Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
01. (i) Question Numbers 01 to 25 (25 questions) will carry one mark each.
(ii) Question numbers 26 to 55 (30 questions) will carry two marks each.
(iii) Question Numbers 56 to 60 (5 questions) will carry one mark each.
(iv) Question numbers 61 to 65 (5 questions) will carry two marks each.
02. Wrong answers carry 33% negative marks. (i.e., 0.33 marks for one mark & 0.66 marks for two marks)
However, there is no negative marking for Numerical Answer Type questions.
14. A vehicle moving at 70 kmph was stopped 18. A safe and wholesome water is the one
by applying brake and the length of skid which is
mark was 24.7 m. If the break efficiency of (A) unpolluted and free from diseases
the vehicle is assumed 97%, then the producing bacteria
retardation developed in the process of (B) unpolluted, free from disease producing
breaking is __________ m/sec2 (rounded bacteria and toxic substance as well as
upto two decimal places) excessive amounts of minerals and
organic matter.
15. The formation width of a double lane NH (C) unpolluted
embankment is (D) unpolluted, free from disease producing
(A) 7 m (B) 7.5 m bacteria and toxic substances
(C) 11 m (D) 12m (or) more
19. The phenolic compounds in public water
16. A colony of population 30,000 discards solid supply should not be more than
waste at a rate of 1.5kg per capita per day. (A) 0.1 ppm (B) 0.01 ppm
The components of solid waste and their (C) 0.001 ppm (D) 0.0001 ppm
densities are as below:
20. Match the following pairs
Type of solid Density
P (%) Column – I
waste (kg/m3) P. Francis turbine
Food waste 35% 800 Q. Kaplan turbine
Paper waste 15% 110 R. Pelton wheel
S. Hydroelectric power plant
Leather 10% 125
Fruit waste 20% 950 Column – II
1. Penstock
Other waste 20% 650
2. Adjustable guide vanes
3. Spear nozzle
Estimate the volume occupied by the solid 4. Adjustable runner vanes
waste (in m3)
P Q R S
17. Suppose that P(x = 2) = p(x = 3) given that x (A) 4 2 1 3
has poisson distribution. Then, P(x 0) (B) 2 4 3 1
equals (C) 1 4 2 3
(A) e–3 (B) 1 – e–3 (D) 3 4 1 2
(C) 1 – e–2.5 (D) e–2.5
21. Excess of alumina in brick earth makes the 25. One day rainfall of 12 cm at a place ‘X’ was
brick found to have a return period of 100 years.
(A) Impermeable The probability that a one-day rainfall of this
(B) Brittle and weak (or) longer magnitude will not occur at all
(C) To lose cohesion ‘X’ during the next 50 years.
(D) To crack and warp on drying (A) 40% (B) 60%
(C) 50% (D) 55%
22. Due to attack of dry rot, the timber
(A) Cracks (B) Shrinks
(C) Reduces to powder (D) None of these GROUP – II
Each question carries Two marks
23. The state of stress at a point is shown on 30 2 = 60
element in the figure below
60 MPa 26. If the plate load test shows settlement of
xy = 30 MPa
plate as 15 mm, for a 400 mm wide plate
then how much more settlement a footing of
45 MPa width 1.2m will have for a clayey soil
compared to sandy soil
(A) 74.4 mm (B) 45.6 mm
The major principal stress (in MPa) at the (C) 15.6 mm (D) 12.4 mm
point as
(A) 67.8 MPa (B) 53 MPa 27. A simply supported beam of span 4000 mm is
(C) 47 MPa (D) 58.2 MPa loaded with a uniformly distributed load of
50 kN/m. fy for the material is 250 MPa.
24. Which one of the following is the incorrect Which rolled steel section is required?
statement about infiltration curve
(A) The surface runoff is equal to the Steel table
difference between the rainfall and the I-Section Z in cm3
infiltration that occurs during the period
ISMB 500 1808.67
of rainfall excess
(B) Rainfall simulators usually give higher ISMB 400 1022.90
values of infiltration than those given by ISMB 300 606.06
infiltrometers ISMB 600 3060.4
(C) The actual rain-drop impact is simulated
in double ring infiltrometer (A) ISMB 500 (B) ISMB 400
(D) All of the above (C) ISMB 300 (D) ISMB 600
28. The plan of a proposed spoil heap is shown 30. In order to determine the bulk density of a
in the figure below. The heap will stand on a soil insitu, 4.7 kg of soil was extracted from
thick deposit of soft clay with elastic a hole at the surface of the soil. The hole
modulus of 15 MN/m2 and Poisson’s ratio of required 3.65 kg of loose dry sand for its
0.5. The uniform pressure on the soil may be filling. If it takes 6.75 kg of the same sand to
assumed as 150 kN/m2. What is the fill a calibrating can of 4.5 litre capacity, the
immediate settlement under the point marked bulk density of the soil is ________ (kN/m3)
X at the surface of the soil.
