 1st class 0.96 Nos. 475.00 1 Each
Mason 2nd class 2.24 Nos. 440.00 1 Each
Mazdoor(unskilled) 3.30 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 2761.60
Add water charges 1% 0.01 14485.39
Rate for 10 sqm
63 Cladding to internal walls with 8mm thick mirror polished granite tiles length equal to flooring tiles, set ove
base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread a
the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to ful
depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profi
complete for finished item of work.(APSS No.701 &707)
(BLD-CSTN-9-21)
Unit = 10 sqm
A.MATERIALS :
CIVIL DATA 2018-19 : Page-71
64 Providing skirting to internal walls 10cm height with High Polished Granite 16 to 18 mm thick up to 8'-00
(2.43 M) other than black and regular colours, length equal to flooring slabs set over base coat of CM(1:5) 12
mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs pe
sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of al
materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for finished item o
work.
(BLD-CSTN-9-19)
Unit = 10 sqm
A.MATERIALS :
Cost of high polished granite 10.50 sqm 2342.00 1 sqm
Sand for CM(1:5) base coat 0.12 cum 686.69 1 cum
Cement for CM(1:5) base coat 34.56 Kgs 3900.00 1000 Kgs
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs
White cement for jointing & pointing 5.00 Kgs 27.00 1 Kg
Machine cutting charges 66.67 RM 17.00 1 RM
Add for MA @ 25% 0.25 453.36
B.LABOUR
Mason 1st class 2.10 Nos. 475.00 1 Each
Man Mazdoor(Beldar) 4.90 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 2957.50
Add water charges 1% 0.01 30015.49
Rate for 10 sqm
65 Providing cladding to walls with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than
black and regular colours, length equal to flooring slabs set over base coat of CM(1:5) 12 mm thick using
screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing
with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., and overheads & contractors profit complete for finished item of work.
(BLD-CSTN-9-19)
Unit = 10 sqm
A.MATERIALS :
Cost of high polished granite 10.50 sqm 2342.00 1 sqm
Sand for CM(1:5) base coat 0.12 cum 686.69 1 cum
Cement for CM(1:5) base coat 34.56 Kgs 3900.00 1000 Kgs
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs
White cement for jointing & pointing 5.00 Kgs 27.00 1 Kg
Machine cutting charges 66.67 RM 17.00 1 RM
CIVIL DATA 2018-19 : Page-73
66 Providing dadooing to walls with glazed red or white full body ceramic wall tiles of size 200 x 300 mm
245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) o
any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge set over base
coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate
of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth
including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit complete
for finished item of work.
(BLD-CSTN-9-18)
Unit = 10 sqm
A.MATERIALS :
Cost of glazed coloured tiles 10.50 sqm 323.00 1 sqm
Sand for CM(1:5) base coat 0.12 cum 686.69 1 cum
Cement for CM(1:5) base coat 34.56 Kgs 3900.00 1000 Kgs
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs
White cement for jointing & pointing 6.00 Kgs 27.00 1 Kg
B.LABOUR
Mason 1st class 0.77 Nos. 475.00 1 Each
Mazdoor(unskilled) 0.80 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 685.75
Add water charges 1% 0.01 4756.57
Rate for 10 sqm
67 Providing dadooing to walls with sglazed full body porcelain wall tiles of size 300 x 600 mm with any type
of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and
thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colou
and finish in all shades and designs with borders and design as per the approved pattern as approved by
Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey
like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigmen
of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and
overheads & contractors profit complete for finished item of work.
(BLD-CSTN-9-20)
Unit = 10 sqm
A.MATERIALS :
Cost of porcelain wall tiles 10.50 sqm 554.00 1 sqm
Sand for CM(1:5) base coat 0.12 cum 686.69 1 cum
Cement for CM(1:5) base coat 34.56 Kgs 3900.00 1000 Kgs
Cement for slurry 33.00 Kgs 3900.00 1000 Kgs
White cement for jointing & pointing 2.00 Kgs 27.00 1 Kg
CIVIL DATA 2018-19 : Page-75
B.LABOUR
Mason 1st class 0.96 Nos. 475.00 1 Each
Mason 2nd class 2.24 Nos. 440.00 1 Each
Mazdoor(unskilled) 3.30 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 2761.60
Add water charges 1% 0.01 9668.89
Rate for 10 sqm
67 Filling with light weight concrete in Cement Concrete (1:5:10) proportion using brick jelly for low roofs
including cost and conveyance of all materials like cement, sand, brick bats etc., to site including cost of al
labour charges for laying concrete, ramming, curing , overheads & contractors profit etc., complete for finished
item of work. (APSS. No. 402)
(BLD-CSTN-3-7)
Unit: 1 Cum
A. Materials :-
Cement 129.60 Kgs 3900.00 1000 Kgs
Cost of brick jelly 20mm size(1/3rd rate) 460 Nos. 6303.68 1000 Nos.
Fine aggregate ( Sand ) 0.45 Cum 604.69 1 Cum
Water (including curing) 1.20 kl 103.00 1 kl
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8
cum)capacity 1.00 hour 147.70 1 hour
Crew Charges 1.00 hour 241.80 1 hour
Add MA on crew charges 0.25 241.80
C.LABOUR :
1st class mason 0.10 Nos. 475.00 1 Each
Mazdoor (unskilled) 1.39 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 603.50
68 Reinforced cement concrete (1:5:10) proportion (Cement: fine aggregates: coarse aggregate) using 40mm
size (SS5) hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of al
materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site including centering using
Casurina Ballies , Bamboos , Wooden Reapers , Runners , Wood Posts , Wall Plates etc., shuttering, machine
mixing, laying concrete, lifting concrete manually , vibrating, curing, etc., and overheads & contractors profi
complete as per drawings but excluding cost of steel and it's fabrication charges for finished item of work (APSS
NO. 402 & 403) for Dummy columns.
(BLDS-CSTN-3-13)
Unit: 1 Cum
A.MATERIALS :
Cement 129.60 Kgs 3900.00 1000 Kgs
40mm HBG metal 0.90 Cum 962.85 1 Cum
Sand 0.45 Cum 604.69 1 Cum
B.LABOUR :
1st class Mason 0.167 Nos 475.00 1 Each
2nd class Mason 0.167 Nos 440.00 1 Each
Mazdoor (unskilled) 4.70 Nos 400.00 1 Each
Add for MA @ 25% 0.25 2032.81
C.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8
cum)capacity 1.00 hour 147.70 1 hour
Crew charges 1.00 hour 241.80 1 hour
Needle vibrator 40mm ( petrol ) 1.00 hour 29.40 1 hour
Crew charges 1.00 hour 174.10 1 hour
Add MA on crew charges 0.25 415.90
Water(including for curing) 1.20 kl 103.00 1 kl
Basic cost per 1 cum
Rate for other Floors SF TF
Rate as above 5005.70 5005.70
Hire charges of centering and scaffolding 238.00 238.00
Labour , lift charges for scaffolding 1933.00 2108.00
Add for MA @ 25% 483.25 527.00
Lift charges 203.28 406.56
Add for MA @ 25% 50.82 101.64
Rate per 1 cum 7914.05 8386.90
Overheads&Contractors Profit @13.615% 0 0
Rate per 1 cum 7914.05 8386.90
Say 7914 8387
69 Supplying and fixing of stainless steel (grade 304) hand railing as per approved drawing with top rail o
50mm dia pipe and 2mm thick medium class and vertical posts of 25mm dia and 1.6mm thick medium class 1
No for each step fixed with base plate of 75mm dia using bonding agent and anchor fastner and welding,
drilling of 25mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all members of the
railing thouroughly , lacquer finishing to present seamless finish including cost and conveyance of all materials
electrodes, welding charges, cost of all consumables, labour charges , overheads & contractors profit etc.
complete for finished item of work.
Rate per 1 RM
Rate per 1 sqm
Overheads&Contractors Profit @13.615% 0.00000 2833.07
say
CIVIL DATA 2018-19 : Page-78
70 Supplying and fixing of stainless steel (grade 304) railing for ramp as per approved drawing with top rail o
50mm dia pipe and 2mm thick medium class fixed in to wall with 25mm dia pipe of 0.30m length @ 1m centre to
centre and welding, buffing, polishing all members of the railing thouroughly , lacquer finishing to presen
seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of al
consumables, labour charges , overheads & contractors profit etc., complete for finished item of work.
Rate per 10 RM
Overheads&Contractors Profit @13.615% 0.00000 1257.09
say
71 Providing 110 mm Dia ISI marked PVC down water take pipes with socket , 2.5mm thick 4.0 kg/sq.cm pressure
of ISI marked including cost of necessary PVC Bends, shoes, iron / PVC clamps and all other accessories and
fixing in position including cost and conveyance of all materials, operational & incidental charges including al
labour charges for fixing at site etc., and overheads & contractors profit complete for finished item of work
(APSS No. 1328)
72 Supply and fixing jallies ( cement concrete ) of 50mm thick as per the design approved by the Engineer-in
Charge including cost and conveyance of materials to site and labour charges etc., overheads & contractors
profit complete for finished item of work.
73 White washing two coats with white cement to ceiling to give an even shade after thouroughly brushing the
surface to remove all dirt and remains of loose powdered materials including cost of all materials , labou
charges and incidental such as scaffolding , lift charges etc., and overheads & contractors profit complete fo
finished item of work in all floors.
(BLD-CSTN-11-5)
Unit : 10 sqm
A.MATERIALS :
White cement 2.00 kgs 27.00 1 kgs
B.LABOUR :
Painter 1st class 0.063 Nos. 550.00 1 Each
Painter 2nd class 0.147 Nos. 440.00 1 Each
Mazdoor(unskilled) 0.32 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 227.33
Sundries including brushes , ladders etc.,
@ 1% 1% 338.16
Rate per 10 sqm
Overheads&Contractors Profit @13.615% 0.00000 341.54
Rate per 10 sqm
Rate per 1 sqm
Say
74 Providing and applying Wall putty of White Cement or Polymer or Cement based of average 1 to 2 mm
thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface
to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean &
wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and
320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and
all operational, incidental, labour charges, over heads and contractors profit etc., complete for finished item o
work in all floors for Internal walls
75 Providing and applying PMCC / Deco orient base or Equivalent exterior Texture of average 2 to 3 mm
thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface
to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean &
wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the
surface preparation including cost and conveyance of all materials to work site and all operational, incidental
labour charges, scaffolding charges, overheads and contractors profit etc., complete for finished item of work in
all floors for external walls
76 Painting to new walls with 2 coats of Acrylic based Oil bound Washable Distemper having VOC conten
less than 50 grams/litre over promer coat using white cemnt as approved by Engineer-In-Charge, making 3
coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose
powdered materials, including cost and conveyance of all materials to work site and all operational, incidental
labour charges etc., and overheads & contractors profit complete for finished item of work as per APSS 911 fo
internal walls in all floors.
(BLD-CSTN-12-1)
Unit = 10 sqm
Cost of white cement 0.50 Kg 27.00 1 Kg
Painter 1st class 0.08 Nos. 550.00 1 Each
Painter 2nd class 0.19 Nos. 440.00 1 Each
Cost of washable oil bound distemper 1.70 Ltrs 77.00 1 Ltr
Painter 1st class 0.36 Nos. 550.00 1 Each
Painter 2nd class 0.84 Nos. 440.00 1 Each
Add for MA @ 25% 0.25 695.20
Sundries including brushes , ladders etc.,
@ 1% 0.01 1013.40
77 Painting to old walls with 2 coats of Acrylic based Oil bound Washable Distemper having VOC conten
less than 50 grams/litre as approved by Engineer-In-Charge, to give an even shade after thourughly brushing
the old surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of al
materials to work site and all operational, incidental, labour charges etc., and overheads & contractors profi
complete for finished item of work as per APSS 911 for internal walls in all floors.
(BLD-CSTN-11-10)
Unit = 10 sqm
Cost of washable oil bound distemper 1.70 Ltrs 77.00 1 Ltr
Painter 1st class 0.36 Nos. 550.00 1 Each
Painter 2nd class 0.84 Nos. 440.00 1 Each
Add for MA @ 25% 0.25 567.60
Sundries including brushes , ladders etc.,
@ 1% 0.01 840.40
78 Painting to new walls with 2 coats of water proof cement paint of shade as approved by the Engineer-In
Charge over a base coat of aproved white cement base coat making 3 coats in all to give an even shade afte
thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and
conveyance of all materials to work site and all operational, incidental, labour charges etc., and overheads &
contractors profit complete for finished item of work as per SS 912 in all floors
79 Painting to old walls with 2 coats of water proof cement paint of shade as approved by the Engineer-In
Charge to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose
powdered materials, including cost and conveyance of all materials to work site and all operational, incidental
labour charges etc., and overheads & contractors profit complete for finished item of work as per SS 912 in al
floors.
(BLD-CSTN-12-4)
Water proof cement paint 2.00 Kgs 1121.00 25 Kgs
Painter 1st class 0.15 Nos. 550.00 1 Each
Painter 2nd class 0.35 Nos. 440.00 1 Each
Mazdoor(unskilled) 1.50 Nos. 400.00 1 Each
Add for MA @ 25% 0.25 836.50
Sundries including brushes , ladders etc.,
@ 1% 0.01 1135.31
80 Supply & application of one coat water based cement primer of interior grade I and two coats of acrylic
emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for internal walls
including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and
overheads & contractors profit complete for finished item of work in all floors.
81 Supply & application of one coat water based cement primer of exterior grade II and two coats of acrylic
exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterio
walls including cost and conveyance of all materials to site, incidental, operational and all labour charges etc.
and overheads & contractors profit complete for finished item of work in all floors.
82 Painting to new wood work and flush shutters with lappam finish , over a primary coat and painting two
coats of synthetic enamel paint Grade-I VOC (Volatile Organic Compound) content less than 50 grams/litre o
approved shade including cost and conveyance of all materials to site cost of primer coat and all labour charges
etc. complete including applying sand paper on lappam coats for neat finish and overheads & contractors profi
complete in all floors (APSS No.1200, 1207 & 1211).
(BLD-CSTN-12-12-196)
Cost of Synthetic Enamel Paint 1.10 Ltr 225.00 1 Ltr
1st Class Painter 0.36 Nos. 550.00 1 Each
2nd Class Painter 0.84 Nos. 440.00 1 Each
Add for MA @ 25% 0.25 567.60
Sundries including brushes , ladders etc.,
@ 1% 0.01 957.00
84 Painting primer coat on new wood work using red oxide Iron primer paint grade - 1 of approved brand
including cost and conveyance of all materials to site , all labour charges etc., and overheads & contractors profi
complete in all floors.(APSS No. 1201, 1212 & 1207).
(BLD-CSTN-12-7)
Unit : 10 sqm
A.MATERIALS :
Red oxide primer 0.70 Ltr 121.00 1 Ltr
B.LABOUR :
1st Class Painter 0.21 Nos. 550.00 1 Each
2nd Class Painter 0.49 Nos. 440.00 1 Each
Add for MA @ 25% 0.25 331.10
Sundries including brushes , ladders etc.,
@ 1% 0.01 498.58
85 Painting two coats with synthetic enamel paint Grade-I VOC (Volatile Organic Compound) content less
than 50 grams/litre to new iron work including cost and conveyance of all materials to site, incidental
operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in
all floors. (SS No. 1201, 1212 & 1207).
(BLD-CSTN-12-12-197)
Unit : 10 sqm
A.MATERIALS :
Cost of Synthetic Enamel Paint 1.10 Ltr 225.00 1 Ltr
B.LABOUR :
1st Class Painter 0.33 Nos. 550.00 1 Each
2nd Class Painter 0.77 Nos. 440.00 1 Each
Add for MA @ 25% 0.25 520.30
Sundries including brushes , ladders etc.,
@ 1% 0.01 897.88
86 Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less
than 50 grams/litre over primer coat of red oxide to new iron work including cost and conveyance of a
materials to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete
for finished item of work in all floors. (SS No. 1201, 1212 & 1207).
87 Painting two coats with synthetic enamel paint Gr-I having VOC (Volatile Organic Compound) content less
than 50 grams/litre to old iron work including cost and conveyance of all materials to site, incidental, operationa
and all labour charges and overheads & contractors profit etc., complete for finished item of work in all floors
(SS No. 1201, 1212 & 1207).
(BLD-CSTN-12-12-198)
Unit : 10 sqm
A.MATERIALS :
Cost of Synthetic Enamel Paint 0.90 Ltr 225.00 1 Ltr
B.LABOUR :
1st Class Painter 0.33 Nos. 550.00 1 Each
2nd Class Painter 0.77 Nos. 440.00 1 Each
Add for MA @ 25% 0.25 520.30
Sundries including brushes , ladders etc.,
@ 1% 0.01 852.88
88 Polishing two coats to teak wood doors using French spirit polish of approved brand for new wood work to
teak wood frame and shutters including sand papering to smooth surfaces etc. including cost and conveyance o
all materials to site, all labour charges etc., complete for finished item of work in all floors.
(BLD-CSTN-12-15)
A.Materials
French polish 0.228 Ltrs 170.00 1 Ltrs
cost of spirit 1.63 Ltrs 91.00 1 Ltrs
B.Labour
1st Class Painter 0.96 Nos. 550.00 1 Nos.
2nd Class Painter 2.24 Nos. 440.00 1 Nos.
Add for MA @ 25% 0.25 1513.60
Sundries for terpentaine, sand paper, putty,
wood filler, white woolen cloth, linseed oil,
cotton etc., @ 1% 0.01 2079.09
89 Supply & applying Melamine Polish Glossy/ Matt finish to the wood works duly cleaning the surface and
applying emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper, clean &
wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3
hrs, sand with 180 and 320 No., emery paper, apply two component wood sealer, air dry for 24 hrs, Sand with
320 No emery paper, applying one coat of approved spraying thinner (for spraying)/ applying one coat o
approved brushing thinner or general purpose thinner (for brushing) and apply (either with spray or brush) two
coats of approved brand melamine including cost & labour charges, emery papers, cost of thinner & melamine
polish, over heads and contractors profit etc., complete for finished item of work
90 Supply & applying Poly-Urethane Water Proof Polish Glossy/ Matt finish to the wood works duly cleaning
the surface and applying emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery
paper, clean & wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, ai
dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper, applying two component wood sealer, after the
surface preparation applying one coat of approved spraying PU thinner (for spraying) / applying one coat o
approved brushing PU thinner or general purpose thinner (for brushing) and apply one coat of PU by brush o
spray, air-dry overnight, Sand again with 180 No. emery paper and removing dust, applying second coat of PU
air drying for 4 - 6 Hrs, Sand with 320 No emery paper, and applying (either with spray or brush) two coats o
approved brand PU including cost & labour charges, emery papers, cost of thinner & Poly-Urethane Water Proo
Polish, over heads and contracors profit etc., complete for finished item of work
91 Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked togethe
through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe
shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking
plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and
springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc.
overheads & contractors profit complete for finished item of work as per special spn: 1108
CIVIL DATA 2018-19 : Page-87
92 Supplying & fixing collapsible steel shutters with vertical, double channel of 20 x10x2 mm of 100 mm centre
Bracers with flat iron 40x40x6 mm with 38 mm dia steel pulleys, the top, bottom and side vertical frames of the
collapsible gate with 65x65mmx8mm MS Angle and middle guide rail at site height with 65mmx8mm MS flat fo
the pulleys to guide and fixed with necessary hold fasts, bolts, nuts, rivets, locking arrangements, stoppers
handles, all accessories all fixtures and painted with one coat of approved steel primer etc., overheads &
contractors profit complete for finished item of work as per special spn 1105
93 Providing specialized polysulphide sealant treatment to the expansion joints (Size : 25mm x 12mm) duly
a). Chipping and removing of existing covering on expansion joints b). Cleaning of the surface from dirt, dust and
other contaminations c).Application of one coat of - High performance specially designed SBR latex polyme
based bonding agent d). Providing and application of Acrylic Polymer modified reinstatement concrete /mortar to
the damaged edges of joint and making the groove. e]. Providing and fixing of masking tape on top of the join
both sides f). Providing and fixing of Back up support material of Backer rod to leave the depth of 12mm on the
joint g). Providing and application of one coat of polysulphide primer on inner edges of Joint. h). Providing and
application of Two part Polysulphide sealant to a width of 25mm and 12mm depth with putty knife and neat finish
i). Removing of masking tape and providing and application of two coats of Acrylic elastomeric cementitious
coating including cost and conveyance of all materials, labour charges, overheads & contractors profit etc.
complete for finished item of work
94 Providing and fixing of Expansion joint filler board for buildings, columns, beams and slabs 25 mm thick
including cost and conveyance of all materials to site, all incidental, operational, labour charges etc.overheads &
contractors profit complete for finished item of work as per approved drawing for all floors
Say
CIVIL DATA 2018-19 : Page-89
96 Supplying and fixing aluminium composite cladding 4mm thick of approved make with skin material 0.25
mm thick aluminium sheet cover material natural polyethylene aluminium cladding panel fixed with extruded
aluminium basis frame (50x25x1.5mm) angle cleats, weather sealants, rivets, GI brackets all as approved, using
suitable bolts on structural steel work including necessary accessories complete in all respects including al
scaffolding and labour charges , overheads & contractors profit complete for finished item of work but excluding
cost of structural steel fabrication if any.
