Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Article 5 of the EU regulation 517/2014 Gas stated that Gas density Meter must be tested in intervals ≤ 6 years.
No shutdown of the switchgear during GDM Check
Feature : Feature :
Testing the SF6 gas density measuring Automatically identify the normally
instruments by means of comparative open or normally close of the GDM
measurements contact
Simple measurement on-site, in the Automatically evaluate the
laboratory or in the workshop measurement, to give the judgement
Pressure generation through hand for qualified or not qualified
pump Built-in micro-printer, could print the
Low weight and compact design measuring results in report form.
Precise pressure setting by means of Data uploading with RS232 or USB, to
the fine-adjustment valve do the PC-side data management,
report printing.
Equipped with a variety of adaptors,
most of the GDM can be on-site
calibrated without disassembling.
equipment with different brand.
Retrofit Solution
1
Gas SF6 Quality Analysis
For the measurement the GA11 is pumping a small amount of the SF6 gas through the sensors directly to the internal storage.
Results are automatically compared to SF6 contamination or reuse standards stored on board.
Via USB the results can be quickly downloaded and reviewed on the PC.
Features : Features :
Leak Detection
Low maintenance no wear parts
High sensitivity for detecting leaks down to 1 ppmv
Unaffected by background contamination
Non-Dispersive Infrared Technology
2
Handling, Filling , and Filtering Solution
‘
/ GPU10
Suitable for
3
Handling, Filling , and Filtering Solution
4
Key Buying Factor GPUXXX
Filter performance:
o Double Filter for SF6 Purifying
o 3 X higher Filter Capacity*
o Automation filter process
Safety
o SIL2 (safest operation in the market)
Efficient
o Longest maintenance interval*
o Faster SF6 evacuation and air evacuation*
Easy to operate:
o Automation process with digital monitor (HMI) interface
o Report via USB /Ethernet port in PDF or Excel format
Automatic filter to dry SF6 Gas and Reach optimum quality, avoid further impurity to develop.