Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Province of Cebu
City of Talisay
TALISAY CITY COLLEGE
Poblacion, Talisay City
2nd Semester. - SY 2018-2019
BACHELOR OF SCIENCE IN INDUSTRIAL TECHNOLOGY PROGRAM
COURSE SYLLABUS
3 II. Depicting circles and curves on projection planes (Frontal Planes, Horizontal Planes, Profile Planes).
6 III. Drawing isometrical object involving curves, holes and circular planes.
1 PRELIM EXAM
V. Identify Important Components of a Working Drawing
2
VI. Drafting a working drawing of simple objects.
2
1 MIDTERM
1 FINAL
ALIGNMENT OF COURSE OUTCOMES WITH SUMMATIVE ASSESSMENT TASKS
1. Facilitate maximum knowledge on the concept of 1. Verbal and non-verbal examinations (Written and 1. Quizzes, Terms examinations and skills tests are
correct placement of measurement on orthographic Skill Tests) required to measure the academic performance of
views. 2. Outputs thru plates and categorized projects in the students.
2. Inculcate skills on how to depict curves and circles on drafting. 2. Outputs in the form of plates and categorized
projection planes. 3. On-the-Spot Designing thru free hand and projects in drawing are given highest weight in
3. Provides skills on how to draw curves, holes, and mechanical drawing. grades assessment.
circular shapes isometrically. 4. Required assignments/ agreements relevant to the 3. On-the-Spot skill assessment in designing thru
4. Provide knowledge on concept of working drawing. subject. freehand and mechanical drawing is another priority.
5. Get acquainted on the components of working 4. Compilation of plates, categorized projects and
drawing. assignments/ agreements are concrete evaluation
6. Teach students on furniture designing, and how to criteria for a valid and reliable computation of
draw its working drawing. Note: These are common assessment tasks in both terms. grades.
7. Get acquainted on the different kinds of wood joints. (Prelim - Finals)
8. Facilitate ideas on the basic concept of house
planning.
DESIRED LEARNING TEACHING AND
COURSE CONTENT REFERENCES ASSESSMENT OF TASKS RESOURCE MATERIAL TIME TABLE
OUTCOMES LEARNING ACTIVIITES
At the end of Prelim, the Chapter I. Concept on Engineering Drawing PARTICIPATE Week 1-5
students are expected correct placement of Rank Zozzora, 2003, DISCUSSION
to: measurements on
orthographic views. Technical Drafting I, At the height of Verbal Assessment Chalk-board Pictorial
1. Facilitate Cardenas and Francisco delivering the lesson, Chalkboard Exercises Aids and Devices
knowledge on Chapter II. Depicting F, New Ed, 2012 the students are Demonstration Skill test
the concept of circles and curves on encouraged to interact Hand-outs and other
correct projection planes. Architectural Drafting, based on their Learning facilities
placement of and Design, Helper and perceptions.
measurements Chapter III. Drawing Wallach, 2014
on orthographic isometrical object CHALK-BOARD Periodic Exam 1
views. involving curves, holes ILLUSTRATION
2. Inculcate skills and circular planes.
on how to depict Students are taught
curves and Chapter IV. Concept and to understand the
circles on significance of a working concept and be made to
projection drawing. explain the significance
planes. of a working drawing.
3. Provides skills
on how to draw MARRISONION
curves, holes, TECHNIQUE
and circular
shapes Students are
isometrically. motivated to ask
4. Define the question for verification
concept and and further clarification.
discuss the
significance of
working
drawing.
5. Integrate moral
values five
minutes before
the presentation
of the lesson
proper.
PRELIM
DESIRED LEARNING TEACHING AND
COURSE CONTENT REFERENCES ASSESSMENT OF TASKS RESOURCE MATERIAL TIME TABLE
OUTCOMES LEARNING ACTIVIITES
At the end of Prelim, the Chapter V. Identify Engineering Drawing CHALK-BOARD Week 7-12
students are expected Important Components Rank Zozzora, 2003, DISCUSSION AND
to: of a Working Drawing DEMONSTRATION
Technical Drafting I, Chalk-Board Hand-Outs Sample
1. Identify and Chapter VI. Drafting a Cardenas and Francisco The teacher will Demonstration Verbal Model Chalk-Board
draw the working drawing of F, New Ed, 2012 discuss and Tests Required Plates Drawing Instruments
important simple objects demonstrates the 3 and Other Categorized and Materials needed.
components of a Architectural Drafting, types of pictorial Projects.
Working Chapter VII. Furniture and Design, Helper and drawing drawn
Drawing. designing and its Wallach, 2014 mechanically.
2. Draw a working working drawing.
drawing of a ILLUSTRATIVE-
simple object. SHOPTALK Periodic Exam 1
3. Facilitate ideas
on furniture Inculcate
designing and knowledge and skill on
depict working how orthographic views
drawing. are drawn and
4. Integrate moral placement of notes,
values five specifications and
minutes before dimensions for actual
the presentation fabrication.
of the lesson
proper.
MIDTERM
DESIRED LEARNING TEACHING AND
COURSE CONTENT REFERENCES ASSESSMENT OF TASKS RESOURCE MATERIAL TIME TABLE
OUTCOMES LEARNING ACTIVIITES
At the end of Prelim, the Chapter VIII. Kinds of Engineering Drawing CHALK-BOARD
students are expected wood joints. Rank Zozzora, 2003, ILLUSTRATION AND
to: DEMONSTRATION
Chapter IX. Basic Technical Drafting I, Output of original Sample model. Week 14-17
1. Get acquainted concept of house Cardenas and Francisco The teacher furniture design. (Originally Designed)
on the different Planning. F, New Ed, 2012 illustrates and Quizzes Hand-outs
kinds of wood demonstrates on the Skill Tests Teaching Aids
joints. Architectural Drafting, board a sample furniture And devices
2. Teach students and Design, Helper and design as product of his Chalk-Board
of the basic Wallach, 2014 original experience.
concept of
house planning. LECTURE Periodic Exam 1
3. Integrate moral
values five The teacher
minutes before explains the step
the presentation procedures of designing
of the lesson process which appears
proper. to be realistic and
practical.
He inculcates the
necessary information in
terms of notes and
specifications and
reliable and dimensions
considering correct
placement.
FINAL
COURSE REQUIREMENTS AND CLASSROOM POLICY
Suggested Readings and References Cardenas, F. Technical Drawing, Manila: National Book Store, New Ed. 2003.
Fajardo, M. Planning and Foudation, Manila Philippines, National Book Store, 2016.
Hepler, and Wallach B., Architectural Drawing and Designing, New York: McGraw Hill, 2014.
Course Requirements Formative: Attendance, Quizzes, Class Participation, Oral Participation, and Projects.
Summative: Periodic Exam (Prelim-Final)
Grading System Talisay City College’s Unified Grading (Cumulative)
Classroom Policy Core Values. Exercise core values of the institution.
Submission. Submission of activities/ projects should be on time even instances of non-attendance for whatever reason.
Points will be deducted for late submissions.
Class Attendance: Regular attendance is expected. Should there be absences; the same must be strictly followed.
Class Deportment. Everyone must observe professional behavior at all times and shall maintain civil discourse throughout
Class time. Disagreements/dissentions have to be anchored on reason and respect and should be discussion-hinged. Leaving
the class other than to attend to emergencies and personal necessities is highly discouraged. Moreover, cell phone are
discouraged to be used during class hours, hence, it must be on silent mode.
ALTHER A. DABON