97 Supplying and fixing aluminium composite cladding 4mm thick of approved make with skin material 0.50
mm thick aluminium sheet cover material natural polyethylene aluminium cladding panel fixed with extruded
aluminium basis frame (50x25x1.5mm) angle cleats, weather sealants, rivets, GI brackets all as approved, using
suitable bolts on structural steel work including necessary accessories complete in all respects including al
scaffolding and labour charges , overheads & contractors profit etc., complete for finished item of work bu
excluding cost of structural steel fabrication if any.
98 Providing and Fixing Structural Glazing fabricated from Roll formed sections made of Pre-painted Steel
Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 Gm/sqm) with
total coated thickness of 0.72mm. The glass holding section made of 304 grade stainless steel of 0.6mm thick as
per the design requirement & calculations as given in IS: 875. Primer coat with epoxy primer of 5 – 7 microns
thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7
microns or powder coated with pure polyester powder up to 50-60 microns thick. The vertical section should be
of 50mm x100mm x 0.72mm, 33mm x 58mm x 0.72mm for frame horizontal section, stiffener section should be
48mm x 98mm x 1mm, cover profiles sections should be of 20mm x 58mm x 0.58mm, Glass holding section
should be of 37mm x 37mm & 37mm x 18mm. Including 5mm thick Ocean Blue reflective glass. Brackets made
of CRCA powder coated/Electroplated should be used to connect vertical to horizontal, vertical to slab, to fix
verticals at top & bottom as per site requirement.
Gasket made of Ethyl Propylene Diamine Monomer. Natural cure, with Good U.V. Resistance Silicon to be used
Wall fixing of sections to concrete/masonry wall should be with self-expanding cap & screws. The rate is inclusive
of cost and conveyance of all materials to site, all labour charges, incidental charges, cost of all consumables
etc. and scaffolding charges, form work , overheads & contractors profit etc., complete for finished item of work in
all floors.
99 Providing and Fixing Top Hung shutters in Structural Glazing fabricated from Roll formed sections made
of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with
Zinc of 120 Gm/sqm) with total coated thickness of 0.72mm. The glass holding section made of 304 grade
stainless steel of 0.6mm thick. Galvanized steel sections are to be used as stiffeners inside the colour coated
steel/powder coated sections as per the design requirement. Design calculations are made to suit wind
pressures as given in IS 875. Primer coat with epoxy primer of 5-7 microns thick and back coated with Alkyd
backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The outer frame
should be of 20mm x 58mm x 0.6mm, Shutter section should be of 58mm x 33mm x 0.72 mm, stiffener section
should be 56mm x 31mm x 1mm. EARL Bihari Hinges – 2 Nos for each shutter and Aluminium Stays – 2 Nos
for each shutter, Aluminium Handle – 1 no. for each shutter. The rate is inclusive of cost and conveyance of al
materials to site, all labour charges,
CIVIL DATA 2018-19 : Page-90
incidental charges, cost of all consumables etc. and scaffolding charges, form work, overheads & contracto
profit etc. complete for finished item of work in all floors.
Rate as per SSR 1.00 sqm 5355.00 1 sqm
Overheads&Contractors Profit @13.615% 0.00000 5355.00
Rate per 1 sqm
Say
100 Supply and fixing of curtain Glazing made of pre painted steel (base steel as per IS 513 of 0.6 mm thick D
quality, galvanized as per IS 277 with Zinc of 120 GSM) Primer coated with epoxy primer of 5-7 microns thick
finish painted with a polyester paint of 12- 16 microns thick and back coated with 5-7 microns thick alkyd backer
Section for outer frame should be 46 x 52 mm, section for mullion should be 46 x 70 mm and section for beading
should be 18 x 25 mm. The Glazing should be paneled with 5 mm thick plain float Glass with Ethyl Propylene
diameine Monomer (EPDM) Gaskets. The sections are to be cut to length, mitre joined with corner bracket
Centre mullions are to be fixed suing mullion cap. Handle made of high grade Aluminium powder coated and
nylon receiver. Gaskets made of Ethyl propylene Diamine Monomer (EPDM) Corner brackets made of CRCA
with zinc phosphating. Mullion caps made of Glass filled nylon. The above frames should be fixed to the concrete
/ masonry wall be means of self expanding screws,overheads & contractor profit etc., complete for finished item
in all floors.
a) Fixed Glazing 2'-0" x 2'-0" (609.6x609.6mm) and 2'-0" x 3'-0" (609.6x914.4mm) grid outer frames section
size of 46 x 52 mm
Rate as per SSR 1.00 sqm 5466.00 1 sqm
Overheads&Contractors Profit @13.615% 0.00000 5466.00
Rate per 1 sqm
Say
b) Fixed Glazing 3'-0" x 3'-0" (914.4x914.4mm), 3'-0" x 4'-0" (914.4x1219.2mm) grid outer frames section
size of 46 x 52 mm
Rate as per SSR 1.00 sqm 4295.00 1 sqm
Overheads&Contractors Profit @13.615% 0.00 4295.00
Rate per 1 sqm
Say
101 Providing and fixing in true horizontal level 13 mm - Mineral Fiber Ceiling tile of 595 x 595 (Square edge
Fissura fine model) using hot dipped Galvanized Steel section exposed surface with pre-coated capping, main
Tee of size 24 x 32 mm at every 1200 mm c/c maximum and rotary stitched cross tee of size 24 x 27 mm a
every 600 mm c/c and sub-cross tee of size 24 mm x 25 mm at 1200 mm c/c and wall angle of size 19 x 19 mm
fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0
mm thick pre-straightened GI Wire including cost and conveyance of all materials and labour charges such as
cutting , fixing of standing of frame work exposing roof making, overheads & contractor profit etc., complete fo
finished item of work in all floor in all floors.
C) Machinery
Power Saw cutter - Hand Operated - Hire
Charges 0.32 Hours 102.00 1 No.
Power Drill - Hand Operated - Hire Charges 0.32 Hours 95.00 1 No.
102 Providing and fixing in true horizontal level 15 mm - Mineral Fiber Ceiling tile of 595 x 595 (Square edge
Fissura fine model) using hot dipped Galvanized Steel section exposed surface with pre-coated capping, main
Tee of size 24 x 32 mm at every 1200 mm c/c maximum and rotary stitched cross tee of size 24 x 27 mm a
every 600 mm c/c and sub-cross tee of size 24 mm x 25 mm at 1200 mm c/c and wall angle of size 19 x 19 mm
fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0
mm thick pre-straightened GI Wire including cost and conveyance of all materials and labour charges such as
cutting , fixing of standing of frame work exposing roof making, overheads & contractor profit etc., complete fo
finished item of work in all floor in all floors.
103 Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1) using 12.5
mm thick Gyp Board conforming to IS 2095 - 1993 fixing to Gyp steel GI perimeter channels of size 20 mm x 27
mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm
c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffi
at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners
& connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in
direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge
Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and pape
tape to have a flush look including filling the tapered & square edges with jointing compound, two coats o
drywall topcoat including overheads and contractor profit etc., complete for finished item of work
Say
CIVIL DATA 2018-19 : Page-94
104 Supplying and fixing Gyp board Fine line Grid false ceiling (GS-FLC-4.6)using 12.5mm thick Gyp Board
sheet tiles of size 595mm x 595mm conforming to IS 2095 - 1992 fixing to Gyp steel precoated GI wall angle o
size 25mm x 25mm x 0.70mm thick along the perimeter of ceiling screw fixed to brick work / partition at 610mm
center to center and suspending the frame work using precoated GI Tee section (24mm x 38mm x 0.7mm) from
soffit at 1220mm center to center fixed with GI Soffit Cleat, rawl plugs and steel expansion fasteners &
connecting clip to the GI Tee section with 4mm dia GI rod with galvanised spring steel level clip of PVC unversa
holding clips system at 1200mm center to center and fixing the 12.5mm Gypboard sheet tiles of size 595mm x
595mm and finishing two coats of drywall top coat, overheads and contractor profit complete for finished item o
work in all floors.
105 Providing and fixing Thermocole False ceiling in true horizontal level 600mm x 600mm using 12mm thick
Thermocole sheet, anodized Aluminium Tee sections of size 24.50mm x 24.0mm x 2.4mm in grid with cross tee
of size 24mm x 24.5mm at every 600mm center to center and anodised aluminium wall angle of size 24mm x
24mm fixed to periphery of the wall and the above grid is suspended at every 1200mm center to center in both
directions using 2.0mm thick GI wire for finished of size 600mm x 600mm including cost and conveyance of al
materials and labour charges such as cutting , fixing of standing of frame work exposing roof complete fo
finished item of work in all floors. (The rate is inclusive of overheads & contractor profit).
106 Supplying and fixing 50mm dia nominal bore Medium Grade properties & weight as per IS 1239 ISI mark MS
Tube for fixing of GI Sheet including cost and conveyance of all materials to work site and all operational
incidental, labour charges etc., complete for finished item of work in all floors for stair case head room roof.
Say
CIVIL DATA 2018-19 : Page-96
107 Roofing with corrugated G.I sheets 0.80mm thick fixed with G.I ‘J’ bolts & nuts 8 mm dia with bitumen & G.
limpet washers filled with white lead & including a coat of approved steel primer and two coats of approved pain
on over lapping of sheets complete (up to a pitch of 600) etc., complete, excluding the cost of purlins, rafters
trusses including cost and conveyance of all materials , labour charges , overheads and contractors profit etc.
complete for finished item of work in all floors.
Unit : 10 sqm
A. MATERIALS:
G.I corrugated 0.80 mm thick sheets 103.09 Kgs 59.00 1 Kg
G.I scam bolts & nuts 2 x 27 (laps) x 17 = 47.91 Nos. 5.00 1 No.
884
G.I ‘J’ bolts 8 mm dia 2 x 5 x 27 sheets x 3 43.90 Nos. 9.00 1 No.
nos = 810
Limpet nos. (for
washers withscam
washers or srews,
& ‘J’ bolts) if
884 + 91.82 Nos. 2.00 1 No.
wooden
810
Bitumen battens
= 1694
washers used. 91.82 Nos. 2.00 1 No.
Zinc cromate yellow paint 0.14 Ltrs 166.00 1 Ltr
Ready mixed paint 0.20 Ltrs 225.00 1 Ltr
B. LABOUR
For roofing
Carpenter II class 0.84 Nos. 440.00 1 No.
Man mazdoor (beldar) 0.91 Nos. 400.00 1 No.
For primer painting one coat
Painter 1st class 0.018 Nos. 550.00 1 No.
Painter 1st class 0.042 Nos. 440.00 1 No.
Mazdoor (coolie) 0.06 Nos. 400.00 1 No.
For two coats of painting to over laps
Painter 1st class 0.042 Nos. 550.00 1 No.
Painter 1st class 0.098 Nos. 440.00 1 No.
Mazdor (coolie) 0.14 Nos. 400.00 1 No.
Add for MA @ 25% 0.25 908.20
Rate per 10 sqm
Rate per 1 sqm
Overheads&Contractors Profit @13.615% 0.00000 828.77
Rate per 1 sqm
Say
108 Supplying and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm
thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified
Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020
Length: Maximum 12 Meters with Regular Range Colours fixed with G.I ‘J’ bolts & nuts 8 mm dia with bitumen &
G.I limpet washers filled with white lead & including a coat of approved steel primer and two coats of approved
paint on over lapping of sheets complete (up to a pitch of 600) etc., complete, excluding the cost of purlins
rafters, trusses including cost and conveyance of all materials , labour charges , overheads and contractors profi
etc., complete for finished item of work in all floors.
Unit : 10 sqm
A. MATERIALS:
Galvalume sheet 0.50mm thick 10.50 sqm 386.00 1 sqm
G.I scam bolts & nuts 2 x 27 (laps) x 17 =
884 47.91 Nos. 5.00 1 No.
G.I ‘J’ bolts 8 mm dia 2 x 5 x 27 sheets x 3
nos = 810 nos. with washers or srews, if
wooden battens used.
43.90 Nos. 9.00 1 No.
Limpet washers (for scam & ‘J’ bolts) 91.82 Nos. 2.00 1 No.
Bitumen washers 91.82 Nos. 2.00 1 No.
B. LABOUR
For roofing
Carpenter II class 0.84 Nos. 440.00 1 No.
Man mazdoor (beldar) 0.91 Nos. 400.00 1 No.
Add for MA @ 25% 0.25 733.60
CIVIL DATA 2018-19 : Page-97
ROAD WORKS
109 Construction of Granular sub-base by providing HBG material confirming to Grading - III of MORT & H
RBR-SBBS-12 Table 400-2 including cost and conveyance of all material to woek site and spreading in uniform layers with
motor grader or by approved means, on prepared surface mixing by mix place method with Rotavator/ approved
means, at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished
item of work as per MoRT& H specification 401 (4th revision) and as directed by the Engineer- in - charge
(Payment will be made based on levels for finished item of work)
Unit : 1 cum
Taking output : 300 cum
a) Labour
Mate day 1 day
Mazdoor skilled 2.40 day 400.00 1.00 day
Mazdoor unskilled 8.00 day 400.00 1.00 day
Add for MA @ 25% 0.25 4160.00
b) Machinery
Vibratory roller 8T 6.00 hr 2736.20 1 hr
Water tanker 6 KL 5.00 hr 655.20 1 hr
Tractor with grader @ 25cum per hour 12.00 hr 423.60 1 hr
Tractor with Rotavator 12.00 hr 423.60 1 hr
c) Material
Coarse graded Granular sub base material
as per Table 400-2 of MORT &H 9.5mm
to4.75mm @ 66% (Av rate of 9.5-
11.2mm , 5-7mm & 2.36-5mm)
Coarse graded Granular sub-base Material
9.5 mm to 4.75 MM @ 66% 237.60 cum 692.85 1 cum
Coarse graded Granular sub-base Material
2.36 mm @ 34
& below 122.40 cum 857.85 1 cum
fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates
including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using
needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and
expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge
/ culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound
(where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501
MORD.
Unit = cum
Taking output = 75 cum (172.50 t)
(100 x 3.75 x 0.200)
a) Labour
Mate day -
Mason 1st Class 5.00 day 475.00 1 day
Mason (2nd class) 5.00 day 440.00 1 day
Mazdoor (Unskilled) 150.00 day 400.00 1 day
Mazdoor (Skilled) 6.00 day 400.00 1 day
Mazdoor ( semi skilled) 6.00 day 400.00 1 day
Blacksmith for cutting of dowel bars
including removal of burrs, fabrications &
fixing of dowel bars. 1.00 day 475.00 1 day
Add for MA @ 25% 0.25 69850.00
b) Machinery
Concrete mixer 0.28 / 0.4 cum capacity (6
mixers) with weigh batcher and suitable
capacity calibrated water tank 36.00 hour 147.70 1 hour
crew charges 36.00 hour 241.80 1 hour
Add for M25% on crew charges 0.25 8704.80
Needle vibrator hire charges 9.00 hour 29.40 1 hour
crew charges 9.00 hour 174.10 1 hour
Add for M25% on crew charges 0.25 1566.90
Screed vibrator 9.00 hour 50.00 1 hour
Plate vibrator 9.00 hour 48.00 1 hour
Concrete joint cutting machine for initial &
final cuts 4.00 hour 100.00 1 hour
Water tanker 6 kl capacity) 5.00 hour 655.20 1 hour
Air Compressor 2 hour 462.20 1 hour
CIVIL DATA 2018-19 : Page-100
c) Material
Crushed stone coarse aggregates, grading
will be as per Clause 1501.2.4.1 (Table
1500.1) of specifications @ 0.90 cum/cum
of concrete (25 mm & 12.5 mm blending)
67.50 cum 1200.66 1 cum
Sand as per IS:383 and conforming to
Clause 1500.2.4.2 @ 0.45 cum/cum of
concrete 33.75 cum 604.69 1 cum
Cement 26.25 MT 3900.00 1 MT
Polythene sheet 125 micron 412.50 sqm 18.00 1 sqm
Mild steel dowel bar 25 mm dia of grade S
240. 500 mm long 20 Nos. at culvert/bridge
slab and at construction joint including 5
per cent wastage.
(4 x 20 x 0.500) + 5 per cent wastage = 42
m @ 2.80 kg per m = 117.6 kg. 0.12 MT 43000.00 1 MT
Bituminous sealant 800 ml per joint for 23
joints ( BMT-H.93)(SoR 2014-15) 19.00 litre 96.00 1 litre
Jute rope 12 mm dia including 5 per cent
wastage 90.00 RM 5.00 1 RM
Polythene sheathing, covering 2/3rd dowel
bars (20x23) and tight fit including 5 per
cent wastage 483.00 Nos. 0.60 1 No.
