Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Rev : 0
CIVIL, STRUCTURAL AND ARCHITECTURAL
DESIGN BASIS Page : 5 of 46
1.0 INTRODUCTION
1.1 GENERAL
This Design philosophy report is intended to provide a basis for Architectural, Civil and
Structural design and design requirements for specific application like machine
foundation, cable and pipe trenches, ramps, culverts and pipe rack. It also includes codes
and standards to be applicable, specific design criteria, primary design loads and
combinations for all buildings/ structures which shall create a Baghjan GGS.
Only latest editions of codes and standards shall be followed with latest amendments.
In case of conflict between codes & standard and job specification, more stringent
• Fire Proofing in Oil and Gas Industry (a publication of Oil OISD-164 Latest
• Criteria for design of lined canals and guidance for selection IS: 10430
of type of lining
Rev : 0
CIVIL, STRUCTURAL AND ARCHITECTURAL
DESIGN BASIS Page : 6 of 46
• Code of practice for use of cold formed light gauge steel IS 801: 1975
• Dimensions for Hot Rolled Steel Beam, Column, Channel IS 808: 1989
• Covered electrodes for manual metal arc welding of carbon and IS 814: 2004
• Code of Practice for Use of metal arc welding for general IS 816: 1969
• Dimensions for steel plates, sheets strips and flats IS 1730: 1989
• Specification for Rolling and cutting tolerances for hot rolled IS 1852: 1985
steel products
• Recommended Practice for Hot-Dip Galvanizing of Iron & Steel. IS 2629: 1985
• Hexagon Head Bolts for General Steel Structures – Specification. IS 6639: 2005
• Hot Rolled Parallel Flange Steel Sections for Beams, IS 12778: 2004
Rev : 0
CIVIL, STRUCTURAL AND ARCHITECTURAL
DESIGN BASIS Page : 7 of 46
• Specification for Portland pozzolana cement (Pt-1) Fly-ash based. IS 1489: 1991
• Specification for Hard-drawn Steel Wire Fabric for Concrete IS 1566: 1982
Reinforcement.
• Code of practice for construction of stone masonry (Part-1 & 2). IS 1597: 1992
• Specification for high strength deformed steel bars and wires for IS 1786: 1985
concrete reinforcement.
• Code of practice for concrete structures for the storage of IS 3370: 2009
Rev : 0
CIVIL, STRUCTURAL AND ARCHITECTURAL
DESIGN BASIS Page : 8 of 46
• Code of practice for concrete structures for the storage of IS 3370: Latest
construction of buildings.
• Code of practice for extreme weather concreting, (Part-1 & 2). IS 7861: Latest
• Specification for two parts polysulphide based sealants (Pt-1&2). IS 12118: 1987
spread foundations
engineering purposes
foundation
• Code of practice for thin walled tube sampling of soils IS: 2132
• Code of practice for design and construction of septic tanks IS: 2470(Part-I)
engineering
Rev : 0
CIVIL, STRUCTURAL AND ARCHITECTURAL
DESIGN BASIS Page : 9 of 46
• Safety code for piling and other deep foundations IS: 5121
foundation
• Code of practice for indexing and storage of drill cores IS: 4078
• Code of practice for in-situ vane shear test for soils IS: 4434
and shafts
Rev : 0
CIVIL, STRUCTURAL AND ARCHITECTURAL
DESIGN BASIS Page : 10 of 46
penetration test
properties of soil
overburden
• Code of practice for in-situ permeability test - Test in bed IS: 5529(Part-II)
rock
• Code of practice for diamond core drilling for site IS: 6926
rockfill dams
Rev : 0
CIVIL, STRUCTURAL AND ARCHITECTURAL
DESIGN BASIS Page : 11 of 46
rocks
testing
rocks
house sites
• Code of practice for sampling by thin wall sampler with IS: 10108
stationary piston
soils
Rev : 0
CIVIL, STRUCTURAL AND ARCHITECTURAL
DESIGN BASIS Page : 12 of 46
foundations on rocks
Rev : 0
CIVIL, STRUCTURAL AND ARCHITECTURAL
DESIGN BASIS Page : 13 of 46
Rev : 0
CIVIL, STRUCTURAL AND ARCHITECTURAL
DESIGN BASIS Page : 14 of 46
other related codes and standards shall also be followed wherever required.
a) OWNER / CONSULTANT have carried out the Soil investigations and the relevant
data is available with them and will be made available to the BIDDER for reference.
b) However, the BIDDER shall note that there is neither express nor implied
guarantee, as to either the accuracy of the records or any interpretation of them. The
information about the site of work and site conditions in the Tender documents is