40 m 31. The solution of differential equation
x2y – 2 xy + 2y = 8 interms of arbitrary
constant c1 and c2 is
(A) y = c1 x + c2 x2 + 4
120 m 20 m (B) y = c1 x + c2 x2 + 2
X c
(C) y 1 c 2 x 2
40 m x
c
(D) y 1 c 2 x 4
Influence factor for vertical displacement due x
to elastic compression
Rectangular If 32. A 20 m thick isotropic clay stratum overlies
(L/B) Centre Corner an impervious rock. If coefficient of
1 1.12 0.56 consolidation of soil is 5 × 10–4 cm2/sec, then
1.5 1.36 0.68 how much more years it will take for 90%
2 1.53 0.77 consolidation from 50% consolidation.
5 2.1 0.05 (A) 50 years (B) 213 years
10 2.52 1.23 (C) 115 years (D) 165 years
100 3.38 1.69
33. A uniform simply supported beam is
(A) 0.168 m (B) 0.231 m subjected to clockwise moments at both end
(C) 0.515 m (D) 0.624 m A and B is 2, then the ratio of applied
moments at A and B will be
29. If an object moves along the line segment (A) 1.25 (B) 1.5 (C) 2 (D) 4
from (0, 0, 0) to (3, 6, 10) subject to the force
f x 2 i y 2 j z 2 k then the work done by 34. The minimum value of the function
force is 4 x2 + 9y2 + 8x – 36 y + 24 is
1243 (A) – 16 (B) 16
(A) (B) 1243
3 1 1
(C) (D)
3 1 16 16
(C) (D)
1243 1243
ACE Engineering Academy Hyderabad|Delhi|Bhopal|Pune|Bhubaneswar|Lucknow|Patna|Bengaluru|Chennai|Vijayawada|Vizag|Tirupati|Kukatpally|Kolkata|Ahmedabad | Kothapet
:6: Civil Engineering
36. The moisture content of soil in the root zone 39. A BG railway curved track have ‘cant’ of 15
of an agricultural crop at certain stage is cm. If the maximum design speed on curve is
found to be 0.08, the field capacity of the soil 90 kmph, the length of transition curve is
is 0.2. The root zone depth is 1.4 m. The ______ (m). (rounded upto nearest integer)
consumptive use of crop at this stage is 3
mm/day and there is no percolation during 40. Three vehicles are traversing a 1-mile
this period. Irrigation efficiency is 65% it is segment of a highway and the following
intended to raise the moisture content to the observation is made:
field capacity in 9 days through irrigation. Vehicle A : 2 min
The necessary depth of irrigation is (Assume Vehicle B : 5 min
s = 1.4) Vehicle C : 5 min
(A) 360 mm (B) 398 mm The average travel speed of the three vehicle
(C) 340 mm (D) 380 mm is __________ mile/hr
37. Four persons P, Q, R and S take turns (in the 41. A 60 cm high, 40 cm diameter cylindrical
sequence P, Q, R, S, P, Q, R, S, P, ......) in water tank is being transported on a level
rolling a fair die. The first person to get a six road. The highest acceleration anticipated is
wins. The probability that S wins is 4 m/s2. The allowable initial water height in
125 125 the tank if no water is to spill out during
(A) (B)
671 571 acceleration is
125 125 (A) 8.2 cm (B) 45.2 cm
(C) (D)
471 371 (C) 51.8 cm (D) 40.2 cm
38. Following observation were made for 42. Water flows through a 15cm diameter
conducting the water budget of a reservoir horizontal pipe at a rate of 0.06m3/s and a
over a period of one month of 30 days pressure drop of 30kPa per 30m of the pipe is
Average surface area = 20 km2 measured. The friction factor is _________.