Plasticizer 0.5 per cent by weight of
cement(BMT-H.63)(SoR 2014 - 15) 122.00 litre 107.00 1 litre
Water for curing 18.00 kl 103.00 1 kl
Joint filler board 20 mm thick as per
IS:1838 BMT-U.02 3.00 sqm 902.00 1 sqm
Total
d) Formwork @ 3% of (a+b+c) 0.03 347703.43
D A T A ( SoR 2018-19)
CM (1:8)
721.02
702.00
80.00
20.00
1523.02
CIVIL DATA 2018-19 : Page-102
DATA
Amount
(Rs.)
fully stacking useful materials for re-use and disposal of unserviceable
d by Executive Engineer duly taking actual premeasurements before
s , overheads & contractor profit etc., complete
163.60
40.90
204.50
0.00
204.50
205
976.00
244.00
1220.00
0.00
1220.00
1220
1952.00
488.00
2440.00
0.00
2440.00
2440
1728.00
432.00
2160.00
0.00
2160.00
2160
60.00
15.00
75.00
7.50
0.00
7.50
8
361.00
90.25
451.25
0.00
451.25
CIVIL DATA 2018-19 : Page-103
451
CIVIL DATA 2018-19 : Page-104
110.00
27.50
137.50
13.75
0.00
13.75
14
130.00
32.50
162.50
16.25
0.00
16.25
16
188.00
47.00
235.00
0.00
235.00
235
40.00
10.00
50.00
5.00
0.00
5.00
5
50.00
12.50
62.50
6.25
0.00
6.25
6
40.00
10.00
50.00
5.00
0.00
5.00
5
50.00
12.50
62.50
6.25
CIVIL DATA 2018-19 : Page-105
0.00
6.25
6
CIVIL DATA 2018-19 : Page-106
44.00
80.00
22.00
36.50
182.50
0.00
182.50
183
57.20
108.00
30.80
49.00
245.00
0.00
245.00
245
1546.80
0.00
1546.80
1547
1456.00
364.00
1820.00
0.00
1820.00
182.00
182
CIVIL DATA 2018-19 : Page-107
3328.00
832.00
15205.20
1544.40
386.10
21295.70
0.00
21295.70
88.73
89
3328.00
832.00
15205.20
1544.40
386.10
21295.70
0.00
21295.70
101.41
101
2080.00
520.00
CIVIL DATA 2018-19 : Page-108
2600.00
0.00
2600.00
260.00
260
2496.00
624.00
15205.20
1544.40
386.10
20255.70
0.00
20255.70
112.53
113
245.00
137.50
3340.00
930.63
1133.70
32.20
232.10
725.40
239.38
199.50
126.00
7341.40
0.00
7341.40
CIVIL DATA 2018-19 : Page-109
734.14
734
CIVIL DATA 2018-19 : Page-110
2080.00
520.00
6802.20
193.20
1392.60
4352.40
1436.25
16776.65
0.00
16776.65
1677.67
1678
86.40
86
150.00
0.00
150.00
150
CIVIL DATA 2018-19 : Page-111
enches, sides of foundations and basement with initial lead in layers not
amming including cost and conveyance of water to work site and all
re charges of T&P etc., and overheads & contractors profit complete for
0)
124.00
31.00
181.86
10.30
347.16
0.00
347.16
347
sides of foundations and basement with initial lead in layers not exceeding
including cost and conveyance of water to work site and all
re charges of T&P etc., and overheads & contractors profit complete for
0)
124.00
31.00
191.86
12.36
359.22
0.00
359.22
359
1248.00
312.00
1560.00
123.60
1683.60
0.00
1683.60
168.36
168
CIVIL DATA 2018-19 : Page-112
1248.00
312.00
1560.00
123.60
1683.60
0.00
1683.60
168.36
168
631.80
866.57
272.11
123.60
147.70
241.80
60.45
47.50
556.00
150.88
3098.40
0.00
3098.40
3098
505.44
CIVIL DATA 2018-19 : Page-113
866.57
272.11
123.60
CIVIL DATA 2018-19 : Page-114
147.70
241.80
60.45
47.50
556.00
150.88
2972.04
0.00
2972.04
2972
CM (1:8) prop: (Cement: Sand) using hard other than granite stones
cost and conveyance of all materials like cement, screened sand, water,
ite, including labour for cutting stones to required size and shape, mixing,
g etc.,and overheads & contractors profit complete for finished item of
PSS No. 601 & 615)
231.66
455.72
226.61
570.00
800.00
342.50
2626.49
26.26
2652.75
0.00
2652.75
2653
CM (1:8) prop: (Cement: Sand) using hard granite stones carted from
nveyance of all materials like cement, screened sand, water, stones etc.,
labour for cutting stones to required size and shape, mixing, of cement,
overheads & contractors profit complete for finished item of work in
. 601 & 615)
231.66
631.82
226.61
570.00
800.00
342.50
2802.59
28.03
2830.61
0.00
CIVIL DATA 2018-19 : Page-115
2830.61
2831
3:6) nominal mix using 40mm size machine crushed hard granite metal
ard granite metal (coarse aggregate) in (2:1) ratio from approved quarry
0.8 cum) capacity including cost and conveyance of all materials like
aggregate, water etc. to site, all charges for mixing and hire charges of
ition, vibrating, curing, centering charges, overheads & contractors profit
gs and basement .
577.71
389.48
272.11
858.00
123.60
147.70
241.80
60.45
29.40
174.10
43.53
47.50
556.00
150.88
64.00
325.00
81.25
4142.50
0.00
4142.50
4142
1482.00
1038.61
241.88
63.18
117.48
1840.00
505.16
CIVIL DATA 2018-19 : Page-116
294.33
494.01
39.19
232.08
181.52
123.60
6653.03
6653.03
288.00
631.00
157.75
7729.78
0.00
7729.78
7730
6653.03
328.00
1004.00
251.00
8236.03
0.00
8236.03
8236
6653.03
695.00
760.50
190.13
8298.65
0.00
8298.65
8299
6653.03
64.00
325.00
81.25
7123.28
0.00
7123.28
7123
1482.00
1038.61
241.88
79.33
73.48
2240.00
598.20
CIVIL DATA 2018-19 : Page-118
294.33
494.01
39.19
232.08
181.52
123.60
7118.21
1067.73
1423.64
CIVIL DATA 2018-19 : Page-119
1482.00
1038.61
241.88
31.83
58.52
1230.80
330.29
68.01
114.14
9.06
53.62
41.94
123.60
4824.29
554.79
CIVIL DATA 2018-19 : Page-120
CIVIL DATA 2018-19 : Page-121
603.04
723.64
844.25
964.86
CIVIL DATA 2018-19 : Page-122
1482.00
1038.61
241.88
31.83
58.52
1230.80
330.29
68.01
114.14
28.54
123.60
4748.20
178.06
140.40
3227.48
137.34
114.00
246.40
756.00
279.10
49.01
4949.73
4949.73
0.00
4949.73
4950
3561.58
308.88
151.07
285.00
264.00
1100.00
412.25
60.83
6143.61
614.36
CIVIL DATA 2018-19 : Page-124
CIVIL DATA 2018-19 : Page-125
ent : Sand) in superstructure with fly ash cement / lime solid blocks of
m approved source having minimum crushing strength of 50 Kg/Sqcm.
materials like cement, sand, bricks, water etc., to site, labour charges, like
rges, constructing masonry, lift charges, curing, overheads and contrctor
work. (APSS No. 501 & 504).
2726.03
93.60
68.67
114.00
246.40
756.00
279.10
42.84
4326.63
4326.63
0.00
4326.63
4327
walls (100 mm thick) in CM (1:4) prop. (Cement : Sand) using fly ash
90mm x 100mm x 140mm having minimum compressive strength of 50
M.S plain rods in every third layer with free ends of the reinforcement
walls where applicable including cost and conveyance of all materials like
., to site, all operational, incidental charges such as labour charges for
arges, constructing masonry, lift charges, curing, etc., and overheads &
of steel and its fabrication charges complete for finished item of work.
2665.63
140.40
68.67
285.00
264.00
1100.00
CIVIL DATA 2018-19 : Page-126
412.25
49.36
4985.31
498.53
CIVIL DATA 2018-19 : Page-127
inal mix using 20mm size graded machine crushed hard granite metal
970 and IS 2386 Part 1 to Part 8) from approved quarry using concrete
acity including cost and conveyance of all materials like cement, fine
ater etc. to site including all charges for machine mixing, hire charges of
ion, curing etc., & lift charges , and overheads & contractors profit for bed
f work. (APSS No. 402)
1168.43
272.11
858.00
123.60
147.70
241.80
60.45
47.50
556.00
150.88
3626.47
20mm size graded machine crushed hard granite metal (coarse aggregate
rt 1 to Part 8) from approved quarry using concrete Mixer 10 / 7 cft (0.2 /
conveyance of all materials like cement, fine aggregate(sand), coarse
all charges for machine mixing, hire charges of concrete mixer, laying
charges , and overheads & contractors profit for septic tank bed, in
. (APSS No. 402)
CIVIL DATA 2018-19 : Page-128
1168.43
272.11
1287.00
123.60
147.70
241.80
60.45
47.50
556.00
150.88
4055.47
0.00
4055.47
4055
nal mix using 20mm size graded machine crushed hard granite metal
970 and IS 2386 Part 1 to Part 8) from approved quarry using concrete
acity including cost and conveyance of all materials like cement, fine
ater etc. to site including all charges centering, labour charges such as
charges of concrete mixer, laying concrete in position, curing etc., & lift
profit for steps for finished item of work. (APSS No. 402)
1168.43
272.11
1287.00
123.60
147.70
241.80
60.45
29.40
174.10
43.53
47.50
556.00
150.88
4302.49
CIVIL DATA 2018-19 : Page-129
CIVIL DATA 2018-19 : Page-130
nominal mix using 12mm size hard granite machine crushed graded
83 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a
nt per 1 cum of concrete using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
e of all materials like cement, fine aggregate (Sand), coarse aggregate,
shuttering, labour charges such as weigh batching, machine mixing, hire
ete, lift charges, curing etc., and overheads & contractors profit complete
2 & 403) for sill slabs.
1287.00
992.75
272.11
63.18
117.48
1440.00
405.16
147.70
241.80
60.45
123.60
5151.22
nominal mix using 12mm size hard granite machine crushed graded
83 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a
nt per 1 cum of concrete using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum)
e of all materials like cement, fine aggregate (Sand), coarse aggregate,
shuttering, labour charges such as weigh batching, machine mixing, hire
ete, lift charges, curing etc., and overheads & contractors profit complete
2 & 403) for platforms and shelves.
1287.00
992.75
272.11
31.83
58.52
1000.00
272.59
147.70
CIVIL DATA 2018-19 : Page-131
241.80
60.45
123.60
4488.34
CIVIL DATA 2018-19 : Page-132
224.42
224.42
112.21
112.21
45150.00
318.00
1800.00
3325.00
4000.00
2281.25
56874.25
CIVIL DATA 2018-19 : Page-133
CIVIL DATA 2018-19 : Page-134
45150.00
318.00
1800.00
3325.00
4000.00
2281.25
56874.25
m thick single coat in CM (1:5) using screened sand including cost and
ent, sand, water etc., to site and all operational, incidental charges on
ur charges for mixing mortar, finishing, curing as directed by Engineer-in-
ors profit complete for finished item of work.(SS 901,903 & 904)
168.48
103.00
213.75
462.00
1120.00
448.94
25.16
2541.33
254.13
CIVIL DATA 2018-19 : Page-135
using screened sand with base coat of 8mm thick in CM (1:6) and top coat
a sponge finishing including cost and conveyance of all materials like
all operational, incidental charges on materials and including cost of all
hing, scaffolding, lift charges, curing, including cutting grooves as directed
overheads & contractors profit complete for finished item of work. (SS
102.96
75.54
56.16
27.47
299.25
646.80
1560.00
626.51
33.95
3428.63
342.86
168.48
103.00
213.75
462.00
1120.00
448.94
CIVIL DATA 2018-19 : Page-136
25.16
2541.33
254.13
254.13
0.00
254.13
254
CIVIL DATA 2018-19 : Page-137
using screened sand with base coat of 16mm thick in CM(1:6) and top
bara sponge finishing including cost and conveyance of all materials like
all operational, incidental charges on materials and including cost of all
hing, scaffolding, lift charges, curing, including cutting grooves as directed
ads & contractors profit complete for finished item of work .(SS 901,903 &
168.48
123.60
56.16
27.47
299.25
646.80
1560.00
626.51
35.08
3543.36
354.34
235.87
144.20
CIVIL DATA 2018-19 : Page-139
213.75
462.00
1120.00
448.94
26.25
2651.01
265.10
265.10
0.00
265.10
265
ed RCC roof slab surfaces to required slopes with CM (1:3) prop. using
mixed with integral cement water proofing liquid confirming to IS: 2645-
facturers as approved by Engineer-in-charge at 200ml per one bag of
reen, finished smooth with a floating coat of neat cement and thread lining
cluding cost and conveyance of all materials like cement, sand, water
, operational, incidental, and labour charges for mixing mortar, laying, lift
lining, curing including rounding off junctions of wall and slab etc., and
e for finished item of work. (APSS No. 901 & 903).
393.12
144.20
34.40
313.50
677.60
1480.00
617.78
36.61
3697.21
CIVIL DATA 2018-19 : Page-140
280.80
103.00
24.94
213.75
462.00
1120.00
448.94
26.53
2679.97
sing screened sand for drop walls, fins with rabbit wire mesh & nomianl
neer - In - Charge with dubara sponge finishing,including cost and
erationals &incidental,cost and conveyance of cement,wire mesh,water to
m work,lift charges etc., and overheads & contractors profit complete for
ost of steel and its fabrication charges for finished item of work(APSS
199.50
936.00
195.00
343.35
3800.00
490.00
4000.00
2072.50
CIVIL DATA 2018-19 : Page-141
295.40
483.60
120.90
129.36
13065.61
1306.56
CIVIL DATA 2018-19 : Page-142
andur stone slabs of 15mm to 18mm thick set over a base coat of CM
d over already laid CC bed / RCC roof slab including neat cement slurry of
gs per sqm and jointed with neat cement to full depth including cost and
t, sand, water, flooring stones etc. complete including all labour charges
required size, mixing of cement mortar, laying, lift charges , cost of base
s & contractors profit complete for finished item of work. (APSS No.703 &
2677.29
84.24
128.70
78.00
82.40
1472.50
484.00
344.00
575.13
59.26
5985.52
CIVIL DATA 2018-19 : Page-143
1770.11
84.24
128.70
78.00
82.40
1472.50
484.00
344.00
575.13
50.19
5069.27
e full body Ceramic floor tiles of size 300 x 300 mm and thickness
g to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish
by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm
d already laid or RCC roof slab, including neat cement slurry of honey like
m & jointed neatly with white cement paste to full depth mixed with pigment
all materials like cement, screened sand , water and tiles etc., and
e for finished item of work. (APSS No.701 & 707)
4315.50
84.24
128.70
54.00
82.40
456.00
985.60
1320.00
CIVIL DATA 2018-19 : Page-144
690.40
81.17
8198.01
CIVIL DATA 2018-19 : Page-145
e full body Ceramic floor tiles of size 400 x 400 mm and thickness
g to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish
approved flooring pattern as directed by the Engineer-In -Charge, laying
over base coat of cement mortar (1:8), 12mm thick using screened sand
slab, including neat cement slurry of honey like consistency spread @ 3.3
hite cement paste to full depth mixed with pigment of matching shade,
ment, screened sand , water and tiles etc., and overheads & contractors
. (APSS No.701 & 707)
4357.50
84.24
128.70
54.00
82.40
456.00
985.60
1320.00
690.40
81.59
8240.43
CIVIL DATA 2018-19 : Page-146
vitrified tiles screen printed and polished of size 600 x 600 mm and
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour
th borders and design as per the approved flooring pattern as directed by
ing spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm
ed already laid or RCC roof slab , including neat cement slurry of honey
sqm. and jointed neately with white cement paste to full depth mixed with
cost and conveyance of all materials like cement, sand, water, tiles,
ost of C.C. bed) including cost of base coat and all labour charges for
to required slope as directed by the Engineer- in-charge etc.,and
e for finished item of work. (APSS No.701 & 707)
4389.00
84.24
128.70
162.00
82.40
456.00
985.60
1320.00
690.40
82.98
8381.33
10552.50
84.24
128.70
162.00
82.40
CIVIL DATA 2018-19 : Page-147
456.00
985.60
1320.00
690.40
144.62
14606.46
h polished granite stone slabs other than black and regular colours
er / copper silk / laka red / lavender blue) with borders and design as per
in-Charge of length not less than 2.43 mts set over base coat of cement
ned sand over CC bed already laid or RCC roof slab including neat grey
y spread @ 3.3 Kg per sqm and jointed neatly with white cement paste
to full depth including cost and conveyance of all materials like cement ,
work site and all operational, incidental labour & lift charges, polishing
eads & contractors profit complete for finished item of work (S.S.701 &
24591.00
140.40
128.70
162.00
137.34
1425.00
440.00
3200.00
1266.25
314.91
31805.59
CIVIL DATA 2018-19 : Page-148
20905.50
140.40
128.70
162.00
137.34
1425.00
440.00
3200.00
1266.25
283.39
5301.06
558.45
339.48
34287.56
187.52
468.00
51.40
100.00
593.75
26.40
1200.00
455.04
30.82
3112.93
CIVIL DATA 2018-19 : Page-149
CIVIL DATA 2018-19 : Page-150
2688.00
112.32
128.70
162.00
82.40
456.00
985.60
1320.00
690.40
66.25
6691.68
CIVIL DATA 2018-19 : Page-151
2677.29
134.78
128.70
78.00
82.40
1472.50
484.00
344.00
575.13
1666.50
166.65
78.10
7888.05
2677.29
82.40
134.78
128.70
456.00
985.60
1240.00
670.40
63.75
6438.93
CIVIL DATA 2018-19 : Page-152
2655.16
134.78
128.70
78.00
82.40
1472.50
484.00
344.00
575.13
1666.50
166.65
77.88
7865.70
2655.16
82.40
134.78
128.70
456.00
985.60
1240.00
670.40
63.53
CIVIL DATA 2018-19 : Page-153
6416.58
ished granite stone slabs other than black and regular colours (i.e. of
opper silk / laka red / lavender blue) with borders and design as per the
Charge of length not less than 2.43 mts set over base coat of cement
ned sand over CC bed already laid or RCC roof slab including neat grey
y spread @ 3.3 Kg per sqm and jointed neatly with white cement paste
to full depth including cost and conveyance of all materials like cement ,
k site and all operational, incidental labour & lift charges, half rounding the
ost of base coat and overheads & contractors profit complete for finished
S.701 & special)
24591.00
134.78
128.70
162.00
82.40
1425.00
440.00
3200.00
1266.25
566.61
10598.94
1116.56
437.12
44149.36
24591.00
CIVIL DATA 2018-19 : Page-154
82.40
134.78
128.70
135.00
1133.39
113.34
997.50
1960.00
739.38
300.15
30315.65
CIVIL DATA 2018-19 : Page-155
2677.29
82.40
134.78
128.70
456.00
985.60
1240.00
670.40
63.75
6438.93
1689.65
82.40
134.78
128.70
456.00
985.60
CIVIL DATA 2018-19 : Page-156
1240.00
670.40
53.88
5441.41
CIVIL DATA 2018-19 : Page-157
o 10 cm height with non-skid red or white full body ceramic floor tiles
lity of any colour and finish in all shades and designs as approved by
ooring tiles, set over base coat of CM(1:5) 12 mm thick using screened
consistency spread at the rate of 3.30 kgs per sqm and jointing with white
matching shade to full depth, including cost of all materials like tiles,
contractors profit complete for finished item of work.(APSS No.701 &707)
4357.50
82.40
134.78
128.70
162.00
365.75
320.00
171.44
57.23
5779.80
4389.00
82.40
134.78
128.70
54.00
CIVIL DATA 2018-19 : Page-158
456.00
985.60
1320.00
690.40
82.41
8323.30
10552.50
82.40
134.78
128.70
135.00
456.00
985.60
1320.00
690.40
144.85
14630.24
thick mirror polished granite tiles length equal to flooring tiles, set over
ng screened sand with cement slurry of honey like consistency spread at
ng with white cement paste mixed with pigment of matching shade to full
ke tiles, cement, sand and water etc., and overheads & contractors profit
SS No.701 &707)
CIVIL DATA 2018-19 : Page-159
10552.50
82.40
134.78
128.70
135.00
456.00
985.60
1320.00
690.40
144.85
14630.24
CIVIL DATA 2018-19 : Page-160
24591.00
82.40
134.78
128.70
135.00
1133.39
113.34
997.50
1960.00
739.38
300.15
30315.65
24591.00
82.40
134.78
128.70
135.00
1133.39
CIVIL DATA 2018-19 : Page-161
113.34
997.50
1960.00
739.38
300.15
30315.65
azed red or white full body ceramic wall tiles of size 200 x 300 mm /
m 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of
designs with borders as approved by Engineer-in-Charge set over base
ened sand with cement slurry of honey like consistency spread at the rate
white cement paste mixed with pigment of matching shade to full depth,
cement, sand and water etc., and overheads & contractors profit complete
3391.50
82.40
134.78
128.70
162.00
365.75
320.00
171.44
47.57
4804.14
CIVIL DATA 2018-19 : Page-162
lazed full body porcelain wall tiles of size 300 x 600 mm with any type
sh, wooden, bamboo, stone finishes etc., scratch less, stain free and
conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour
with borders and design as per the approved pattern as approved by
of CM(1:5) 12 mm thick using screened sand with cement slurry of honey
.30 kgs per sqm and jointing with white cement paste mixed with pigment
uding cost of all materials like tiles, cement, sand and water etc., and
e for finished item of work.
