Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
SDE060
Sectional directional control valves with
direct acting solenoid
Walvoil is pleased to present this new series of directional control valves with direct
acting solenoid: SDE030 • SDE060. These valves have solenoid operated working sections
that can be used in different types of circuits.
Working conditions
This catalogue shows technical specifications and diagrams measured with mineral oil of 46 cSt
viscosity at 40° (104°F) temperature.
Capable of high flows in a
SDE030 30 l/min 7.9 US gpm
compact design Nominal flow
Different types of inlet covers SDE060 60 l/min 15.8 US gpm
Different types of spools Nominal pressure (max) 315 bar 4600 psi
Different options to be flanged Back pressure (max.) 210 bar 3050 psi
on the ports side
Fluid Mineral oil
Available for parallel and series
min. 12 mm2s 12 cSt
circuits Viscosity
Emergency handlever available max. 400 mm s 2
400 cSt
Standard threads
SDE030 SDE060
Main BSP UN-UNF BSP UN-UNF
Inlet P and outlet T G 3/8 3/4-16 (SAE 8) G 1/2 3/4-16 (SAE 8)
Inlet P1 and outlet T1 G 3/8 3/4-16 (SAE 8) G 1/2 3/4-16 (SAE 8)
G 3/8 9/16-18 (SAE 6)
Ports A and B G 3/8 9/16-18 (SAE 6)
G 1/2* 3/4-16 (SAE 8)*
D1WWCB01E
direct acting solenoid
Dimensions
SDE030 F 70
E F
2.75 TYPE
E 35
mm in mm in
1.38
SDE030/1 103,5 4.07 134 5.28
4,5
0.18 SDEO30/2 149,5 5.88 180 7.09
SDE030/3 195,5 7.70 226 8.90
SDE030/4 241,5 9.51 272 10.71
M8
A1 A2 SDE030/5 287,5 11.32 318 12.52
23,5 28,5
0.92 1.12
T
SDE030/6 333,5 13.13 364 14.33
220,40
2.75
31,5
1.24
8.68
1.34
70
34
P SDE030/7 379,5 14.94 410 16.14
SDE030/8 425,5 16.75 456 17.95
B1 B2
1,25
0.05
0.18
4,5
70
SDE060 F
2.75
E 35
1.38
6,5
0.25
E F
TYPE
0.63
mm in mm in
16
M8
8.99
2.75
31,5
1.24
1.34
36
34
1,25
0.05
Hydraulic circuit
A1 B1 A2 B2
P1
T1
D1WWCB01E
Features
SDE030, SDE060 are very flexible products with the following features:
- Sectional valves allow easy assembly
- Customized inlet covers are available for the different applications
- Sections are arranged to easily add service valves (flanged to the port side of the section).
The main features of each product are the compact design, high flow, solenoid operated section.
The solenoids are on/off with or without emergency lever.
There are several spool options available allowing modification to the valve/circuit without complete disassembly.
There are sections available for the following circuit requirements:
- parallel
- series
Applications
This new series of directional valves can be used in many applications: aerial and all terrain platforms, tow trucks, truck cranes,
boom mowers, sprayers and many others. They can be applied as both main function and as auxiliary function.
Basic:
- Double acting, 3 position, normally closed/open in neutral position spools
- Single acting spools
- Series spools
- Parallel and series section configurations
- Inlet covers with main relief valve and solenoid unloader valve
- Inlet cover with main relief valve and compensated flow control (proportional manual solenoid control)
- Flange mounted service valves available
- Solenoid 12/24 VDC on/off
- Emergency lever available.
WWW.WALVOIL.COM