Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
To
learn more about cookies and our privacy practices, please review our privacy policy with updates effective
May 25, 2018.
C1331-18 Standard Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo
Cross-Correlation Method
C1332-18 Standard Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by
Pulse-Echo Contact Technique
E127-15 Standard Practice for Fabrication and Control of Aluminum Alloy Ultrasonic Standard Reference Blocks
E213-14e1 Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
E273-15 Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
E317-16 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing
Instruments and Systems without the Use of Electronic Measurement Instruments
E428-08(2013) Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks
Used in Ultrasonic Testing
E664/E664M-15 Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic
Waves by Immersion Method
E797/E797M-15 Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method
E1001-16 Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo
Ultrasonic Method Using Longitudinal Waves
E1158-14 Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal
Wave Ultrasonic Testing of Metal and Metal Alloy Production Material
E1324-16 Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments
E1901-18 Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam
Ultrasonic Methods
E1961-16 Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with
Focused Search Units
E1962-14 Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT)
Techniques
E2001-18 Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-
metallic Parts
E2223-13(2018)e1 Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle
Beam Ultrasonics
E2373/E2373M-14 Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique
E2479-16 Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral
Longitudinal (LCR) Waves
E2491-13(2018) Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing
Instruments and Systems
E2534-15 Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and
Non-Metallic Parts
E2580-17 Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in
Aerospace Applications
E2700-14 Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays
E2904-17 Standard Practice for Characterization and Verification of Phased Array Probes
E2985/E2985M-14 Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements
Derived from Resonant Ultrasound Spectroscopy
E3044/E3044M-16e1 Standard Practice for Ultrasonic Testing of Polyethylene Butt Fusion Joints
E3081-16 Standard Practice for Outlier Screening Using Process Compensated Resonance Testing via Swept Sine
Input for Metallic and Non-Metallic Parts
E3167/E3167M-18 Standard Practice for Conventional Pulse-Echo Ultrasonic Testing of Polyethylene Electrofusion
Joints
E3170/E3170M-18 Standard Practice for Phased Array Ultrasonic Testing of Polyethylene Electrofusion Joints
Showing results 1-3 of 3 matching Proposed New Standards under the jurisdiction of E07.06 E07 Home
WK64276 Part-to-Itself Examination Using Process Compensated Resonance Testing Via Swept Sine Input for
Metallic and Non-Metallic Parts
Showing Results 1-1 of 1 matching WITHDRAWN standards under the jurisdiction of E07.06 E07 Home
E1315-93(2002) Standard Practice for Ultrasonic Examination of Steel with Convex Cylindrically Curved Entry
Surfaces (Withdrawn 2007)
All
GO
Home Contact
Support Copyright/Permissions
Reading Room
Copyright © 1996 - 2019 ASTM. All Rights Reserved. ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 19428-2959 USA