5817.00
82.40
134.78
128.70
54.00
CIVIL DATA 2018-19 : Page-163
456.00
985.60
1320.00
690.40
96.69
9765.58
Cement Concrete (1:5:10) proportion using brick jelly for low roofs
materials like cement, sand, brick bats etc., to site including cost of all
mming, curing , overheads & contractors profit etc., complete for finished
505.44
966.56
272.11
123.60
147.70
241.80
60.45
47.50
556.00
150.88
3072.04
CIVIL DATA 2018-19 : Page-164
505.44
866.57
272.11
79.33
73.48
1880.00
508.20
147.70
241.80
29.40
174.10
103.98
123.60
5005.70
teel (grade 304) hand railing as per approved drawing with top rail of
m class and vertical posts of 25mm dia and 1.6mm thick medium class 1
e of 75mm dia using bonding agent and anchor fastner and welding,
matic compressor for fixing railing, buffing, polishing all members of the
to present seamless finish including cost and conveyance of all materials,
all consumables, labour charges , overheads & contractors profit etc.,
7083.40
2803.40
217.10
1040.00
390.00
195.00
CIVIL DATA 2018-19 : Page-165
11728.90
2549.76
2833.07
0.00
2833.07
2833
CIVIL DATA 2018-19 : Page-166
eel (grade 304) railing for ramp as per approved drawing with top rail of
class fixed in to wall with 25mm dia pipe of 0.30m length @ 1m centre to
all members of the railing thouroughly , lacquer finishing to present
conveyance of all materials, electrodes, welding charges, cost of all
ads & contractors profit etc., complete for finished item of work.
8705.30
3445.30
150.30
270.00
12570.90
1257.09
0.00
1257.09
1257
C down water take pipes with socket , 2.5mm thick 4.0 kg/sq.cm pressure
ary PVC Bends, shoes, iron / PVC clamps and all other accessories and
onveyance of all materials, operational & incidental charges including all
and overheads & contractors profit complete for finished item of work.
972.00
45.00
420.00
1437.00
239.50
0.00
239.50
240
340.00
28.50
26.40
110.00
41.23
546.13
CIVIL DATA 2018-19 : Page-167
54.00
34.65
64.68
128.00
56.83
3.38
341.54
0.00
341.54
34.15
34
655.96
150.15
280.28
364.00
198.61
16.49
1665.49
0.00
1665.49
166.55
167
CIVIL DATA 2018-19 : Page-168
1124.70
150.15
280.28
364.00
198.61
21.18
10.30
79.50
19.88
2248.59
0.00
2248.59
224.86
225
13.50
44.00
83.60
130.90
198.00
369.60
173.80
10.13
1023.53
0.00
1023.53
102.35
102
CIVIL DATA 2018-19 : Page-169
130.90
198.00
369.60
141.90
8.40
848.80
0.00
848.80
84.88
85
27.00
44.00
83.60
89.68
82.50
154.00
600.00
241.03
13.22
1335.02
0.00
1335.02
133.50
134
89.68
82.50
154.00
600.00
209.13
11.35
1146.66
0.00
CIVIL DATA 2018-19 : Page-170
1146.66
114.67
115
ter based cement primer of interior grade I and two coats of acrylic
Organic Compound) content less than 50 grams/litre for internal walls
materials to site, incidental, operational and all labour charges etc., and
e for finished item of work in all floors.
141.00
115.50
215.60
134.40
198.00
369.60
224.68
13.99
1412.76
0.00
1412.76
141.28
141
ter based cement primer of exterior grade II and two coats of acrylic
(Volatile Organic Compound) content less than 50 grams/litre for exterior
of all materials to site, incidental, operational and all labour charges etc.,
mplete for finished item of work in all floors.
180.00
115.50
215.60
134.40
115.50
215.60
600.00
315.55
18.92
1911.07
0.00
1911.07
191.11
191
CIVIL DATA 2018-19 : Page-171
h shutters with lappam finish , over a primary coat and painting two
de-I VOC (Volatile Organic Compound) content less than 50 grams/litre of
nveyance of all materials to site cost of primer coat and all labour charges
paper on lappam coats for neat finish and overheads & contractors profit
1207 & 1211).
130.00
91.00
115.50
215.60
270.00
198.00
369.60
224.68
16.14
1630.52
0.00
1630.52
163.05
163
247.50
198.00
369.60
141.90
9.57
966.57
0.00
966.57
96.66
97
work using red oxide Iron primer paint grade - 1 of approved brand
aterials to site , all labour charges etc., and overheads & contractors profit
1212 & 1207).
84.70
115.50
215.60
82.78
4.99
503.56
0.00
CIVIL DATA 2018-19 : Page-172
503.56
50.36
50
247.50
181.50
338.80
130.08
8.98
906.85
0.00
906.85
90.69
91
84.70
247.50
115.50
215.60
181.50
338.80
212.85
13.96
1410.41
0.00
1410.41
141.04
141
CIVIL DATA 2018-19 : Page-173
namel paint Gr-I having VOC (Volatile Organic Compound) content less
cluding cost and conveyance of all materials to site, incidental, operational
s & contractors profit etc., complete for finished item of work in all floors.
202.50
181.50
338.80
130.08
8.53
861.40
0.00
861.40
86.14
86
oors using French spirit polish of approved brand for new wood work to
sand papering to smooth surfaces etc. including cost and conveyance of
etc., complete for finished item of work in all floors.
38.76
148.33
528.00
985.60
378.40
20.79
2099.88
0.00
2099.88
209.99
210
CIVIL DATA 2018-19 : Page-174
Glossy/ Matt finish to the wood works duly cleaning the surface and
with 180 No., emery paper and then with 320 No., emery paper, clean &
knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3
y paper, apply two component wood sealer, air dry for 24 hrs, Sand with
coat of approved spraying thinner (for spraying)/ applying one coat of
purpose thinner (for brushing) and apply (either with spray or brush) two
luding cost & labour charges, emery papers, cost of thinner & melamine
it etc., complete for finished item of work
18.53
3.93
132.00
246.40
320.00
174.60
8.95
904.41
0.00
904.41
904
ater Proof Polish Glossy/ Matt finish to the wood works duly cleaning
Sand the wood with 180 No., emery paper and then with 320 No., emery
lying suitable knifing paste filler / wood filler by putty knife / muslin pad, air
320 No., emery paper, applying two component wood sealer, after the
of approved spraying PU thinner (for spraying) / applying one coat of
ral purpose thinner (for brushing) and apply one coat of PU by brush or
th 180 No. emery paper and removing dust, applying second coat of PU,
No emery paper, and applying (either with spray or brush) two coats of
bour charges, emery papers, cost of thinner & Poly-Urethane Water Proof
t etc., complete for finished item of work
37.64
3.93
132.00
246.40
320.00
174.60
9.15
923.71
0.00
923.71
924
2907.00
0.00
2907.00
2907
2543.00
0.00
2543.00
2543
567.00
0.00
567.00
567
int filler board for buildings, columns, beams and slabs 25 mm thick
aterials to site, all incidental, operational, labour charges etc.overheads &
item of work as per approved drawing for all floors
329.00
0.00
329.00
329
256.00
165.00
421.00
64.00
0.00
64.00
CIVIL DATA 2018-19 : Page-176
64
CIVIL DATA 2018-19 : Page-177
mposite cladding 4mm thick of approved make with skin material 0.25
erial natural polyethylene aluminium cladding panel fixed with extruded
angle cleats, weather sealants, rivets, GI brackets all as approved, using
including necessary accessories complete in all respects including all
eads & contractors profit complete for finished item of work but excluding
.
2387.00
0.00
2387.00
2387
mposite cladding 4mm thick of approved make with skin material 0.50
erial natural polyethylene aluminium cladding panel fixed with extruded
angle cleats, weather sealants, rivets, GI brackets all as approved, using
including necessary accessories complete in all respects including all
heads & contractors profit etc., complete for finished item of work but
ation if any.
2678.00
0.00
2678.00
2678
6625.00
0.00
6625.00
6625
mables etc. and scaffolding charges, form work, overheads & contractor
work in all floors.
5355.00
0.00
5355.00
5355
made of pre painted steel (base steel as per IS 513 of 0.6 mm thick D
Zinc of 120 GSM) Primer coated with epoxy primer of 5-7 microns thick,
12- 16 microns thick and back coated with 5-7 microns thick alkyd backer.
52 mm, section for mullion should be 46 x 70 mm and section for beading
hould be paneled with 5 mm thick plain float Glass with Ethyl Propylene
The sections are to be cut to length, mitre joined with corner bracket.
mullion cap. Handle made of high grade Aluminium powder coated and
l propylene Diamine Monomer (EPDM) Corner brackets made of CRCA
de of Glass filled nylon. The above frames should be fixed to the concrete
ding screws,overheads & contractor profit etc., complete for finished item
5466.00
0.00
5466.00
5466
4295.00
0.00
4295.00
4295
tal level 13 mm - Mineral Fiber Ceiling tile of 595 x 595 (Square edge
Galvanized Steel section exposed surface with pre-coated capping, main
0 mm c/c maximum and rotary stitched cross tee of size 24 x 27 mm at
f size 24 mm x 25 mm at 1200 mm c/c and wall angle of size 19 x 19 mm
bove grid is suspended at every 1200 mm c/c in both directions using 2.0
luding cost and conveyance of all materials and labour charges such as
rk exposing roof making, overheads & contractor profit etc., complete for
ors.
321.00
13.60
64.00
62.40
10.24
2.56
66.00
CIVIL DATA 2018-19 : Page-179
52.80
13.20
10.56
6.60
6.60
28.80
46.14
CIVIL DATA 2018-19 : Page-180
32.64
30.40
767.54
7.68
775.22
0.00
775.22
775
tal level 15 mm - Mineral Fiber Ceiling tile of 595 x 595 (Square edge
Galvanized Steel section exposed surface with pre-coated capping, main
0 mm c/c maximum and rotary stitched cross tee of size 24 x 27 mm at
f size 24 mm x 25 mm at 1200 mm c/c and wall angle of size 19 x 19 mm
bove grid is suspended at every 1200 mm c/c in both directions using 2.0
luding cost and conveyance of all materials and labour charges such as
rk exposing roof making, overheads & contractor profit etc., complete for
ors.
416.00
13.60
64.00
62.40
10.24
2.56
66.00
52.80
13.20
10.56
6.60
6.60
28.80
46.14
32.64
30.40
862.54
8.63
871.17
0.00
871.17
871
CIVIL DATA 2018-19 : Page-181
216.30
40.32
60.48
59.64
25.20
5.52
1.28
1.92
36.00
13.75
5.84
18.00
66.00
52.80
13.20
10.56
6.60
13.20
28.80
47.79
32.64
60.80
816.64
8.17
824.81
0.00
824.81
825
CIVIL DATA 2018-19 : Page-182
238.00
14.00
147.20
14.08
2.56
3.84
16.08
18.00
66.00
52.80
13.20
10.56
6.60
6.60
28.80
46.14
32.64
30.40
747.50
7.48
754.98
0.00
754.98
755
CIVIL DATA 2018-19 : Page-183
alse ceiling in true horizontal level 600mm x 600mm using 12mm thick
m Tee sections of size 24.50mm x 24.0mm x 2.4mm in grid with cross tee
mm center to center and anodised aluminium wall angle of size 24mm x
d the above grid is suspended at every 1200mm center to center in both
or finished of size 600mm x 600mm including cost and conveyance of all
s cutting , fixing of standing of frame work exposing roof complete for
ate is inclusive of overheads & contractor profit).
22.00
9.60
92.80
10.24
2.56
59.40
47.52
11.00
22.00
80.00
54.98
16.32
30.40
458.82
4.59
463.41
0.00
463.41
463
inal bore Medium Grade properties & weight as per IS 1239 ISI mark MS
cost and conveyance of all materials to work site and all operational,
e for finished item of work in all floors for stair case head room roof.
280.50
137.70
25.50
20.15
463.85
0.00
463.85
464
CIVIL DATA 2018-19 : Page-184
0.80mm thick fixed with G.I ‘J’ bolts & nuts 8 mm dia with bitumen & G.I
including a coat of approved steel primer and two coats of approved paint
p to a pitch of 600) etc., complete, excluding the cost of purlins, rafters,
e of all materials , labour charges , overheads and contractors profit etc.,
floors.
6082.31
239.55
395.10
183.64
183.64
23.24
45.00
369.60
364.00
9.90
18.48
24.00
23.10
43.12
56.00
227.05
8287.73
828.77
0.00
828.77
829
4053.00
239.55
395.10
183.64
183.64
369.60
364.00
183.40
CIVIL DATA 2018-19 : Page-185
5971.93
597.19
0.00
597.19
597
CIVIL DATA 2018-19 : Page-186
0.00
960.00
3200.00
1040.00
16417.20
3276.00
5083.20
5083.20
164621.16
105000.84
304681.60
1015.61
0.00
1015.61
1016.00
CIVIL DATA 2018-19 : Page-187
2375.00
2200.00
60000.00
2400.00
2400.00
475.00
17462.50
5317.20
8704.80
2176.20
264.60
1566.90
391.73
450.00
432.00
400.00
3276.00
924.40
CIVIL DATA 2018-19 : Page-188
81044.21
20408.29
102375.00
7425.00
5056.80
1824.00
450.00
289.80
13054.00
1854.00
2706.00
347703.43
10431.10
358134.53
0.00
358134.53
4775.13
4775
Joinery data 2018-19 - Page : 65
JOINERY DATA
COMMON SoR 2018-2019
b) Labour charges for aluminium doors ( S.No.11 of Page No. 396 of SoR 2011-12 )
1st class carpenter 0.099 Nos. 550.00 Each
2nd class carpenter 0.198 Nos. 440.00 Each
Power Saw Cutter -Hand Operated -Operator 0.099 Nos. 550.00 Each
Power Drill -Hand Operated -Operator 0.099 Nos. 550.00 Each
Mazdoor(Unskilled) 0.297 Nos. 400.00 Each
Non-technical work inspector 0.099 Nos. 500.00 Each
Add for MA @ 25% 0.25 418.77
Machinery
Power Saw Cutter -Hand Operated -Hire charges 0.793 Hrs 102.00 1 Hour
Power Drill -Hand Operated -Hire charges 0.793 Hrs 95.00 1 Hour
c) Labour charges for aluminium sliding windows ( S.No.10 of Page No. 395 of SoR 2011-12 )
1st class carpenter 0.096 Nos. 550.00 Each
2nd class carpenter 0.289 Nos. 440.00 Each
Power Saw Cutter -Hand Operated -Operator 0.096 Nos. 550.00 Each
Power Drill -Hand Operated -Operator 0.096 Nos. 550.00 Each
Mazdoor(Unskilled) 0.289 Nos. 400.00 Each
Non-technical work inspector 0.096 Nos. 500.00 Each
Add for MA @ 25% 0.25 449.16
C.Machinery
Power Saw Cutter -Hand Operated -Hire charges 0.771 Hrs 102.00 1 Hour
Power Drill -Hand Operated -Hire charges 0.771 Hrs 95.00 1 Hour
d) Labour charges for aluminium partitions partly glazed ( S.No.8 of Page No. 394 of SoR 2011-12 )
1st class carpenter 0.434 Nos. 550.00 Each
2nd class carpenter 0.434 Nos. 440.00 Each
Power Saw Cutter -Hand Operated -Operator 0.043 Nos. 550.00 Each
Power Drill -Hand Operated -Operator 0.058 Nos. 550.00 Each
Mazdoor(Unskilled) 0.145 Nos. 400.00 Each
Non-technical work inspector 0.072 Nos. 500.00 Each
Add for MA @ 25% 0.25 579.21
C.Machinery
Power Saw Cutter -Hand Operated -Hire charges 0.347 Hrs 102.00 1 Hour
Power Drill -Hand Operated -Hire charges 0.463 Hrs 95.00 1 Hour
Power Saw Cutter -Hand Operated -Hire charges 0.800 Hrs 102.00 1 Hour
Power Drill -Hand Operated -Hire charges 0.800 Hrs 95.00 1 Hour
conveyance to site of teak wood frame, shutters, glass including supply and fixing 6 Nos MS Zhold fasts of siz
300 mm x 40 mm x 5mm including cost of ISI marked brass fixtures of 8 Nos butt hinges(IS:205) 250mm long ,
No. aldrop (IS:2681) 450mm long, 3 Nos tower bolts- 10mm (IS:204) of 200 mm long , 2 Nos 450 mm long fanc
handles, 2 Nos door stoppers, 2 Nos. Rubber / Nylon door stop bushes including fixing the fixtures to door wit
required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter
to the frame, fixing glass in fan light portion etc., including overheads & contractors profit complete for finished item
of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not les
than 40 mm) (3000mm x 2600mm)
Cost analysis
Cost of best TW frame 2 m to 3m length 0.2310 Cum 130525.00 1 Cum
Cost of best TW frame up to 2 m length 0.1184 Cum 122614.00 1 Cum
Cost of 12mm thick tinted glass 4.02 Sqm 1375.00 1 Sqm
Cost of 12mm thick plain float glass 3.78 Sqm 996.00 1 Sqm
Cost of teak wood beading 37.60 RM 26.00 1 RM
Cost of 250mm long brass butt hinges 8 Nos 550.00 Each
Cost of 450mm long brass fancy handles 2 Nos 1384.00 Each
Cost of 450mm long brass heavy duty aldrop 1 No 2982.00 Each
Cost of 200mm long brass tower bolts 3 Nos 317.00 Each
Cost of brass door stoppers 2 Nos 168.00 Each
Cost of Z hold fasts 6 Nos 32.00 Each
Cost of Rubber / Nylon door stop bushes 2 Nos 9.00 Each
Cost of MS Ornamental Grill 4.02 Sqm 1738.39 1 Sqm
Labour charges 0.3494 Cum 11892.10 1 Cum
Add for MA @ 25% 0.25 4155.10
Labour charges for fixing glass 7.80 Sqm 286.00 1 Sqm
Add for MA @ 25% 0.25 2230.80
Labour charges for glass designing work( Etching
work) 3.78 Sqm 955.00 1 Sqm
Add for MA @ 25% 0.25 3609.90
Add for screws and nails
Joinery data 2018-19 - Page : 68
Rate for 7.80 sqm
Rate for 1 sqm
Overheads&Contractors Profit @13.615% 0.00000 11034.62
Rate for 1 sqm
Say
Joinery data 2018-19 - Page : 69
2 Supply and fixing of ornamental grill made of 25mm x 5mm MS flats for fixing in fan light portion and side fixe
panels for door cum window as per the approved drawing including cutting the flat to required length, welding
painting with red oxide single coat including cost and conveyance of all materials, labour charges etc., complete fo
finished otem of work.
including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 nos MS Z
hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked brass fixtures of 6 Nos butt hinges (IS:205
150mm long , 1 No. aldrop (IS:2681) 300mm long, 2 Nos tower bolts- 10mm (IS:204) of 200 mm long at top, 1 No
tower bolt- 10mm bolt (IS:204) 150mm long at bottom, 2 Nos. 150mm long fancy handles (IS:208) , 2 Nos doo
stopper and 2 Nos Rubber / Nylon door stop bushes including fixing the fixtures to door with required number o
screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, fixin
glass in fan light portion etc., including overheads & contractors profit complete for finished item of work as per APS
1001 & 1002 The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (2000mm
x 2600mm)
(BLD-CSTN-13-16)
Size : 2.00m x 2.60 m 5.20
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393
Outer frame - Horizontal 2 x 2.00 + 0.50
= 4.50 x 0.10 x 0.065 0.02925
0.06318
Cost analysis
Cost of best TW frame 2 m to 3m length 0.03393 cum 130525.00 1 cum
Cost of best TW frame up to 2 m length 0.02925 cum 122614.00 1 cum
Cost of 4 mm thick pin headed glass 1.00 sqm 280.00 1 sqm
Cost of TW beading 6.00 RM 26.00 1 RM
Cost of 35 mm thick flush shutter 3.895 sqm 1355.00 1 sqm
Cost of MS Z hold fasts 6 Nos. 32.00 Each
Cost of brass tower bolt 200mm long 2 Nos. 317.00 Each
Cost of brass tower bolt 150mm long 1 No. 231.00 Each
Cost of brass Butt hinges 150mm long 6 Nos. 324.00 Each
Cost of brass aldrop 300mm long 1 No. 1087.00 Each
Cost of brass fancy handle 150mm long 2 Nos. 284.00 Each
Cost of brass door stopper 2 Nos. 168.00 Each
Cost of Rubber / Nylon door stop bushes 2 Nos. 9.00 Each
Cost of 10mm MS square bars 3.14 Kgs 42000.00 1000 Kgs
Labour charges for frame work 0.06318 cum 11892.10 1 cum
Add for MA @ 25% 0.25 751.34
Labour charges for fixing flush door shutter to the
frame , fixing the fixtures to the shutter 3.895 sqm 383.00 1 sqm
Add for MA @ 25% 0.25 1491.79
Labour charges for fixing glass 1.00 sqm 286.00 1 sqm
Add for MA @ 25% 0.25 286.00
Add for nails & screws etc.