Mean surface inflow rate = 12 m3/sec
Reduction in storage = 15,000,000 m3 43. A shallow wide rectangular channel has a
Pan evaporation coefficient = 0.78 flow of 3000 m3/sec with a velocity of 2
Mean surface outflow rate = 18 m3/sec m/sec. Manning’s coefficient (n) for the river
ACE Engineering Academy Hyderabad|Delhi|Bhopal|Pune|Bhubaneswar|Lucknow|Patna|Bengaluru|Chennai|Vijayawada|Vizag|Tirupati|Kukatpally|Kolkata|Ahmedabad | Kothapet
:7: GATE Full Length Mock Test
is 0.025. If a hydraulic model with vertical maximum shear stress theory, the minimum
scale 1:50 and horizontal scale of 1:1000, is diameter of the bar is ______ mm
to be built, what would be the Manning’s
coefficient (n) for the model _____ × 10–2 49. The shear force diagram for the beam shown
is 12 kN/m
44. What is the intake per sec of a bell mouth
canal intake for a city of 1,25,000 Persons,
drawing water from a canal which runs only
2m 1m
for 12 hours a day. Take average 10 kN
consumption per person as 135 lpcd
(A) 0.195 m3 (B) 16.875 m3
(A) (B)
(C) 0.391 m3 (D) 1.406 m3 18 kN
8 kN
12 kN
2 kN
45. In an industry, a machine emitting a sound of 2 kN
51 A square beam placed such that neutral axis 55. Stiffness matrix for the frame shown below
is parallel to side of square and side 200 mm with co ordinate system is
1
is subjected to a maximum shear force of 100 2I E
2
kN. The maximum shear stress is 4m
(A) 3.33 MPa (B) 2.5 MPa
(C) 2.8 MPa (D) 3.75 MPa
2I 5 m
shall be held on June 15, 2019 between 10.00 62. Find the compound interest on Rs. 7500 at
a.m. to 2.00 p.m. No error. 4% per annum for 2 years, compounded
(C) (D) annually.
(A) Rs. 610 (B) Rs.612
58. The following question has a pair of (C) Rs.614 (D) Rs.616
capitalized words followed by four pair of
words. Choose the pair which best expresses 63. The ratio between the present ages of P and
the relationship similar to that expressed in Q is 6 :7. If Q is 4 years old than P, what will
the capitalized pair. be the ratio of the ages of P and Q after 4
years?
SUGGEST : DEMAND (A) 3 : 4 (B) 3 : 5
(C) 7 : 8 (D) 4 : 8
(A) Deny : Request (B) Question : Ask
(C) Give : Receive (D) Take : Grab
ACE Engineering Academy Hyderabad|Delhi|Bhopal|Pune|Bhubaneswar|Lucknow|Patna|Bengaluru|Chennai|Vijayawada|Vizag|Tirupati|Kukatpally|Kolkata|Ahmedabad | Kothapet
: 10 : Civil Engineering
64. The line chart given below shows the 65. The Marketing Department of Dello Motors
expenditure on clothes (in 000') for the given released the following advertisement.
years. “Dello Motors manufacture the safest cars.
Last year Auto Re-Search a reputed
magazine, reported that in the last five years
Dello Cars were involved in at least 20%
fewer accidents than cars built by any other
manufacturer.”
What does this ad unfairly infer?
(A) Dello Motors follow better safety
systems while manufacturing.
2011 2012 2013 2014 2015 2016
(B) If a brand of car is involved in fewer
accidents it is an indicator of safety.
Expenditure in year 2016 is how much (C) The report published by Auto Re-Search
percent more than the expenditure in year has in-built bias in it.
2015? (D) Dello cars manufactured this year are as
(A) 19.07 (B) 23.57 safe as the cars manufactured last year.
(C) 21.16 (D) 17.64
Detailed solutions for this test will be uploaded on our website on 10-01-2020 at 6.00 pm.
This test results will be available on our website on 24-01-2020 at 6.00 pm.
ACE Engineering Academy https://www.aceenggacademy.com/gate-2020-offline-test-series/
Hyderabad|Delhi|Bhopal|Pune|Bhubaneswar|Lucknow|Patna|Bengaluru|Chennai|Vijayawada|Vizag|Tirupati|Kukatpally|Kolkata|Ahmedabad | Kothapet