Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
The Brabender DDW-MS-FW120/0(1)[2]-350 dients can use the non agitated FW120/1.
(600) loss-in-weight feeder, the gravimetric Extension hoppers are available with 350 dm³
version of the Brabender FW120 FlexWall® (12.4 ft³) or 600 dm³ (21.2 ft³) volume.
feeder, is capable of reliably and accurately All components are fully mounted and internally
metering bulk ingredients with temperatures wired to junction boxes.
from 0 to 50°C (32-122°F) at medium feed rates. Options include versions with onboard control /
The feeder has the following main components: speed control electronics and interchangeable
a free-standing base/scale with 4 high-accuracy screws.
strain gauge load cells, a Brabender FW120 Ingredient contact steel parts are made of stain-
FlexWall® feeder with a paddle-massaged flex- less steel. Mild steel parts are painted light grey
ible polyurethane hopper (alternatively available (RAL 7035).
without paddles), and an exension hopper for Environmental conditions: 0-45°C (32-113°F),
ingredient storage. up to 85% humidity without condensation.
The motor driven (amplitude adjustable) pad- The feeder conforms to CE directives.
dles flex the polyurethane hopper walls to pro-
vide consistent mass flow of ingredient into the
screw without degradation. The FW120/2 uses
a separate motor for the external massaging
paddles to allow paddle speed adjustment for
difficult flowing ingredients. Free flowing ingre-
* optional inlet only available for 600 dm³/21.2 ft³ extension hopper FW120/2 0.75 kW 142 yes 0.37 kW
Brabender Technologie GmbH & Co. KG, Kulturstrasse 55-73, 47055 Duisburg, Germany, Tel: +49 (0) 203 9984-0, email@brabender-technologie.com
Brabender Technologie Inc., 6500 Kestrel Road, Mississauga, Ontario L5T 1Z6, Canada, Tel: 1-905-670-2933, sales@brabenderti.com
Brabender Loss-in-Weight Feeder DDW-MS-FW120/0(1)[2]-350(600)
Technical Data
Ø (mm) Tube Tube dia. Max. speed Max. feed rate Max. feed rate
Screw Type
x p (mm) designation (mm) (rpm) (dm³/hr)* (ft³/hr)*
Fiber Screw (F) F 12066/90-K60 1270 133.0 x 3.0 142/100 Hz on request on request
* Theoretical values at 100% screw filling level and motor speed. Depending on the flow characteristics the screw filling level may decrease to 50%. In addition, max. speed should be
reduced to allow for bulk density variations.
• Free-standing mounting base with vibration • Stainless steel housing with rear access door • Extension hoppers
isolation feet and junction boxes • Interchangeable screws • 350 dm³ (12.4 ft³), straight walled
• 4 high-accuracy strain gauge load cells • Paddle-massaged flexible polyurethane • 600 dm³ (21.2 ft³), steep sided
• Approx. net weighing ranges: hopper (FW120/1 is without paddles) • Cover with inlet pipe and
• FW120/0(1): 650 kg/1433.0 lb • Variable frequency driven 3 phase AC motor vent pipe for automatic refill, or
FW120/2: 635 kg/1399.9 lb (0.75 kW, IP65, insulation class F, TEFC), • Cover with hinged lid
(350 dm³/12.4 ft³ extension hopper) max. screw speed 142 rpm for manual refill
• FW120/0(1): 605 kg/1334.0 lb • FW120/2 only: second motor for • Stainless steel SS 1.4301 (304)
FW120/2: 590 kg/1300.7 lb separate paddle drive (0.37 kW,
(600 dm³/21.2 ft³ extension hopper) IP65, insulation class F, TEFC)
• Ingredient contact surfaces are
polyurethane and SS 1.4301 (304)
• Flexible connections • Version without discharge connection pipe Feeder control and speed modules are offered
• Exchange screws and screw tubes • Screw tube without vertical downspout either mounted on the feeder or for mounting
• Screw extension 400 mm/15.7 in • Pressure compensation in a separate panel. Controls can communicate
(not available for blade screws) • Explosion-proof designs directly to most host/PLC systems or to Bra-
• Maintenance disconnect box • Designs for higher or lower ingredient bender Congrav® Operator Interfaces (see
• JetFilter for vent pipe and/or ambient temperatures Congrav® Works Standards)
Brabender Technologie GmbH & Co. KG, Kulturstrasse 55-73, 47055 Duisburg, Germany, Tel: +49 (0) 203 9984-0, email@brabender-technologie.com
Brabender Technologie Inc., 6500 Kestrel Road, Mississauga, Ontario L5T 1Z6, Canada, Tel: 1-905-670-2933, sales@brabenderti.com