Rate for 5.20 sqm
Overheads&Contractors Profit @13.615% 0.00000 22035.00
including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z
hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 6 Nos. butt hinge
(IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts - 10mm (IS:204) of 200 mm long a
top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. Rubber / Nylon door stop bushe
including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixin
the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc., including overheads
contractors profit complete for finished item of work as per APSS 1001 & 1002 The vertical frame of door shall b
embedded in flooring for a depth of not less than 10 mm) (1800mm x 2600mm)
(BLD-CSTN-13-16)
Size : 1.80m x 2.60m 4.68
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393
Outer frame - Horizontal 2 x 1.80 + 0.50
= 4.10 x 0.10 x 0.065 0.02665
0.06058
including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS
hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Alumimium fixtures of 6 Nos. butt hinge
(IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia a
top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. Rubber / Nylon door stop bushe
including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixin
the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc., including overheads
contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall b
embedded in flooring for a depth of not less than 10 mm) (1500mm x 2600mm)
(BLD-CSTN-13-16)
Size : 1.50m x 2.60m 3.90
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393
Outer frame - Horizontal 2 x 1.50 + 0.50
= 3.50 x 0.10 x 0.065 0.02275
0.05668
Cost analysis
Cost of medium TW frame 2 m to 3m length 0.03393 cum 79106.00 1 cum
Cost of medium TW frame up to 2 m length 0.02275 cum 71195.00 1 cum
Cost of 4 mm thick pin headed glass 0.90 sqm 280.00 1 sqm
Cost of TW beading 8.40 RM 26.00 1 RM
Cost of 30 mm thick flush shutter 2.87 sqm 1196.00 1 sqm
Cost of MS Z hold fasts 6 Nos. 32.00 Each
Cost of Aluminium tower bolt 200mm long 2 Nos. 114.00 Each
Cost of Aluminium butt hinges 150mm long 6 Nos. 133.00 Each
Cost of Aluminium aldrop 300mm long 1 No. 342.00 Each
Cost of Aluminium handle 150mm long 2 Nos. 114.00 Each
Cost of Aluminium door stopper 2 Nos. 53.00 Each
Cost of Rubber / Nylon door stop bushes 2 Nos. 9.00 Each
Cost of 10mm MS square bars 2.355 Kgs 42000.00 1000 Kgs
Labour charges for frame work 0.05668 cum 11892.10 1 cum
Add for MA @ 25% 0.25 674.04
Labour charges for fixing flush door shutter to the
frame , fixing the fixtures to the shutter 2.87 sqm 383.00 1 sqm
Add for MA @ 25% 0.25 1099.21
Labour charges for fixing glass 0.90 sqm 286.00 1 sqm
Add for MA @ 25% 0.25 257.40
Add for nails & screws etc.
Rate for 3.90 sqm
Overheads&Contractors Profit @13.615% 0.00000 12760.00
including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS
hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 6 Nos. butt hinge
(IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top
2 Nos. 150mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. Rubber / Nylon door stop bushes includin
fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the fram
in position, fixing the shutter to the frame, fixing glass in fan light portion etc, including overheads & contractors pro
complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded
flooring for a depth of not less than 10 mm) (1200mm x 2600mm)
(BLD-CSTN-13-16)
Size : 1.20m x 2.60m 3.12
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393
Outer frame - Horizontal 2 x 1.20 + 0.50
= 2.90 x 0.10 x 0.065 0.01885
0.05278
Cost analysis
Cost of medium TW frame 2 m to 3m length 0.03393 cum 79106.00 1 cum
Cost of medium TW frame up to 2 m length 0.01885 cum 71195.00 1 cum
Cost of 4 mm thick pin headed glass 0.72 sqm 280.00 1 sqm
Cost of TW beading 7.20 RM 26.00 1 RM
Cost of 30 mm thick flush shutter 2.255 sqm 1196.00 1 sqm
Cost of MS Z hold fasts 6 Nos. 32.00 Each
Cost of Aluminium tower bolt 200mm long 2 Nos. 114.00 Each
Cost of Aluminium butt hinges 150mm long 6 Nos. 133.00 Each
Cost of Aluminium aldrop 300mm long 1 No. 342.00 Each
Cost of Aluminium handle 150mm long 2 Nos. 114.00 Each
Cost of Aluminium door stopper 2 Nos. 53.00 Each
Cost of Rubber / Nylon door stop bushes 2 Nos. 9.00 Each
Cost of 10mm MS square bars 1.884 Kgs 42000.00 1000 Kgs
Labour charges for frame work 0.0528 cum 11892.10 1 cum
Add for MA @ 25% 0.25 627.67
Labour charges for fixing flush door shutter to the
frame , fixing the fixtures to the shutter 2.255 sqm 383.00 1 sqm
Add for MA @ 25% 0.25 863.67
Labour charges for fixing glass 0.72 sqm 286.00 1 sqm
Add for MA @ 25% 0.25 205.92
Add for nails & screws etc.
Rate for 3.12 sqm
Overheads&Contractors Profit @13.615% 0.00000 11225.00
6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 3 Nos. bu
hinges (IS:205) 150mm long , 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm d
at top, 2 Nos. 150mm long handles (IS:208), 1 No. door stopper and 1 No. Rubber / Nylon door stop bushe
including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixin
the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc, including overheads
contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall b
embedded in flooring for a depth of not less than 10 mm) (1000mm x 2600mm)
(BLD-CSTN-13-16)
Size : 1.00m x 2.60m 2.60
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393
Outer frame - Horizontal 2 x 1.00
= 2.00 x 0.10 x 0.065 0.01300
0.04693
Cost analysis
Cost of medium TW frame 2 m to 3m length 0.03393 cum 79106.00 1 cum
Cost of medium TW frame up to 2 m length 0.0130 cum 71195.00 1 cum
Cost of 4 mm thick pin headed glass 0.60 sqm 280.00 1 sqm
Cost of TW beading 3.20 RM 26.00 1 RM
Cost of 30 mm thick flush shutter 1.845 sqm 1196.00 1 sqm
Cost of MS Z hold fasts 6 Nos. 32.00 Each
Cost of Aluminium tower bolt 200mm long 1 No. 114.00 Each
Cost of Aluminium butt hinges 150mm long 3 Nos. 133.00 Each
Cost of Aluminium aldrop 300mm long 1 No. 342.00 Each
Cost of Aluminium handle 150mm long 2 Nos. 114.00 Each
Cost of Aluminium door stopper 1 No. 53.00 Each
Cost of Rubber / Nylon door stop bushes 1 No. 9.00 Each
Cost of 10mm MS square bars 1.57 Kgs 42000.00 1000 Kgs
Labour charges for frame work 0.0469 cum 11892.10 1 cum
Add for MA @ 25% 0.25 558.10
Labour charges for fixing flush door shutter to the
frame , fixing the fixtures to the shutter 1.845 sqm 383.00 1 sqm
Add for MA @ 25% 0.25 706.64
Labour charges for fixing glass 0.60 sqm 286.00 1 sqm
Add for MA @ 25% 0.25 171.60
Add for nails & screws etc.
Rate for 2.60 sqm
Overheads&Contractors Profit @13.615% 0.00000 9270.00
6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 3 Nos. bu
hinges (IS:205) 150mm long , 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm d
at top, 2 Nos. 150mm long handles (IS:208), 1 No. door stopper and 1 No. Rubber / Nylon door stop bushe
including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixin
the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc, including overheads
contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall b
embedded in flooring for a depth of not less than 10 mm) (900mm x 2600mm)
(BLD-CSTN-13-16)
Size : 0.90m x 2.60m 2.34
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393
Outer frame - Horizontal 2 x 0.90
= 1.80 x 0.10 x 0.065 0.01170
0.04563
Cost analysis
Cost of medium TW frame 2 m to 3m length 0.03393 cum 79106.00 1 cum
Cost of medium TW frame up to 2 m length 0.0117 cum 71195.00 1 cum
Cost of 4 mm thick pin headed glass 0.54 sqm 280.00 1 sqm
Cost of TW beading 3.00 RM 26.00 1 RM
Cost of 30 mm thick flush shutter 1.640 sqm 1196.00 1 sqm
Cost of MS Z hold fasts 6 Nos. 32.00 Each
Cost of Aluminium tower bolt 200mm long 1 No. 114.00 Each
Cost of Aluminium butt hinges 150mm long 3 Nos. 133.00 Each
Cost of Aluminium aldrop 300mm long 1 No. 342.00 Each
Cost of Aluminium handle 150mm long 2 Nos. 114.00 Each
Cost of Aluminium door stopper 1 No. 53.00 Each
Cost of Rubber / Nylon door stop bushes 1 No. 9.00 Each
Cost of 10mm MS square bars 1.413 Kgs 42000.00 1000 Kgs
Labour charges for frame work 0.0456 cum 11892.10 1 cum
Add for MA @ 25% 0.25 542.64
Labour charges for fixing flush door shutter to the
frame , fixing the fixtures to the shutter 1.640 sqm 383.00 1 sqm
Add for MA @ 25% 0.25 628.12
Labour charges for fixing glass 0.54 sqm 286.00 1 sqm
Add for MA @ 25% 0.25 154.44
Add for nails & screws etc.
Rate for 2.34 sqm
Overheads&Contractors Profit @13.615% 0.00000 8765.00
supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium
fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204
of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. Rubber
Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts includin
labour charges for fixing the frame in position, fixing the shutter to the frame etc, including overheads & contractor
profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded
flooring for a depth of not less than 10 mm) (2000mm x 2100mm)
(BLD-CSTN-13-16)
Size : 2.00m x 2.10m 4.20
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743
Outer frame - Horizontal 1 x 2.00
= 2.00 x 0.10 x 0.065 0.01300
0.04043
supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium
fixtures of 6 Nos. butt hinges (IS:205)150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) o
200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. Rubber / Nylo
door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labou
charges for fixing the frame in position, fixing the shutter to the frame etc, including overheads & contractors pro
complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded
flooring for a depth of not less than 10 mm) (1800mm x 2100mm)
(BLD-CSTN-13-16)
Size : 1.80m x 2.10m 3.78
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743
Outer frame - Horizontal 1 x 1.80
= 1.80 x 0.10 x 0.065 0.01170
0.03913
supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium
fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204
of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. Rubber
Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts includin
labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractor
profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded
flooring for a depth of not less than 10 mm) (1500mm x 2100mm)
(BLD-CSTN-13-16)
Size : 1.50m x 2.10m 3.15
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743
Outer frame - Horizontal 1 x 1.50
= 1.50 x 0.10 x 0.065 0.00975
0.03718
supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Alumium
fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204
of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. Rubber
Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts includin
labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractor
profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded
flooring for a depth of not less than 10 mm) (1200mm x 2100mm)
(BLD-CSTN-13-16)
Size : 1.20m x 2.10m 2.52
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743
Outer frame - Horizontal 1 x 1.20
= 1.20 x 0.10 x 0.065 0.00780
0.03523
fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of
Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 1
mm dia at top , 2 Nos. 150 mm long handles (IS:208), 1 No. door stopper and 1 No. Rubber / Nylon door sto
bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charge
for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complet
for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for
depth of not less than 10 mm) (1000mm x 2100mm)
(BLD-CSTN-13-16)
Size : 1.00m x 2.10m 2.10
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743
Outer frame - Horizontal 1 x 1.00
= 1.00 x 0.10 x 0.065 0.00650
0.03393
Cost analysis
Cost of medium TW frame 2 m to 3m length 0.02743 cum 79106.00 1 cum
Cost of medium TW frame up to 2 m length 0.00650 cum 71195.00 1 cum
Cost of 30 mm thick flush shutter 1.845 sqm 1196.00 1 sqm
Cost of MS Z hold fasts 6 Nos. 32.00 Each
Cost of Aluminium tower bolt 200mm long 1 No. 114.00 Each
Cost of Aluminium butt hinges 150mm long 3 Nos. 133.00 Each
Cost of Aluminium aldrop 300mm long 1 No. 342.00 Each
Cost of Aluminium handle 150mm long 2 Nos. 114.00 Each
Cost of Aluminium door stopper 1 No. 53.00 Each
Cost of Rubber / Nylon door stop bushes 1 No. 9.00 Each
Labour charges for frame work 0.0339 cum 11892.10 1 cum
Add for MA @ 25% 0.25 403.50
Labour charges for fixing flush door shutter to the
frame , fixing the fixtures to the shutter 1.845 sqm 383.00 1 sqm
Add for MA @ 25% 0.25 706.64
Add for nails & screws etc.
Rate for 2.10 sqm
Overheads&Contractors Profit @13.615% 0.00000 7565.00
fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of
Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 1
mm dia at top, 2 Nos. 150 mm long handles (IS:208), 1 No. door stopper and 1 No. Rubber / Nylon door stop bushe
including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixin
the frame in position, fixing the shutter to the frame etc, including overheads & contractors profit complete fo
finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a dept
of not less than 10 mm) (900mm x 2100mm)
(BLD-CSTN-13-16)
Size : 0.90m x 2.10m 1.89
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743
Outer frame - Horizontal 1 x 0.90
= 0.90 x 0.10 x 0.065 0.00585
0.03328
Cost analysis
Cost of medium TW frame 2 m to 3m length 0.02743 cum 79106.00 1 cum
Cost of medium TW frame up to 2 m length 0.00585 cum 71195.00 1 cum
Cost of 30 mm thick flush shutter 1.64 sqm 1196.00 1 sqm
Cost of MS Z hold fasts 6 Nos. 32.00 Each
Cost of Aluminium tower bolt 200mm long 1 No. 114.00 Each
Cost of Aluminium butt hinges 150mm long 3 Nos. 133.00 Each
Cost of Aluminium aldrop 300mm long 1 No. 342.00 Each
Cost of Aluminium handle 150mm long 2 Nos. 114.00 Each
Cost of Aluminium door stopper 1 No. 53.00 Each
Cost of Rubber / Nylon door stop bushes 1 No. 9.00 Each
Labour charges for frame work 0.03328 cum 11892.10 1 cum
Add for MA @ 25% 0.25 395.77
Labour charges for fixing flush door shutter to the
frame , fixing the fixtures to the shutter 1.64 sqm 383.00 1 sqm
Add for MA @ 25% 0.25 628.12
Add for nails & screws etc.
Rate for 1.89 sqm
Overheads&Contractors Profit @13.615% 0.00000 7165.00
1 No. tower bolt (IS:204) of 150 mm x 10mm dia, 2 Nos. 125mm long handles (IS:208),1 No. Rubber / Nylon doo
stop bushes including PVC door cladding 1.50mm thick to the flush doors shutters pasted with Fevicol complete a
per direction of Engineer –in – charge, manufacturers specification and drawing to full height of the shutter insid
including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads
contractors profit complete for finished item of work as per APSS 1001 & 1002. (The vertical frame of door shall b
embedded in flooring for deth of not less than 10mm) (800mm x 2100mm)
(BLD-CSTN-13-16)
Quantity analysis Size : 0.80m x 2.10m 1.68
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743
Outer frame - Horizontal 1 x 0.80
= 0.80 x 0.10 x 0.065 0.00520
0.03263
Cost analysis
Cost of medium TW frame 2 m to 3m length 0.02743 cum 79106.00 1 cum
Cost of medium TW frame up to 2 m length 0.00520 cum 71195.00 1 cum
Cost of 30 mm thick flush shutter 1.435 sqm 1196.00 1 sqm
Cost of MS Z hold fasts 6 Nos. 32.00 Each
Cost of Aluminium tower bolt 150mm long 1 No. 93.00 Each
Cost of Aluminium butt hinges 150mm long 3 Nos. 133.00 Each
Cost of Aluminium aldrop 250mm long 1 No. 315.00 Each
Cost of Aluminium handle 125mm long 1 No. 102.00 Each
Cost of Rubber / Nylon door stop bushes 1 No. 9.00 Each
Labour charges for frame work 0.0326 cum 11892.10 1 cum
Add for MA @ 25% 0.25 388.04
Labour charges for fixing flush door shutter to the
frame , fixing the fixtures to the shutter 1.435 sqm 383.00 1 sqm
Add for MA @ 25% 0.25 549.61
Labour charges for fixing PVC sheet to flush door
shutter including cost of Fevicol 1.435 sqm 364.00 1 sqm
Add for nails & screws etc.
Rate for 1.68 sqm
Overheads&Contractors Profit @13.615% 0.00000 7065.00
1 No. tower bolt (IS:204) of 150 mm x 10mm dia, 2 Nos. 125mm long handles (IS:208),1 No. Rubber / Nylon doo
stop bushes including PVC door cladding 1.50mm thick to the flush doors shutters pasted with Fevicol complete a
per direction of Engineer –in – charge, manufacturers specification and drawing to full height of the shutter insid
including labour charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads
contractors profit complete for finished item of work as per APSS 1001 & 1002. (The vertical frame of door shall b
embedded in flooring for deth of not less than 10mm) (750mm x 2100mm)
(BLD-CSTN-13-16)
Quantity analysis Size : 0.75m x 2.10m 1.575
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743
Outer frame - Horizontal 1 x 0.75
= 0.75 x 0.10 x 0.065 0.00488
0.03231
Cost analysis
Cost of medium TW frame 2 m to 3m length 0.02743 cum 79106.00 1 cum
Cost of medium TW frame up to 2 m length 0.00488 cum 71195.00 1 cum
Cost of 30 mm thick flush shutter 1.333 sqm 1196.00 1 sqm
Cost of MS Z hold fasts 6 Nos. 32.00 Each
Cost of Aluminium tower bolt 150mm long 1 No. 93.00 Each
Cost of Aluminium butt hinges 150mm long 3 Nos. 133.00 Each
Cost of Aluminium aldrop 250mm long 1 No. 315.00 Each
Cost of Aluminium handle 125mm long 1 No. 102.00 Each
Cost of Rubber / Nylon door stop bushes 1 No. 9.00 Each
Labour charges for frame work 0.03231 cum 11892.10 1 cum
Add for MA @ 25% 0.25 384.23
Labour charges for fixing flush door shutter to the
frame , fixing the fixtures to the shutter 1.333 sqm 383.00 1 sqm
Add for MA @ 25% 0.25 510.54
Labour charges for fixing PVC sheet to flush door
shutter including cost of Fevicol 1.333 sqm 364.00 1 sqm
Add for nails & screws etc.
Rate for 1.575 sqm
Overheads&Contractors Profit @13.615% 0.00000 6826.86
17 Supplying and fixing single side prelam solid panel PVC door frame (Choukhat): Providing and fixing facto
made Pac single side Prelam door frame of the size 50x7 mm with a wall thickness of 5mm, made out of extrude
5mm rigid Pac single side prelam sheet, meter cut at two corners and joined with 2 Nos. of 150mm long brackets o
1515mm MS Square tube. The two vertical door profiles are to be reinforced with 19 x 19mm MS. square tube of 1
guage. The door frame shall be fixed to the wall using 65/100mm long MS. Screws through the frame by using Pa
fasteners. a minimum of 4 Nos. of screws to be provided for each vertical member and minimum 2nos. for horizont
member etc. complete as per manufacture specification and direction of Engineer-incharge including conveyance o
all materials, labour charges for fixing, overheads & contractors profit complete for finished item of work.
