Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
DXC 5000
Customer Benefits
• Cost effective solution
• High quality of service
• Very high modularity
• SNMP management
• IP/LAN ready
AREVA T&D
DXC 5000®: ACCESS
CROSS-CONNECT MULTIPLEXER
FLEXIBILITY POWERFUL MANAGEMENT SYSTEM
The DXC 5000 is more than a conventional access Different management solutions are available,
platform. It includes natively: answering to different network complexities and
customer maintenance organisations:
• Drop & insert facility and Cross connect feature
allowing an optimization of the transmission • DXC 5000/E : Element Management Layer, this
capability and an easy integration of new circuits in solution responds to a centralised monitoring of
the network. equipment with Graphical User Interface (GUI),
• DXC 5000/N : Network Management Layer is the
Thus it can easily be introduced into most Network
right solution to fully operate a complex network. In
Topologies.
addition to all conventional features usually
proposed for the Backbone level (Security, Graphical
User interface, statistics, ….), the DXC 5000/N
FUTURE ORIENTED
includes versatile tools for automatic path creation
and configuration of equipment simply by
The range of DXC 5000 interfaces allows to cover all "mouse click".
needs from conventional ones (FXO, FXS, 2/4W E&M,
RS232, V.35, G.703, ….) to the more sophisticated DXC 5000 Management Systems are also directly
ones oriented to new Data network architecture like compatible with the Integrated Network Management
Ethernet, ATM, Frame Relay, IP, …. System Areva e-terra telecomTM, allowing an unified
fault management for different network constituents.
RELIABILITY / AVAILABILITY
CONSTITUTION
By concept and design, DXC 5000 is a cost effective
solution to match high level of availability and harsh
environmental constraints. The DXC5000 consists of a 5 U plate-form including:
In addition, the DXC 5000 proposes a modular • One -48VDC power supply board. An optional one
approach in term of protection mechanisms like can be added (1+1 protection - in Load sharing
controller redundancy, shared power supply units as mode),
well as 1+1 protection for the 2Mbit/s and optical • One controller unit which forms the interface
interfaces giving a suitable answer to critical between the aggregates and the tributaries. It fulfils
applications. the common functions of a multiplexer as well as the
Cross Connect function (capacity up to 128 Mbps).
An optional one can be added (1+1 protection),
• Four ½ slots for the plug-in of aggregate boards as
well as ATM Frame Relay or Router boards,
• Twelve slots for the connection of aggregate boards
as well as user interface boards.
Ethernet 10/100Mb
HOT LINE
DXC5000
HOT LINE Remote
Subscriber
PABX DXC5000
SWITCH SCADA
RTU
STATION
DXC5000 SCADA
RTU
STATION
Only one platform
Ethernet
10/100Mb
SCADA
RTU
to cover all your
STATION access needs
from conventional one
to future oriented one.
AGGREGATE INTERFACES TRIBUTARIES INTERFACE
Note : X50 sub-rate multiplexing supported > ATM adaptation layer AAL0 and AAL5 supported
MiCOM is a registered trademark of AREVA. All trade names or trademarks mentioned herein whether registered or not, are the property of their owners. - 389191982 RCS PARIS - Printed in France - SONOVISION-ITEP
> Data interface at 64 or Nx64kbit/s tributary (X.21) OPERATING CONDITION
• Type of board Double slot > Power supply From -36Vdc to -72Vdc
• Number of circuit 6 > Operating temperature 0°C to 50°C
• Data rate 56 or 64 kBps x n > Humidity 0 to 95% at 23°C
(n=1 to 24/31) (non condensing)
> Storage temperature -25 to + 55°C
> Data interface at 64k (G.703)
AUTOMATION-L3-DXC5000-BR-06.05- 0761b- GB - © - AREVA - 2005. AREVA, the AREVA logo and any alternative version thereof are trademarks and service marks of AREVA.
• Type of board Single slot MECHANICAL CHARACTERISTICS
• Number of circuit 8
• Data rate 64 kBps (co-directional) > Dimensions 435 x 225.5 x 220 mm (WxHxD)
> Mounting 19" rack mountable - 5U height
> Router Interface