Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
ESPE-L
1
Universidad de las Fuerzas Armadas ESPE-L, Departamento de Eléctrica y Electrónica,
Ingeniería Electromecánica
sjpalma@espe.edu.ec
2
Universidad de las Fuerzas Armadas ESPE-L, Departamento de Eléctrica y Electrónica,
Ingeniería Electromecánica
rbhidalgo@espe.edu.e
Abstract: [19:17, 26/10/2019] Palma: The automation of industrial processes has its strong base in the implementation of PLCs,
devices capable of handling very difficult actions for human beings with great accuracy and reliability. There are currently a large
amount of software and hardware for automating basic processes to the most complex ones. For the development of this practice, three
softwares have been used (STEP 7 MICRO-WIN; S7 200; PC_SIMU), developed by the international company SIEMENS.
In cement automation, the processes of filling, advancing and deposition and mixing of substances are taken into account. For this, the
HMI was created in the PC-SIMU software which simulates the necessary actions that this process has, for the programming I use the
STEP7 software through a Ladder language, this programming was obtained from the GRAFCET analyzed of the process, for the
simulation of a PLC S200 Siemens the software S7 200 was used which loads the programming done in STEP 7. In the simulation it was
possible to determine the necessary conditions and restrictions that the program must meet for the process in the cement plant, the
program times have Some variation, this is due to the processing speed of the PC used in the simulation.
Figure 7: Inicio del recorrido de las vagonetas al presionar el botón inicio y volcado de cemento en la vagoneta A
Figure 13: Pulsación del Botón PARO DE EMER. (retorno de las vagonetas A y B a las posiciones iniciales).
UNIVERSIDAD DE LAS FUERZAS ARMADAS
ESPE-L
Figure 14: Pulsación del botón ALARMA. (Detiene el proceso por un cierto tiempo y luego reinicia el proceso con
normalidad desde el punto detenido).
4. Conclusión
La automatización del proceso de mezclado (Cementera) se
logro realizar de manera correcta, también se concluye que
en el desarrollo a la automatización de este proceso se
incluyen los parámetros impartidos en clase por parte del
docente, cabe recalcar que en este documento no se adhiere
toda la programación ya que la misma será posible
visualizarla en los archivos adjuntos (Programas) en el
documento.
5. Recomendaciones
6. Referencias