18 Providing and fixing 30mm thick factory made solid single side prelam panel PVC door shutter consisting
frame made out of MS. Tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, and 15mm x 15mm for to
and bottom rails. The MS frame shall have a coat of steel primers of approved make and manufacture. MS fram
covered with 5mm thick heat moulded “Rajshri” single side Prelam Pac ‘C’ channel of size 30mm x 50mm to form
stiles.5mm thick& 75mm wide single side prelim Pac sheets shall be for the top, bottom and lock rails. Panelling o
5mm thick one side Pac sheet to be fitted in the MS frame and sealed to the front (prelam side) stiles and rai
(which should have a 5mm 45 bent portion as beading) and attached to the back(white/ivory) stiles and rails whic
should have a 10mm 900 bent portion as beading) using 2nos. 15mm wide x 5mm thick Pac sheet beading insid
the 90 bent beading. All stiles, rails and beadings are to be joined to the panel using solvent cement etc. a
additional 5mm thick Pac strip of 20mm width to be stuck on the interior side of the ‘C” channel using Pac solven
cement adhesive and 10mm(5mmX2) thick, 20mm wide cross Pac sheet to be fitted as gap insert for top and bottom
rail etc., complete as per direction of Engineer –in-Charge, manufacture specification and drawing including IS
marked Aluminium fixtures 3 Nos. butt hinges (IS:205) of 150mm long, 1 No. aldrop (IS:2681) 250 mm long, 1 No
tower bolt (IS:204) of 150 mm x 10mm dia, 2 Nos. 125mm long handles (IS:208),1 No. Rubber / Nylon door sto
bushes including labour charges for fixing the shutter to frame etc., including overheads & contractors pro
complete for finished item of work
and SS cover plates with brass pivot and sigle piece MS Sheet outer box with slide plate etc.complete (Weigh
Capacity up to 130 Kgs) as approved by Engineer-in-Charge including supply and fixing ISI marked powder coate
aluminium fixtures of 3 Nos. of butt hinges (IS:205) of 150mm long(for each shutter), 4 Nos.tower bolts 10mm bo
(IS:204) 300mm long , 4 Nos.alluminium handles (IS:208) 150mm dia and 2 Nos. aldrops (IS:2681) 300mm lon
including labour charges for manufacturing door , fixing the door with required No. of screws etc., includin
overheads & contractors profit complete for finished item of work. (The Aluminium section used shall be standar
make confirming to IS 1948 – 1961) and as approved by the Engineer) (2000mm x 2600mm)
(BLD-CSTN-13-31)
Quantity analysis Size : 2.00m x 2.60m 5.20
Outer frame (101.60 x 44.45, 3.18mm thick) 2 x 2.00 + 2 x 2.60 9.20 RM
Mullions (101.60 x 44.45, 3.18mm thick) 1 x 0.50 0.50 RM
9.70 RM
= 9.70 RM @ 2.404 Kgs / RM 23.319
Shutters, styles and rails(47.62mm x 44.45mm ,
3.18 mm thick) 4 x 2.10 + 2 x 2 x 1.00 12.40 RM
= 12.40 RM @1.501 Kgs/ RM 18.612
Bottom rails (114.30 x 44.45. 3.18mm thick) 2 x 1.00 2.00 RM
= 2.00 RM @ 2.646 Kgs / RM 5.292
2 x 2 x 2(1.00+0.50) +
2 x 2 x 2(1.00+1.20) +
Glazing clips 2 x 2 x 2(1.00+0.90) 44.80 RM
= 44.80 RM @ 0.101 Kgs /RM 4.525
51.748
5mm thick plain glass 2 x 1.00 x 0.50 1.00 sqm.
5mm thick ground glass 2 x 1.00 x 1.20 2.40 sqm.
MDF Board: interior-Both Side Laminated -
12 mm thick 2 x 1.00 x 0.90 1.80 sqm.
Rubber beading 2 x 2(1.00+0.50)+2 x 2(1.00+1.20) 14.80 RM
Cost analysis
A.Material :
Cost of powder coated Al. sections 51.748 Kgs. 306.00 1 Kg.
Cost of 5mm thick plain glass 1.00 sqm 474.00 1 sqm
5mm thick ground glass 2.40 sqm 632.00 1 sqm
MDF Board: interior-Both Side Laminated -
12 mm thick 1.80 sqm 700.00 1 sqm
Cost of rubber beading 14.80 RM 2.00 1 RM
Cost of floor springs 2 Nos. 3368.00 Each
Cost of Aluminium butt hinges 150mm long 6 Nos. 133.00 Each
Cost of Al. tower bolts 300mm 4 Nos. 160.00 Each
Cost of Al. round handles 150mm dia. 4 Nos. 100.00 Each
Cost of Al. aldrops 300mm 2 Nos. 342.00 Each
B.Labour charges 5.20 sqm 686.48 1 sqm
Add for Screws, Nails, Nuts, Bolts etc., LS
Rate per 5.20 sqm
Overheads&Contractors Profit @13.615% 0.00000 31945.00
and SS cover plates with brass pivot and sigle piece MS Sheet outer box with slide plate etc.complete( Weigh
Capacity up to 130 Kgs ) as approved by Engineer-in-Charge including supply and fixing ISI marked powde
coated aluminium fixtures of 3 Nos. of butt hinges (IS:205) of 150mm long(for each shutter), 4 Nos.tower bol
10mm bolt (IS:204) 300mm long , 4 Nos.alluminium handles (IS:208) 150mm dia and 2 Nos. aldrops (IS:2681
300mm long including labour charges for manufacturing door , fixing the door with required No. of screws etc
including overheads & contractors profit complete for finished item of work. (The Aluminium section used shall b
standard make confirming to IS 1948 – 1961) and as approved by the Engineer) (1800mm x 2600mm)
(BLD-CSTN-13-31)
Quantity analysis Size : 1.80m x 2.60m 4.68
Outer frame (101.60 x 44.45, 3.18mm thick) 2 x 1.80 + 2 x 2.60 8.80 RM
and SS cover plates with brass pivot and sigle piece MS Sheet outer box with slide plate etc.complete( Weigh
Capacity up to 130 Kgs ) as approved by Engineer-in-Charge including supply and fixing ISI marked powde
coated aluminium fixtures of 3 Nos. of butt hinges (IS:205) of 150mm long(for each shutter), 4 Nos.tower bol
10mm bolt (IS:204) 300mm long , 4 Nos.alluminium handles (IS:208) 150mm dia and 2 Nos. aldrops (IS:2681
300mm long including labour charges for manufacturing door , fixing the door with required No. of screws etc
including overheads & contractors profit complete for finished item of work. (The Aluminium section used shall b
standard make confirming to IS 1948 – 1961) and as approved by the Engineer) (1500mm x 2600mm)
(BLD-CSTN-13-31)
Quantity analysis Size : 1.50m x 2.60m 3.90
Outer frame (101.60 x 44.45, 3.18mm thick) 2 x 1.50 + 2 x 2.60 8.20 RM
Mullions (101.60 x 44.45, 3.18mm thick) 1 x 0.50 0.50 RM
8.70 RM
= 8.70 RM @ 2.404 Kgs / RM 20.915
Shutters, styles and rails(47.62mm x 44.45mm ,
3.18 mm thick) 4 x 2.10 + 2 x 2 x 0.75 11.40 RM
= 11.40 RM @1.501 Kgs/ RM 17.111
Bottom rails (114.30 x 44.45. 3.18mm thick) 2 x 0.75 1.50 RM
= 1.50 RM @ 2.646 Kgs / RM 3.969
2 x 2 x 2(0.75+0.50) +
2 x 2 x 2(0.75+1.20) +
Glazing clips 2 x 2 x 2(0.75+0.90) 38.80 RM
= 38.80 RM @ 0.101 Kgs /RM 3.919
45.914
5mm thick plain glass 2 x 0.75 x 0.50 0.75
5mm thick ground glass 2 x 0.75 x 1.20 1.80
MDF Board: interior-Both Side Laminated -
12 mm thick 2 x 0.75 x 0.90 1.35
Rubber beading 2 x 2(0.75+0.50)+2 x 2(0.75+1.20) 12.80
Cost analysis
A.Material :
Cost of powder coated Al. sections 45.91 Kgs. 306.00 1 Kgs.
Cost of 5mm thick plain glass 0.75 sqm 474.00 1 sqm
5mm thick ground glass 1.80 sqm 632.00 1 sqm
MDF Board: interior-Both Side Laminated -
12 mm thick 1.35 sqm 700.00 1 sqm
Cost of rubber beading 12.80 RM 2.00 1 RM
Cost of floor springs 2 Nos. 3368.00 Each
Cost of Aluminium butt hinges 150mm long 6 Nos. 133.00 Each
Cost of Al. tower bolts 300mm 4 Nos. 160.00 Each
Cost of Al. round handles 150mm dia. 4 Nos. 100.00 Each
Cost of Al. aldrops 300mm 2 Nos. 342.00 Each
B.Labour charges 3.90 sqm 686.48 1 sqm
Add for Screws, Nails, Nuts, Bolts etc., LS
Rate per 3.90 sqm
Overheads&Contractors Profit @13.615% 0.00000 28450.00
23 Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize stee
(base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM). coated wit
Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphat
Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating pain
thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section o
0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam
joints at stile edges, in-fill of honeycomb Kraft paper used to give the required rigidity and effective acoust
insulation with 6” Tower bolt – 2 Nos., 6” D handles – 2 Nos., 10” Aldrops – 1 No., Butt Hinges – 6 Nos, Mortise Loc
of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws includin
overheads and contractor profit etc., complete for finished item of work for Double leaf Door
24 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding doors three track - two glass shutte
sliding and one mesh shutter sliding- 95 -Series duly manufactured using UPVC reinforced profiles of (108 mm x 4
mm)/(95.50 mm x 60 mm) x 2.0 mm for outer frames, (75 mm x 39 mm)/(66 mm x 42 mm) x 2.0 mm for sliding doo
shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 5
microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall b
fitted with 5 mm thick clear float glass of reputed make and mesh shutter shall be made of (48.5 mm x 30 mm))/(5
mm x 26.5 mm) x 2.0 mm UPVC profile section and fitted with nylon/polymer mesh and rollers/pulley duly fixed wit
TPV Gaskets/ EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No
per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, eas
glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges fo
transportation, erection at site with templates for casement sizing, overheads and contractors profit etc., complete fo
finished item of work
26 Providing & Fixing of Openable Windows with Fly-mesh made of pre-painted steel (Base Steel as per IS 513
0.58 mm thick galvanized as per IS 277 with zinc of 150 GSM) primer coated with epoxy primer of 5-7 microns thic
finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer an
the section for outer frame of 72 x 55mm, centre mullion of 72 x 50mm, section for fixed glass beading section of 1
x 12 mm and section for shutters of 48 x 25 mm and outer frame & mullion sections with rebate for glazed shutter
fly mesh and a 20 mm provision for guard bars/grills and fly mesh shutter section of 20 x 40 mm and the sections cu
to length metre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch 2 Nos of heav
duty stainless steel pivot hinges per shutter and panelled with 4mm thick pin headed glass and S.S. Mesh for f
mesh shutter (304 grade), fitted using rubber gaskets including fixing the windows in the concrete/masonry wall b
means of self expanding screws, including 10mm Square guard bars with 6” (152.4mm) pitch including overhead
and contractor profit etc., complete for finished item of work
a Centre fixed both side openable shutter window : 1800mm x1800mm 3.24
Window portion 2.34 sqm 5797.00 1 sqm
Fan light portion 0.90 sqm 4295.00 1 sqm
Rate per 3.24 sqm
Rate per 1 sqm
deduct cost of 5mm plain glass 1.00 sqm 474.00 1 sqm
add cost of 4mm thick pin headed glass 1.00 sqm 280.00 1 sqm
b Centre fixed both side openable shutter window : 1500mm x1800mm 2.70
Window portion 1.95 sqm 6625.00 1 sqm
Fan light portion 0.75 sqm 4295.00 1 sqm
Rate per 2.70 sqm
Rate per 1 sqm
deduct cost of 5mm plain glass 1.00 sqm 474.00 1 sqm
add cost of 4mm thick pin headed glass 1.00 sqm 280.00 1 sqm
c Double shutter window 1200x1800 with fixed fan light of 500mm at top : 2.16
Window portion 1.56 sqm 7288.00 1 sqm
Fan light portion 0.60 sqm 4295.00 1 sqm
Rate per 2.16 sqm
Joinery data 2018-19 - Page : 93
Rate per 1 sqm
deduct cost of 5mm plain glass 1.00 sqm 474.00 1 sqm
add cost of 4mm thick pin headed glass 1.00 sqm 280.00 1 sqm
A) WINDOWS
a Centre fixed both side openable shutter window 1800x1800 with fixed fan light of 500mm
at top : 3.24
Window portion 2.34 sqm 5411.00 1 sqm
Fan light portion 0.90 sqm 4295.00 1 sqm
Rate per 3.24 sqm
Rate per 1 sqm
deduct cost of 5mm plain glass 1.00 sqm 474.00 1 sqm
add cost of 4mm thick pin headed glass 1.00 sqm 280.00 1 sqm
b Centre fixed both side openable shutter window 1500x1800 with fixed fan light of 500mm
at top : 2.70
Window portion 1.95 sqm 5411.00 1 sqm
Fan light portion 0.75 sqm 4295.00 1 sqm
Rate per 2.70 sqm
Rate per 1 sqm
deduct cost of 5mm plain glass 1.00 sqm 474.00 1 sqm
add cost of 4mm thick pin headed glass 1.00 sqm 280.00 1 sqm
c Double shutter window 1200x1800 with fixed fan light of 500mm at top : 2.16
Window portion 1.56 sqm 6074.00 1 sqm
Fan light portion 0.60 sqm 4295.00 1 sqm
Rate per 2.16 sqm
Rate per 1 sqm
deduct cost of 5mm plain glass 1.00 sqm 474.00 1 sqm
add cost of 4mm thick pin headed glass 1.00 sqm 280.00 1 sqm
d Double shutter window 900x1800 with fixed fan light of 500mm at top : 1.62
Window portion 1.17 sqm 6074.00 1 sqm
Fan light portion 0.45 sqm 4295.00 1 sqm
Rate per 1.62 sqm
Rate per 1 sqm
Joinery data 2018-19 - Page : 96
deduct cost of 5mm plain glass 1.00 sqm 474.00 1 sqm
add cost of 4mm thick pin headed glass 1.00 sqm 280.00 1 sqm
B) VENTILATORS :
a Top Hung of any size 1.00 sqm 6295.00 1 sqm
Overheads&Contractors Profit @13.615% 0.00000 6295.00
Rate per 1 sqm
Say
29 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding windows three track - two glas
shutters sliding and one mesh shutter duly manufactured using UPVC reinforced profiles of (94 mm x 45 mm)/(8
mm x 52 mm) x 2.0 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.0 mm for sliding shutter frame
capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns o
minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall be fitted with
mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm)
2 mm fitted with nylon/ polymer mesh on rollers/ pulley duly fixed with TPV Gaskets/ EPDM weathering seal resistan
accessories like locking system 1 No., per set of sashes and the system is to be installed at the site using ancho
fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all material
accessories, labour charges for transportation, erection at site with templates for casement sizing, overheads an
contractors profit etc., complete for finished item of work
30 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) casement windows openable shutters du
manufactured using UPVC reinforced profiles of 60 mm x 55 mm x 2.0 mm for outer frames, 70 mm x 60 mm x 2.
mm for mullion sections for two or more openable shutters 70 mm x 60 mm x 2.0 mm for openable shutter fram
capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns o
minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall be fitted with
mm thick clear float glass of reputed make duly fixed with TPV Gaskets/ EPDM weathering seal resistant an
accessories for casement window - friction stay hinges of stainless steel grade 304- 2 Nos., per sash, handle wit
mazak alloy casting 1 No. per sash, multipoint locking system suitably concealed 1 No., per sash provided with raise
wedges for smooth operation and the system is to be installed at the site using anchor fasteners, silicon rubbe
sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labou
charges for transportation, erection at site with templates for casement sizing, overheads and contractor profit etc
complete for finished item of work
32 Providing, supplying & fixing of Top hung Ventilator With Exhaust Fan Provision made out of mul
chambered uPVC sections with TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour so
PVC and reinforced with Galvanized Iron profiles throughout the window. The outer frame having a overall size o
60mm x 55 mm x 2.40 mm with reinforcement of 1 mm thickness, Mullion with overall size of 74 mm x 60 mm x 2.4
mm with reinforcement of 1 mm thickness and Sash with overall size of 75 mm x 60 mm x 2.40 mm wit
reinforcement of 1.0/1.2 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and no
more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Glazing bead for fixing of glass shall be of size 34
20 mm coextruded with soft PVC gasket. Ventilator shall be provided with 4.5 mm Pin Head glass, standar
hardware, single point locking using cockspur handle and friction stays. Wall thickness of frame, mullion and sas
shall be 2.4 mm.,including cost and conveyance of all materials, accessories, labour charges for transportation
erection at site, overheads and contractor profit etc., complete for finished item of work.
33 Supplying and fixing of 7.5mm thick Aluminium Grill (as approved by the department) 3.58 Kg/Sqm includin
cost and conveyance of all materials, accessories, labour charges for transportation, erection at site, overheads an
contractor profit etc., complete for finished item of work
34 Supplying and fixing of MS Grill to windows / in open court yards using 25mm x 6mm MS flat alround and 10m
MS square bars horizontally at 125mm centre to centre and vertically at 300mm centre to centre including fixing wit
4 Nos of MS Z holdfasts (2 on each side) duly making cutting brick masonry, fixing and making to original surfac
neatly including cost and conveyance of all materials, cutting, bending, welding, operational charges, labour charge
overheads and contractor profit etc., complete for finished item of work.
35 Supplying and fixing of MS doors, grill to windows / in open court yards using MS angles, flat, square ba
including cost and conveyance of all materials, cutting, bending, welding, all operational charges, labour charge
overheads and contractor profit etc., complete for finished item of work.
36 Providing and fixing pre-painted steel sliding window 2-Track with Two sliding shutters.
Providing and fixing pre-painted steel sliding window 2-Track-2 panel sliding window fabricated from Roll-forme
sections made of Galvanized steel colour coated/powder coated(Base Steel as per IS 513’D’ quality, Galvanized a
per IS-277 with Zinc of 120GM/Sq.mtr) with total coated thickness of 0.58mm. Primer coat with apoxy primer of 5-
microns thick, finish painted with a polyester paint of 12-16 microns thick and back-coated with Alkyd backer of 5-
microns or powder coated with pure polyester powder upto 50-60 microns thick. Section for external frame should b
of 59x44 mm, section for shutter should be of 35x55 mm. The windows should be panelled with 5mm thick plan
float glass. Corner bracket for internal and external frame made of glass filled Nylon. Gaskets are to be made o
Ethyl Propylene Diamine Monomer(EPDM) inclusive of conveyance of all materials accessories, labour charges, an
erection at site including overheads & contractors profit etc., complete finished item of work.
The sections are to be cut to length, joined and assembled by means of corner bracket. The above frames should b
fixed to the concrete/masonry walls by means of self-expanding brackets & screws including 10mm square guar
bars with 6” pitch (152.40mm) complete for finished item of work.
The Window/Door to be panelled with 5mm thick plain float glass. The gaskets are to be made of Ethyl Propylen
[EPDM]. Corner Brackets for internal and external frame to be made of glass filled nylon. Touch lock to be provide
for Window Shutter. Sections are to be cut to length, joined and assembled by means of corner brackets. The abov
frame to be fixed to Brick/Concrete masonry by using Nylon self-expanding caps and driving MS electroplated 80mm
screws into the caps through frames. The Grill for safety for windows to be made of 10mm thick square rod bars wit
152mm pitch for complete item of work . For Door there will be no Safety Grillincluding cost and conveyance of a
materials, accessories, labour charges for transportation, erection at site, overheads and contractor profit etc
complete for finished item of work.
