Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1. DESCRIPTION:
NATURAL GAS
2. SCOPE:
This material specification provides the properties of natural gas used in performance and reliability
testing of Generac products.
3. APPLICATION:
Generac products designed to run on natural gas are tested for performance and reliability with clean,
dry, pipeline quality natural gas. The properties presented in this standard represent the natural gas
used in product testing. The performance and reliability of Generac products using non-conforming
fuels are unknown and cannot be guaranteed.
4. BACKGROUND:
Natural gas is, by definition, any gas that occurs organically, but this standard focuses on natural gas
that is intended for use as fuel in reciprocating internal combustion engines. This natural gas is
generally assumed to have specific properties, but compositional differences and contaminants greatly
influence the fuel’s effectiveness. This variation can lead to lower power output, pre-ignition, detonation,
and corrosion if the fuel does not meet this standard. This standard identifies an acceptable fuel
composition for use in Generac products.
5. FUEL SPECIFICATIONS:
The fuel used by Generac is clean, dry, pipeline quality natural gas adhering to the following:
GENERAC POWER SYSTEMS OWNS THE COPYRIGHT OF THIS SPECIFICATION WHICH IS SUPPLIED IN CONFIDENCE AND MUST NOT BE COPIED Page 1 of 2
OR TRANSMITTED TO OTHERS WITHOUT THE EXPRESS WRITTEN CONSENT OF GENERAC POWER SYSTEMS
6. HAZARDS IFORMATION:
6.1 EMERGENCY OVERVIEW
DANGER!
EXTREMELY FLAMMABLE GAS - MAY CAUSE FLASH
FIRE OR EXPLOSION!
REVISION HISTORY
GENERAC POWER SYSTEMS OWNS THE COPYRIGHT OF THIS SPECIFICATION WHICH IS SUPPLIED IN CONFIDENCE AND MUST NOT BE COPIED Page 2 of 2
OR TRANSMITTED TO OTHERS WITHOUT THE EXPRESS WRITTEN CONSENT OF GENERAC POWER SYSTEMS