Sei sulla pagina 1di 2

Republic of the Philippines

President Ramon Magsaysay State University


(Formerly Ramon Magsaysay Technological University)
Iba, Zambales, Philippines

COLLEGE OF INDUSTRAL TECHNOLOGY


FINAL EXAMINATION
TRADE TECH 1

NAME:_____________________________
COURSE & SECTION:________________
SCORE:____________________________

TEST I: IDENTIFICATION
Directions: Identify the following statements. Write your answer on the space provided.

Orthographic projection 1. A technical drawing in which different views of an object are projected on different
reference planes observing perpendicular to respective reference plane
Auxiliary view 2. Type of orthographic projection used to determine the true size and shape of inclined and
oblique surfaces of objects
Section view 3. A view used on a drawing to show an area or hidden part of an object by cutting away or
removing some of that object
Section Plane 4. It is called a “cutting plane”,
_______________5. Used to the exterior and interior of the part in the same view
Cutting plane 6. The line that separates the different types (interior and exterior) may be a centerline or a
visible line.
Section line 7. Lines should never be parallel or perpendicular to the object lines.
_______________8. Used to generate a section for a small area without using a cutting-plane line.
_______________9. A set of techniques that help an artist create depth and distance, creating images that
appear 3D on a 2D surface
Picture plane 10. A flat surface on which an image is created
_______________11. Lines that go left to right. Used in a landscape image.
_______________12. Lines that go from top to bottom
_______________13. Lines that go on forever, side by side keeping the same distance apart.
_______________14. The area(s) in the image where the image is no longer visible.
_______________15. Where parallel lines meet in a perspective drawing to give the appearance distance.
_______________16. The number reflects how many vanishing points there are in the illustration.
_______________17. The front of the image is before the viewer.
_______________18. Lines that are converge to 1 point
_______________19. The auxiliary view that lies uniformly on both sides of the reference line
_______________20. The auxiliary plane that is not perpendicular to any principal plane

TEST II. ENUMERATION


Directions: Enumerate the following

Three different reference planes Types of view in orthographic projections

21. 27.
22. 28.
23. 29.

Three types of view in drawing


24.
25.
26.
TEST III. ILLUSTRATION
Directions: From the given drawings make the isometric, foundation and orthographic drawings. Label the front
and right view on each, as well as the top for the orthographic.

30-37

38-41

42-50

Prepared by: Reviewed by: Noted:

PAULO JOY O. BUENAOBRA ALICIA R. LOON ATANACIO M. NACANA, Ph.D.


Instructor Program Chairperson College Dean

Potrebbero piacerti anche