38 Supply and fixing powder coated alimunium fully glazed 2 shutter windows with fixed panel in betwee
openable shutters as per approved drawings using anodized aluminium sections of 38.50mm x 33mm , 3mm thic
for outer frame, 59mm(3mm) x 33mm(2.5mm) x 30mm(3mm) for mullions and 38.5mm x 33mm , 3mm thick fo
shutter frame , powder coating of alluminium sections 25mm microns thick and fixing 5 mm thick plain glass fitte
with suitable aluminium galzing clips and rubber beading including supplying and fixing powder coated aluminium
adjustable frictional stay hinges (2 Nos. per shutter), handle with lock (1 No. per shutter) including cost an
conveyance to site of powder coated aluminium sections, glass, rubber beading, fixtures etc., including labou
charges for manufacturing window, fixing in position using wooden blocks and sheet metal screws, etc., complete fo
finished item of work in all floors. (The aluminium sections used shall be standard make confirming to IS 1948-196
and as approved by the Engineer and fixtures shall be of ISI marked) (1800mm x 1300mm).
40 Supplying and fixing powder coated aluminium three track sliding window as per the approved drawing with a
required accessories such as stoppers, bolts, weather stripping etc with top and sides section of window of siz
92mm x 31.5mm x 1.50mm thick, sloping outward for for drainage, fixed and sliding shutters with bottom, sides an
top section of 40mm x 18mm x 1.50mm thick, interlocking section 40mm x 28mm x 18mm x 1.50mm thick inte
locked for weather scaling and mounted on nylon rollers of lift type and fixing 4mm pin headed glass for shutter
fitted with aluminium glazing clips and SS 20 gauge mesh with shutter frame for bottom, sides and top with section o
size 40mm x 18mm x 1.50mm thick, inter locking section 40mm x 28mm x 18mm x 1.50mm thick inter locked fo
weather scaling and mounted on nylon rollers of lift type fitted with nylon/polymer mesh on rollers/pulley duly fixe
with TPV gaskets / EPDM weather seal resistant accessories like locking system 1 No. per set of sashes and th
system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site etc
including fixing of 100mm long Aluminium handle to each shutter, cost and conveyance to site of powder coate
aluminium sections, glass, rubber beading , fixtures etc., including labour charges for manufacturing window, fixing
position using wooden blocks and sheet metal screws, overheads & contractors profit etc., complete for finished item
of work. (The aluminium sections used shall be standard make confirming to IS 1948-1961 and as approved by th
Engineer and fixtures shall be of ISI marked) (1200mm x 1200mm)
Cost analysis
A.Material :
Cost of powder coated Al. sections 11.686 Kgs. 306.00 1 Kgs.
Cost of 4mm thick pin headed glass 1.44 sqm. 280.00 1 sqm.
Cost of rubber beading 3.60 RM 2.00 1 RM
Cost of aluminium handles 100mm long 3 Nos 68.00 1 Each
Cost of SS mesh(BMT-F.19) 0.78 sqm. 446.00 1 sqm.
B.Labour charges 1.44 sqm 720.47 1 sqm
Add for screws, nails, nuts, bolts, nylon rollers
etc., LS
Rate per 1.44 Sqm:
Overheads&Contractors Profit @13.615% 0.13615 5585.00
41 Supplying and fixing powder coated aluminium three track sliding window with fixed fan light of 500mm a
top as per the approved drawing with all required accessories such as stoppers, bolts, weather stripping etc with to
and sides section of window of size 92mm x 31.5mm x 1.50mm thick, sloping outward for for drainage, fixed an
sliding shutters with bottom, sides and top section of 40mm x 18mm x 1.50mm thick, interlocking section 40mm
28mm x 18mm x 1.50mm thick inter locked for weather scaling and mounted on nylon rollers of lift type and fixin
4mm pin headed glass in fan light and for shutters fitted with aluminium glazing clips and SS 20 gauge mesh wit
shutter frame for bottom, sides and top with section of size 40mm x 18mm x 1.50mm thick, inter locking sectio
40mm x 28mm x 18mm x 1.50mm thick inter locked for weather scaling and mounted on nylon rollers of lift type fitte
with nylon/polymer mesh on rollers/pulley duly fixed with TPV gaskets / EPDM weather seal resistant accessorie
like locking system 1 No. per set of sashes and the system is to be installed at the site using anchor fastener
silicon rubber sealant, easy glazing/deglazing at site etc., and fan light top and side section of size 63.50mm
38.10mm, 1.53mm thick, powder coating of all Aluminium sections 25 microns thick including fixing of 100mm lon
Aluminium handle to each shutter, cost and conveyance to site of powder coated aluminium sections, glass, rubbe
beading , fixtures etc., including labour charges for manufacturing window, fixing in position using wooden blocks an
sheet metal screws, overheads & contractors profit etc., complete for finished item of work. (The aluminium section
used shall be standard make confirming to IS 1948-1961 and as approved by the Engineer and fixtures shall be o
ISI marked) (1500mm x 1700mm)
Cost analysis
Joinery data 2018-19 - Page : 105
A.Material :
Cost of powder coated Al. sections 16.433 Kgs. 306.00 1 Kgs.
Cost of 4mm thick pin headed glass 2.55 sqm. 280.00 1 sqm.
Cost of rubber beading 8.10 RM 2.00 1 RM
Cost of aluminium handles 100mm long 3 Nos 68.00 1 Each
Cost of SS mesh(BMT-F.19) 0.72 sqm. 446.00 1 sqm.
B.Labour charges 2.55 sqm 720.47 1 sqm
Add for screws, nails, nuts, bolts, nylon rollers
etc., LS
Rate per 2.55 Sqm:
Overheads&Contractors Profit @13.615% 0.13615 8130.00
alluminium glazing clips and rubber beading including cost and conveyance to site of powder coated aluminium
sections, glass, rubber beading, fixtures etc., including labour charges for manufacturing window, fixing in positio
using wooden blocks and sheet metal screws, overheads & contractors profit etc., complete for finished item of wor
(The aluminium sections used shall be standard make confirming to IS 1948-1961 and as approved by the Enginee
and fixtures shall be of ISI marked) ( 1800mm x 1800mm )
Cost analysis
A.Material :
Cost of powder coated Al. sections 16.654 Kgs. 306.00 1 Kgs.
Cost of 5mm thick plain glass 3.24 sqm 474.00 1 sqm
Cost of rubber beading 9.00 RM 2.00 1 RM
B.Labour charges 3.24 sqm 720.47 1 sqm
Add for Screws, Nails, Nuts, Bolts etc., LS
Rate per 3.24 sqm
Overheads&Contractors Profit @13.615% 0.00000 8991.40
rubber beading , fixtures etc., including labour charges for manufacturing window, fixing in position using woode
blocks and sheet metal screws, overheads & contractors profit etc., complete for finished item of work. (Th
aluminium sections used shall be standard make confirming to IS 1948-1961 and as approved by the Engineer an
fixtures shall be of ISI marked) (1200mm x 1800mm)
Cost analysis
A.Material :
Cost of powder coated Al. sections 12.10 Kgs. 306.00 1 Kgs.
Cost of 5mm thick plain glass 2.16 sqm 474.00 1 sqm
Cost of rubber beading 6.00 RM 2.00 1 RM
B.Labour charges 2.16 sqm 720.47 1 sqm
Add for Screws, Nails, Nuts, Bolts etc., LS
Rate per 2.16 sqm
Overheads&Contractors Profit @13.615% 0.00000 6296.03
44 Supply and fixing of cement bonded pre-laminated particle boards aluminum glazed partitions using 10m
cement bonded pre-laminated particle boards and 5.00 mm thick plain glass to full height. Using with LAM to a heigh
of 0.91 meter at bottom panel and remaining height with glass and aluminum sections anodized to 12 to 15 micron
and of sections of size 37mm x 62mm and 1.5mm thickness with one meter centre to centre duly fixed with cl
beading on both sides including fixing the frame to pillars by M.S. flats, bolts and nuts including cost and conveyanc
of all materials etc., complete as directed during execution and overheads & contractors profit etc., complete fo
finished item of work
2920.50
5451.60
3520.00
11892.10
80.89
75.34
679.68
6.80
686.48
78.64
73.25
713.34
7.13
720.47
35.39
43.99
803.39
8.03
811.43
Joinery data 2018-19 - Page : 111
windows ( S.No.9 of Page No. 394 of SoR 2011-12 )
55.00
132.00
55.00
55.00
120.00
50.00
116.75
81.60
76.00
741.35
7.41
748.76
Joinery data 2018-19 - Page : 112
oor cum fixed window as per approved drawing with best teak wood
ed fan light of 500mm at top and fixed panels of 600mm width at sides
n glass using 12mm x 12mm teak wood beading and fixing ornamental
he approved drawing in fan light portion and fixed panels and 1st class
section 120mm x 35mm, bottom rail of size 150mm x 35mm and 12mm
ental etching including cost and
hutters, glass including supply and fixing 6 Nos MS Zhold fasts of size
SI marked brass fixtures of 8 Nos butt hinges(IS:205) 250mm long , 1
wer bolts- 10mm (IS:204) of 200 mm long , 2 Nos 450 mm long fancy
ber / Nylon door stop bushes including fixing the fixtures to door with
cluding labour charges for fixing the frame in position, fixing the shutters
etc., including overheads & contractors profit complete for finished item
tical frame of door shall be embedded in flooring for a depth of not less
sqm
30151.28
14517.50
5527.50
3764.88
977.60
4400.00
2768.00
2982.00
951.00
336.00
192.00
18.00
6988.34
4155.10
1038.77
2230.80
557.70
3609.90
902.48
1.16
Joinery data 2018-19 - Page : 113
86070.00
11034.62
0.00
11034.62
11035
Joinery data 2018-19 - Page : 114
de of 25mm x 5mm MS flats for fixing in fan light portion and side fixed
pproved drawing including cutting the flat to required length, welding,
cost and conveyance of all materials, labour charges etc., complete for
Sqm
Kgs
211.68
136.08
25.20
19.91
11.70
404.57
1738.39
84.70
115.50
215.60
3.31
83.60
502.71
Joinery data 2018-19 - Page : 115
d drawings with best teak wood frame of section 100mm x 65 mm with
h 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading
SI marked flush door shutter of 35mm thick double shutters with bond
ss bands and face veneers, hot pressed bonded with water proof phenol
conforming to IS 2202-1991 (Part-I) both sides commercial ply with
sqm
cum
cum
cum
sqm
RM
sqm
Kgs
4428.71
3586.46
280.00
156.00
5277.73
192.00
634.00
231.00
1944.00
1087.00
568.00
336.00
18.00
131.88
751.34
187.84
1491.79
372.95
286.00
71.50
2.81
22035.00
0.00
22035.00
4237.50
4237
Joinery data 2018-19 - Page : 116
ed drawings with medium teak wood frame of section 100mm x 65 mm
xed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood
ars and ISI marked flush door shutter of 30mm thick double shutters
having cross bands and face veneers, hot pressed bonded with water
actory made conforming to IS 2202-1991 (Part-I) both sides commercial
sqm
cum
cum
cum
sqm
RM
sqm
Kgs
2684.07
1897.35
252.00
145.60
4168.06
192.00
228.00
798.00
342.00
228.00
106.00
18.00
118.69
720.42
180.11
1334.76
333.69
257.40
64.35
1.51
14070.00
0.00
14070.00
3006.41
3006
Joinery data 2018-19 - Page : 117
ed drawings with medium teak wood frame of section 100mm x 65 mm
top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak
quare bars and ISI marked flush door shutter of 30mm thick double
ype core having cross bands and face veneers, hot pressed bonded with
c resin factory made conforming to IS 2202-1991 (Part-I) both sides
es,
sqm
cum
cum
cum
sqm
RM
sqm
Kgs
2684.07
1619.69
252.00
218.40
3432.52
192.00
228.00
798.00
342.00
228.00
106.00
18.00
98.91
674.04
168.51
1099.21
274.80
257.40
64.35
4.10
12760.00
0.00
12760.00
3271.80
3272
Joinery data 2018-19 - Page : 118
ed drawings with medium teak wood frame of section 100mm x 65 mm
top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak
quare bars and ISI marked flush door shutter of 30mm thick double
ype core having cross bands and face veneers, hot pressed bonded with
c resin factory made conforming to IS 2202-1991 (Part-I) both sides
es,
sqm
cum
cum
cum
sqm
RM
sqm
Kgs
2684.07
1342.03
201.60
187.20
2696.98
192.00
228.00
798.00
342.00
228.00
106.00
18.00
79.13
627.67
156.92
863.67
215.92
205.92
51.48
0.44
11225.00
0.00
11225.00
3597.76
3598
Joinery data 2018-19 - Page : 119
ed drawings with medium teak wood frame of section 100mm x 65 mm
top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak
Square bars and ISI marked flush door shutter of 30mm thick single
pe core having cross bands and face veneers, hot pressed bonded with
c resin factory made conforming to IS 2202-1991 (Part-I) both sides
ides including cost and conveyance to site of teak wood frame, flush
sqm
cum
cum
cum
sqm
RM
sqm
Kgs
2684.07
925.54
168.00
83.20
2206.62
192.00
114.00
399.00
342.00
228.00
53.00
9.00
65.94
558.10
139.52
706.64
176.66
171.60
42.90
4.22
9270.00
0.00
9270.00
3565.38
3565
Joinery data 2018-19 - Page : 120
ed drawings with medium teak wood frame of section 100mm x 65 mm
top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak
Square bars and ISI marked flush door shutter of 30mm thick single
pe core having cross bands and face veneers, hot pressed bonded with
c resin factory made conforming to IS 2202-1991 (Part-I) both sides
ides including cost and conveyance to site of teak wood frame, flush
sqm
cum
cum
cum
sqm
RM
sqm
Kgs
2684.07
832.98
151.20
78.00
1961.44
192.00
114.00
399.00
342.00
228.00
53.00
9.00
59.35
542.64
135.66
628.12
157.03
154.44
38.61
4.47
8765.00
0.00
8765.00
3745.73
3746
Joinery data 2018-19 - Page : 121
with medium teak wood frame of section 100mm x 65 mm and ISI
double shutters with bond wood solid block board type Core having
d bonded with water proof phenol formaldehyde synthetic resin factory
oth sides commercial ply with internal lipping on all sides including cost
flush shutter including
Sqm
cum
cum
cum
sqm
2169.88
925.54
4658.42
192.00
228.00
798.00
342.00
228.00
106.00
18.00
480.80
120.20
1491.79
372.95
3.44
12135.00
2889.29
0.00
2889.29
2889
Joinery data 2018-19 - Page : 122
with medium teak wood frame of section 100mm x 65 mm and ISI
double shutters with bond wood solid block board type Core having
d bonded with water proof phenol formaldehyde synthetic resin factory
oth sides commercial ply with internal lipping on all sides including cost
flush shutter including
sqm
cum
cum
cum
sqm
2169.88
832.98
4168.06
192.00
228.00
798.00
342.00
228.00
106.00
18.00
465.34
116.33
1334.76
333.69
1.96
11335.00
2998.68
0.00
2998.68
2999
Joinery data 2018-19 - Page : 123
with medium teak wood frame of section 100mm x 65 mm and ISI
double shutters with bond wood solid block board type Core having
d bonded with water proof phenol formaldehyde synthetic resin factory
oth sides commercial ply with internal lipping on all sides including cost
flush shutter including
sqm
cum
cum
cum
sqm
2169.88
694.15
3432.52
192.00
228.00
798.00
342.00
228.00
106.00
18.00
442.15
110.54
1099.21
274.80
4.75
10140.00
3219.05
0.00
3219.05
3219
Joinery data 2018-19 - Page : 124
with medium teak wood frame of section 100mm x 65 mm and ISI
k double shutters with bond wood solid block board type Core having
d bonded with water proof phenol formaldehyde synthetic resin factory
oth sides commercial ply with internal lipping on all sides including cost
flush shutter including
sqm
cum
cum
cum
sqm
2169.88
555.32
2696.98
192.00
228.00
798.00
342.00
228.00
106.00
18.00
418.96
104.74
863.67
215.92
2.54
8940.00
3547.62
0.00
3547.62
3548
Joinery data 2018-19 - Page : 125
with medium teak wood frame of section 100mm x 65 mm and ISI
single shutter with bond wood solid block board type Core having cross
ed with water proof phenol formaldehyde synthetic resin factory made
des commercial ply with internal lipping on all sides including cost and
h shutter including supply and
sqm
cum
cum
cum
sqm
2169.88
462.77
2206.62
192.00
114.00
399.00
342.00
228.00
53.00
9.00
403.50
100.87
706.64
176.66
1.07
7565.00
0.00
7565.00
3602.38
3602
Joinery data 2018-19 - Page : 126
with medium teak wood frame of section 100mm x 65 mm and ISI
single shutter with bond wood solid block board type Core having cross
ed with water proof phenol formaldehyde synthetic resin factory made
des commercial ply with internal lipping on all sides including cost and
h shutter including supply and
sqm
cum
cum
cum
sqm
2169.88
416.49
1961.44
192.00
114.00
399.00
342.00
228.00
53.00
9.00
395.77
98.94
628.12
157.03
0.33
7165.00
0.00
7165.00
3791.01
3791
Joinery data 2018-19 - Page : 127
s with medium teak wood frame of section 100mm x 65mm and ISI
ngle shutter with bond wood solid block board type Core having cross
ed with water proof phenol formaldehyde synthetic resin factory made
des commercial ply with internal lipping on all sides including cost and
oor frame, flush shutter, including suply and fixing 6 Nos. MS Z hold
ng ISI marked Aluminium fixtures 3 Nos. butt hinges (IS:205) of 150mm
m dia, 2 Nos. 125mm long handles (IS:208),1 No. Rubber / Nylon door
50mm thick to the flush doors shutters pasted with Fevicol complete as
ufacturers specification and drawing to full height of the shutter inside
e in position, fixing the shutter to the frame etc., including overheads &
of work as per APSS 1001 & 1002. (The vertical frame of door shall be
n 10mm) (800mm x 2100mm)
sqm
cum
cum
cum
sqm
2169.88
370.21
1716.26
192.00
93.00
399.00
315.00
102.00
9.00
388.04
97.01
549.61
137.40
522.34
4.25
7065.00
0.00
7065.00
4205.36
4205
Joinery data 2018-19 - Page : 128
s with medium teak wood frame of section 100mm x 65mm and ISI
ngle shutter with bond wood solid block board type Core having cross
ed with water proof phenol formaldehyde synthetic resin factory made
des commercial ply with internal lipping on all sides including cost and
oor frame, flush shutter, including suply and fixing 6 Nos. MS Z hold
ng ISI marked Aluminium fixtures 3 Nos. butt hinges (IS:205) of 150mm
m dia, 2 Nos. 125mm long handles (IS:208),1 No. Rubber / Nylon door
50mm thick to the flush doors shutters pasted with Fevicol complete as
ufacturers specification and drawing to full height of the shutter inside
e in position, fixing the shutter to the frame etc., including overheads &
of work as per APSS 1001 & 1002. (The vertical frame of door shall be
n 10mm) (750mm x 2100mm)
sqm
cum
cum
cum
sqm
2169.88
347.43
1594.27
192.00
93.00
399.00
315.00
102.00
9.00
384.23
96.06
510.54
127.63
485.21
1.60
6826.86
0.00
6826.86
4334.51
4335
solid panel PVC door frame (Choukhat): Providing and fixing factory
the size 50x7 mm with a wall thickness of 5mm, made out of extruded
ter cut at two corners and joined with 2 Nos. of 150mm long brackets of
door profiles are to be reinforced with 19 x 19mm MS. square tube of 19
wall using 65/100mm long MS. Screws through the frame by using Pac
be provided for each vertical member and minimum 2nos. for horizontal
specification and direction of Engineer-incharge including conveyance of
eads & contractors profit complete for finished item of work.
