Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Manual
where the gap between the door and
into the battery room, leakage and Number Keypad
doorframe is more than 5mm.
breakage may occur, so please be
Cautiously manage the passcode so careful.
that other people cannot know it, and
regularly change the number. When the battery life is ended, replace
all the batteries at once, and avoid
Do not operate the product when your using new and used batteries at the Card Recognition
Convenient Opening of the hand is wet, and be careful to not let same time. Area
Door water, beverages, and other liquid to
When cleaning the product, do not
External Power
Simple operation via card and get inside the product. Contact Area
wipe it with water, benzene, or
passcode Do not forcibly press or use a sharp alcohol, and instead, use a dry cloth.
tool to hit the button.
Dual-Authentication When you are going out, always
Replace the batteries to new ones
Feature check the ensure that the door was
within one week of first hearing the
External Power\
battery replacement notification alarm.
Dual-Authentication feature through fully locked. Contact Area
card and passcode
Warning
Internet Home Page You must carry or keep at least one
emergency key outside.
SamsungSNS(Inc.)
In the case of an emergency, please
read and learn the instruction for
Anywhere in the country If you accurately provide the product name,
ServiceCenter fault condition, and contact number, then Gently press the battery cover of the main unit on the
Representative we will always provide kind assistance and
inside and pull the cover in the direction shown in the
PhoneNumber quick service to customers' questions.
manual switchgear. arrow.
GC68-01769A ED:03 2 3
Opening the door from the outside ※ All registration and setting up can only
Opening the door from the outside be operative while the door is open.
(passcode) Passcode Registration
When the product is first purchased, it is set in dual-security (card, key tag)
mode. To set the product into normal mode, please refer to Passcode can be registered in 4~12 digits, and only one
the 'dual-security mode setting" method. can be registered to use.
1. Press the [Register] button. 2. Register the new passcode.
1. Press the [Number Input] button Success :
↑Ding Dong
Deng Dong
Fail :
Ding Dong Ding Dong Melody Ding Dong Deng Melody
[Number Keypad] is touched. CARD Ding Dong
Open the battery cover and Enter the new passcode (4~12
When the number pad is lighted shortly press [register] button. digits) and press the [*] button.
Touch the up, contact the card or key tag in
[number pad] the [card recognition area]. After To prevent theft accidents, it is recommended to use the passcode that
is 6 digits or longer (only 0~9 numbers are usable).
2. Enter the passcode. 1 seconds, the door is opened.
Caution Please be careful to manage the passcode so that other people will not
know. Using the same passcode for a long period of time may lead to
Dual-security mode its exposure, so regularly change the passcode for use.
Success :
Opening and closing the door from the inside use.
↑Ding Dong
Deng Dong
Fail :
Ding Dong
Electrically opening Electrically closing Card and Key Tag Registration
Ding Dong the door the door
When card or key tag is registered, previously registered
card and key tag information are all deleted, so try to
Two buttons randomly lit When all of the lights in register all cards and key tags at once. Total of 20 card keys
up, so press the two the number keypad show and key tags can be registered (ISO 14443 Type A support)
numbers in the up, enter the passcode Dual-lock ↑Ding Dong Dual-lock ↓Ding Dong
sequence. and press [*] button. (3 seconds) Deng Dong (3 seconds) Deng Dong 1. Press the [Register] button. 2. Register the new passcode.
Melody Melody
Normal Mode With the door locked, With the door manually
pressing the [OPEN] locked, pressing the Ding Dong Deng
Ding Dong Melody Melody
button of the main unit on [OPEN] button of the main
Success : the inside opens the door. unit on the inside locks the
↑Ding Dong Deng Dong Melody
already closed door. Open the battery cover and Contact the card or key tag that
Fail :
Ding Dong Ding Dong Melody shortly press [register] button. needs to be registered.
Mechanically opening Mechanically closing
the door the door 3. End card key registration
When all of the lights in the number keypad show Ding Dong Deng Melody
up, enter the passcode and press [*] button.
To end registration, press the [register] button of the main
unit on the inside.
Passcode must be entered when the number keypad is lighted up,
so if the lights are not on, then touch the [number keypad] and then To register various cards and key tags continuously, register the card or
re-enter the passcode. key tag, and contact another card or key tag within 10 seconds. If
When the passcode is incorrectly entered to cancel the input, press With the door locked, turn With the door closed in another card or key tag is not registered within 10 seconds, the
Reference the [ ] button and start from the beginning. the manual switchgear to manual lock status, turn Caution registration automatically ends.
If the passcode is incorrectly entered for five consecutive sounds, a direction. the manual switchgear to To check if the card or key tag is normally registered, check the card and
different alarm sound is played for about 10 seconds, and the key tag, and then close the door.
operation of doorlock is paused for roughly 3 minutes. During the direction. "Samsung SNS Doorlock" abides to the "ISO 14443 Type A standards, and
operation pause status, "beep" sound is played every 10 seconds, the cards, key tags, and NFC-use smartphones that completed
and after 3 minutes, a long "beep" sound is played, and the pause certification from "Samsung SNS Doorlock" are able to be registered on
status is automatically disabled. the doorlock for use.
4
Downloaded from www.Manualslib.com manuals search engine 5 6
Setting/Disabling Dual-Lock
Setting and Disabling Dual-Security Mode Automatic/Manual Lock Feature
Dual-Lock Feature is a feature to prevent the door from
Dual-Security Mode is a mode for prevention of passcode It is possible to set the automatic lock feature that automati- opening from the outside.
exposure by first pressing two random numbers and then cally locks the door when it is closed.
entering the actual passcode.
Setting Dual-Lock Feature Disabling Dual-Lock Feature
Open the battery cover Press [4] or [6] button, and Ding Dong Deng Melody
and shortly press the then [*] button to set or
[register] button. disable the dual-authentication [0] button: Silence
mode. (excluding the alarm sound, all sound is disabled.)
[1]~[3] button: As the levels go up, the sound
becomes larger.
Battery Replacement
When the battery replacement notification alarm sounds
If opening the door with passcode, card, or key tag triggers "Fur
Elise" melody, then it is time to replace the batteries.
Replacing the battery
All 4 batteries must be replaced to new ones within 1 week of first
sounding of the alarm.
- Depending on the door lock usage situation, following number of
batteries are inserted to be used.
10
Downloaded from www.Manualslib.com manuals search engine