303.00
Joinery data 2018-19 - Page : 129
0.00
303.00
303
made solid single side prelam panel PVC door shutter consisting of
hickness and size of 19mm x 19mm for stiles, and 15mm x 15mm for top
a coat of steel primers of approved make and manufacture. MS frame
shri” single side Prelam Pac ‘C’ channel of size 30mm x 50mm to form
elim Pac sheets shall be for the top, bottom and lock rails. Panelling of
in the MS frame and sealed to the front (prelam side) stiles and rails
as beading) and attached to the back(white/ivory) stiles and rails which
eading) using 2nos. 15mm wide x 5mm thick Pac sheet beading inside
beadings are to be joined to the panel using solvent cement etc. an
th to be stuck on the interior side of the ‘C” channel using Pac solvent
20mm wide cross Pac sheet to be fitted as gap insert for top and bottom
neer –in-Charge, manufacture specification and drawing including ISI
es (IS:205) of 150mm long, 1 No. aldrop (IS:2681) 250 mm long, 1 No.
2 Nos. 125mm long handles (IS:208),1 No. Rubber / Nylon door stop
g the shutter to frame etc., including overheads & contractors profit
sqm
2903.27
93.00
399.00
315.00
102.00
9.00
510.54
127.63
0.55
4460.00
0.00
4460.00
2831.74
2832
Joinery data 2018-19 - Page : 130
nium fully glazed swing door as per the approved drawing with fixed
ng aluminium sections of 101.60 mmm x 44.45mm , 3.18 mm thick for
and middle rail of 47.62mm x 44.45mm , 3.18 mm thick and bottom rail
owder coating of alluminium sections 25mm microns thick, 5 mm thick
m glazing clips and rubber beading in fan light portion, double shutters
ss in the top half and MDF Board: interior-Both Side Laminated -12
itable aluminium glazing clips and rubber beading,shutters mounted on
oved brand manufacture IS : 6315 marked , Hardwyn make M-3000 for
red , embedding in floors
sqm
Kgs.
Kgs.
Kgs.
Kgs.
Kgs.
15834.89
474.00
1516.80
1260.00
29.60
6736.00
798.00
640.00
400.00
684.00
3569.70
2.01
31945.00
0.00
31945.00
6143.27
Joinery data 2018-19 - Page : 131
6143
Joinery data 2018-19 - Page : 132
nium fully glazed swing door as per the approved drawing with fixed
ng aluminium sections of 101.60 mmm x 44.45mm , 3.18 mm thick for
and middle rail of 47.62mm x 44.45mm , 3.18 mm thick and bottom rail
owder coating of alluminium sections 25mm microns thick, 5 mm thick
m glazing clips and rubber beading in fan light portion, double shutters
ss in the top half and MDF Board: interior-Both Side Laminated -12
itable aluminium glazing clips and rubber beading,shutters mounted on
oved brand manufacture IS : 6315 marked , Hardwyn make M-3000 for
red , embedding in floors
sigle piece MS Sheet outer box with slide plate etc.complete( Weight
Engineer-in-Charge including supply and fixing ISI marked powder
tt hinges (IS:205) of 150mm long(for each shutter), 4 Nos.tower bolts
lluminium handles (IS:208) 150mm dia and 2 Nos. aldrops (IS:2681)
manufacturing door , fixing the door with required No. of screws etc.,
mplete for finished item of work. (The Aluminium section used shall be
) and as approved by the Engineer) (1800mm x 2600mm)
sqm
Kgs.
Kgs.
Kgs.
Kgs.
Kgs.
15120.68
426.60
1365.12
1134.00
28.00
6736.00
798.00
640.00
400.00
684.00
3212.73
4.87
30550.00
0.00
30550.00
6527.78
Joinery data 2018-19 - Page : 133
6528
Joinery data 2018-19 - Page : 134
nium fully glazed swing door as per the approved drawing with fixed
ng aluminium sections of 101.60 mmm x 44.45mm , 3.18 mm thick for
and middle rail of 47.62mm x 44.45mm , 3.18 mm thick and bottom rail
owder coating of alluminium sections 25mm microns thick, 5 mm thick
m glazing clips and rubber beading in fan light portion, double shutters
ss in the top half and MDF Board: interior-Both Side Laminated -12
itable aluminium glazing clips and rubber beading,shutters mounted on
oved brand manufacture IS : 6315 marked , Hardwyn make M-3000 for
red , embedding in floors
sigle piece MS Sheet outer box with slide plate etc.complete( Weight
Engineer-in-Charge including supply and fixing ISI marked powder
tt hinges (IS:205) of 150mm long(for each shutter), 4 Nos.tower bolts
lluminium handles (IS:208) 150mm dia and 2 Nos. aldrops (IS:2681)
manufacturing door , fixing the door with required No. of screws etc.,
mplete for finished item of work. (The Aluminium section used shall be
) and as approved by the Engineer) (1500mm x 2600mm)
sqm
Kgs.
Kgs.
Kgs.
Kgs.
Kgs.
sqm.
sqm.
sqm.
RM
14049.68
355.50
1137.60
945.00
25.60
6736.00
798.00
640.00
400.00
684.00
2677.27
1.34
28450.00
0.00
28450.00
7294.87
7295
Joinery data 2018-19 - Page : 135
Joinery data 2018-19 - Page : 136
with metal door frames and door shutters made of galvanize steel
D quality, galvanized as per IS 277 with Zinc of 120 GSM)coated with
t on site or finished with Thermosetting Polyurethane paint of Aliphatic
stance and durability/Epoxy polyester powder for powder coating paint
) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of
ed (roll formed) for 46mm thick fully flush, double skin door shell seam
Kraft paper used to give the required rigidity and effective acoustic
andles – 2 Nos., 10” Aldrops – 1 No., Butt Hinges – 3 Nos, Mortise Lock
he concrete/masonry wall by means of self expanding screws including
e for finished item of work for Single leaf Door
9348.00
0.00
9348.00
9348
with metal door frames and door shutters made of galvanize steel
D quality, galvanized as per IS 277 with Zinc of 120 GSM). coated with
t on site or finished with Thermosetting Polyurethane paint of Aliphatic
stance and durability/Epoxy polyester powder for powder coating paint
) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of
ed (roll formed) for 46mm thick fully flush, double skin door shell seam
Kraft paper used to give the required rigidity and effective acoustic
andles – 2 Nos., 10” Aldrops – 1 No., Butt Hinges – 6 Nos, Mortise Lock
he concrete/masonry wall by means of self expanding screws including
e for finished item of work for Double leaf Door
9971.00
0.00
9971.00
9971
y Vinyl Chloride (UPVC) sliding doors three track - two glass shutters
ries duly manufactured using UPVC reinforced profiles of (108 mm x 45
er frames, (75 mm x 39 mm)/(66 mm x 42 mm) x 2.0 mm for sliding door
glazing system, structurally reinforced with hot dip galvanized up to 50
refabricated & welded through fusion welding the window sash shall be
uted make and mesh shutter shall be made of (48.5 mm x 30 mm))/(50
tion and fitted with nylon/polymer mesh and rollers/pulley duly fixed with
ant accessories like clipping locking system made of aluminium 1 No.,
nstalled at the site using anchor fasteners, silicon rubber sealant, easy
ost and conveyance of all materials, accessories, labour charges for
s for casement sizing, overheads and contractors profit etc., complete for
6746.00
0.00
6746.00
6746
Joinery data 2018-19 - Page : 137
ly Vinyl Chloride (UPVC) openable doors with openable shutters duly
s of 60 mm x 55 mm x 2.0 mm for outer frames, 70 mm x 60 mm x 2.25
nd 102 mm x 60 mm x 2.0 mm for openable shutter frame capable of
einforced with hot dip galvanized up to 50 microns of minimum thickness
usion welding the window sash shall be fitted with 5 mm thick clear float
Gaskets/ EPDM weathering seal resistant and accessories for openable
3 Nos., per shutter handle with mazak alloy casting 1 No. per shutter,
h raiser wedges for smooth operation and the system is to be installed at
bber sealant, easy glazing/ deglazing at site etc., including cost and
labour charges for transportation, erection at site with templates for
profit etc., complete for finished item of work
7646.00
0.00
7646.00
7646
sqm
13564.98
3865.50
17430.48
5379.78
-474.00
280.00
5185.78
0.00
5185.78
5186
sqm
12918.75
3221.25
16140.00
5977.78
-474.00
280.00
5783.78
0.00
5783.78
5784
sqm
11369.28
2577.00
13946.28
Joinery data 2018-19 - Page : 138
6456.61
-474.00
280.00
6262.61
0.00
6262.61
6263
Joinery data 2018-19 - Page : 139
sqm
8526.96
1932.75
10459.71
6456.61
-474.00
280.00
6262.61
0.00
6262.61
6263
sqm
13564.98
5797.00
-474.00
280.00
5603.00
0.00
5603.00
5603
sqm
12918.75
6625.00
-474.00
280.00
6431.00
0.00
6431.00
6431
sqm
11369.28
7288.00
-474.00
280.00
7094.00
0.00
7094.00
7094
sqm
8526.96
7288.00
-474.00
280.00
7094.00
0.00
7094.00
7094
Joinery data 2018-19 - Page : 140
windows & top hung and fixed louvered ventilators made of pre -
-0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120
-7 microns thick, finish painted with a polyester paint of 12-16 microns
k alkyd backer, section for outer frame of 46 x 52 mm section and for
x 70 mm, and section for beading should be 18 x 25 mm and section for
on and the windows panelled with 4 mm thick pin headed glass & 4 mm
ylene Diamine monomer Gasket (EPDM) and the sections cut to length
ullions fixed using mullion cap and with handle made of high grade
er, corner brackets made of CRCA with Zinc Phosphate, Mullion caps
he concrete /masonry wall by means of self expanding screws including
uding overheads & contractors profit etc., complete for finished item of
sqm
12661.74
3865.50
16527.24
5101.00
-474.00
280.00
4907.00
0.00
4907.00
4907
sqm
10551.45
3221.25
13772.70
5101.00
-474.00
280.00
4907.00
0.00
4907.00
4907
sqm
9475.44
2577.00
12052.44
5579.83
-474.00
280.00
5385.83
0.00
5385.83
5386
sqm
7106.58
1932.75
9039.33
5579.83
Joinery data 2018-19 - Page : 141
-474.00
280.00
5385.83
0.00
5385.83
5386
Joinery data 2018-19 - Page : 142
5411.00
-474.00
280.00
5217.00
0.00
5217.00
5217
5411.00
-474.00
280.00
5217.00
0.00
5217.00
5217
6074.00
-474.00
280.00
5880.00
0.00
5880.00
5880
6074.00
-474.00
280.00
5880.00
0.00
5880.00
5880
6295.00
0.00
6295.00
6295
4306.00
0.00
4306.00
4306
Joinery data 2018-19 - Page : 143
oly Vinyl Chloride (UPVC) sliding windows two track sliding duly
s of (62 mm x 60 mm)/(60 mm x 45 mm) x 2.0 mm for outer frames, (66
m for sliding shutter frames capable of mounting single glazing system,
ed up to 50 microns of minimum thickness of 1.2 mm prefabricated &
ash shall be fitted with 5 mm thick clear float glass of reputed make duly
seal resistant accessories like locking system 1 No., per set of sashes
using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at
all materials, accessories, labour charges for transportation, erection at
heads and contractors profit etc., complete for finished item of work
5410.00
0.00
5410.00
5410
oly Vinyl Chloride (UPVC) sliding windows three track - two glass
manufactured using UPVC reinforced profiles of (94 mm x 45 mm)/(80
58 mm x 39 mm)/(54 mm x 38 mm) x 2.0 mm for sliding shutter frames
m structurally reinforced with hot dip galvanized up to 50 microns of
& welded through fusion welding the window sash shall be fitted with 5
nd mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x
ers/ pulley duly fixed with TPV Gaskets/ EPDM weathering seal resistant
set of sashes and the system is to be installed at the site using anchor
ng/ deglazing at site etc., including cost and conveyance of all materials,
on, erection at site with templates for casement sizing, overheads and
item of work
6067.00
0.00
6067.00
6067
6410.00
0.00
6410.00
6410
Joinery data 2018-19 - Page : 144
uvered Ventilator made out of multi chambered uPVC sections with
Grey colour soft PVC. having isolated drainage and reinforced with
dow. The outer frame having an overall size of 60 mm x 55 mm x 2.40
ullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement
hall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR
n).Ventilator shall be provided with 4.5 mm Pin Head glass, standard
on shall be 2.4 mm.,including cost and conveyance of all materials,
on, erection at site, overheads and contractor profit etc., complete for
6005.00
0.00
6005.00
6005
8450.00
0.00
8450.00
8450
941.00
0.00
941.00
941
ws / in open court yards using 25mm x 6mm MS flat alround and 10mm
e to centre and vertically at 300mm centre to centre including fixing with
duly making cutting brick masonry, fixing and making to original surface
materials, cutting, bending, welding, operational charges, labour charges,
e for finished item of work.
Kgs
Kgs
Kgs
1107.79
352.80
Joinery data 2018-19 - Page : 145
128.00
938.95
173.88
137.37
2838.79
927.71
0.00
927.71
928
44.10
27.00
5.00
3.95
80.05
0.00
80.05
80
6166.00
0.00
6166.00
6166
Joinery data 2018-19 - Page : 146
Pre painted Steel sliding Window/Door fabricated from roll formed
ated /powder coated (Base Steel as per IS 513 ‘D’ quality galvanized as
h total coated thickness of 0.58mm. Primer Coat with epoxy primer of 5-
er paint of 12-16 microns thick and back coated with Alkyd backer of 5-7
ster powder up to 50-60 microns thick. The External Section for Three
4 x 107mm with a provision for bottom track nsert profile of 10x9 mm
ass shutter should be of 35x49mm , Section for Window Euro groove
accommodate standard accessories, and section for window lap strip
ion for Mesh Shutter should be of 35x49mm. Section for Door shutter
Euro Groove 25x31mm made of plastic to accommodate standard
f 39x41mm.
thick plain float glass. The gaskets are to be made of Ethyl Propylene
ternal frame to be made of glass filled nylon. Touch lock to be provided
o length, joined and assembled by means of corner brackets. The above
by using Nylon self-expanding caps and driving MS electroplated 80mm
ill for safety for windows to be made of 10mm thick square rod bars with
r Door there will be no Safety Grillincluding cost and conveyance of all
transportation, erection at site, overheads and contractor profit etc.,
6818.00
0.00
6818.00
6818
sqm
5030.64
1109.16
22.80
364.00
150.00
1752.11
6.95
8435.66
Joinery data 2018-19 - Page : 147
0.00
8435.66
3604.98
3605
Joinery data 2018-19 - Page : 148
um fully glazed top hung ventilators fixed with 5mm thick plain glass
rubber beading as per approved drawings using anodized aluminium
r outer frame, 59mm(3mm) x 33mm(2.5mm) x 30mm(3mm) for mullions
m thick,powder coating of all alluminium sections 25mm microns thick,
owder coated aluminium sections, glass, rubber beading, fixtures etc.,
window, fixing in position using wooden blocks and sheet metal screws,
The aluminium sections used shall be standard make confirming to IS
and fixtures shall be of ISI marked) (900mm x 500mm).
sqm
1551.42
213.30
7.60
336.94
6.85
2116.11
0.00
2116.11
4702.47
4702
inium three track sliding window as per the approved drawing with all
ts, weather stripping etc with top and sides section of window of size
utward for for drainage, fixed and sliding shutters with bottom, sides and
hick, interlocking section 40mm x 28mm x 18mm x 1.50mm thick inter
nylon rollers of lift type and fixing 4mm pin headed glass for shutters
gauge mesh with shutter frame for bottom, sides and top with section of
ocking section 40mm x 28mm x 18mm x 1.50mm thick inter locked for
rs of lift type fitted with nylon/polymer mesh on rollers/pulley duly fixed
istant accessories like locking system 1 No. per set of sashes and the
chor fasteners, silicon rubber sealant, easy glazing/deglazing at site etc.,
handle to each shutter, cost and conveyance to site of powder coated
fixtures etc., including labour charges for manufacturing window, fixing in
al screws, overheads & contractors profit etc., complete for finished item
l be standard make confirming to IS 1948-1961 and as approved by the
(1200mm x 1200mm)
Sqm
Kgs.
Kgs.
Kgs.
Kgs.
Kgs.
Kgs.
Joinery data 2018-19 - Page : 149
Kgs.
Kgs.
sqm
RM
3575.92
403.20
7.20
204.00
347.88
1037.48
9.33
5585.00
760.40
6345.40
4406.53
4407
minium three track sliding window with fixed fan light of 500mm at
uired accessories such as stoppers, bolts, weather stripping etc with top
x 31.5mm x 1.50mm thick, sloping outward for for drainage, fixed and
section of 40mm x 18mm x 1.50mm thick, interlocking section 40mm x
for weather scaling and mounted on nylon rollers of lift type and fixing
shutters fitted with aluminium glazing clips and SS 20 gauge mesh with
h section of size 40mm x 18mm x 1.50mm thick, inter locking section
locked for weather scaling and mounted on nylon rollers of lift type fitted
uly fixed with TPV gaskets / EPDM weather seal resistant accessories
s and the system is to be installed at the site using anchor fasteners,
ng at site etc., and fan light top and side section of size 63.50mm x
all Aluminium sections 25 microns thick including fixing of 100mm long
conveyance to site of powder coated aluminium sections, glass, rubber
ges for manufacturing window, fixing in position using wooden blocks and
s profit etc., complete for finished item of work. (The aluminium sections
S 1948-1961 and as approved by the Engineer and fixtures shall be of
Sqm
Kgs.
Kgs.
Kgs.
Kgs.
Kgs.
Kgs.
Kgs.
Kgs.
Kgs.
sqm
RM
Joinery data 2018-19 - Page : 150
5028.50
714.00
16.20
204.00
321.12
1837.20
8.98
8130.00
1106.90
9236.90
3622.31
3622
Joinery data 2018-19 - Page : 151
um sliding window with fixed fan light at top as per approved drawings
ers,bolts,weather stripping etc. for all sizes and sections in accordance
-1961 with top section of window of size 62mm x 32mm ,1.47mm thick,
m x 31.75mm,1.50mm thick and bottom frame size 61.85mm x
r drainage and fixed and sliding shutters with bottom,sides and top with
er locking section 40mm x 28mm x 18mm,1.60mm thick inter locked for
rollers of lift type and fan light top &side sections of size
coating of all alluminium sections 25mm microns thick and fixing 5mm
ers fitted with
sqm
5096.12
1535.76
18.00
2334.32
7.19
8991.40
0.00
8991.40
2775.12
2775
Joinery data 2018-19 - Page : 152
um sliding window with fixed fan light at top as per approved drawings
ers,bolts,weather stripping etc. for all sizes and sections in accordance
-1961 with top section of window of size 62mm x 32mm ,1.47mm thick,
m x 31.75mm,1.50mm thick and bottom frame size 61.85mm x
r drainage and fixed and sliding shutters with bottom,sides and top with
er locking section 40mm x 28mm x 18mm,1.60mm thick inter locked for
n rollers of lift type and fan light top &side sections of size
coating of all alluminium sections 25mm microns thick and fixing 5mm
ick ground glass for shutters fitted with alluminium glazing clips and
nium sections 25mm microns thick including cost and conveyance to site
,
sqm
3701.38
1023.84
12.00
1556.22
2.60
6296.03
0.00
6296.03
2914.83
2915
2908.00
0.00
2908.00
2908
Joinery data 2018-19 - Page : 153
Joinery data 2018-19 - Page : 154
boards as per drawing with medium teak wood frames of size 75mm x
ides laminated 18mm thick for shutters with 18mm x 12mm teak wood
powder coated MS fixtures 3 Nos. butt hinges of size 100mm long(for
mm x 10mm, 2 Nos of handles 100mm long and standard locking
d conveyance of all materials to site, labour charges, over heads and
em of work.
sqm
1281.51
1730.16
120.00
48.00
60.00
244.80
100.00
171.25
1995.84
541.77
3.90
6297.23
0.00
6297.23
2915.38
2915