Sei sulla pagina 1di 47

Energy Information Days

Brussels 23 October 2017

Contractual PPPs – Energy Efficient


Buildings and SPIRE Parallel Session
– Calls 2018/2019

José Riesgo Villanueva DG RTD –


Direction D - Industrial Technologies
Nanotechnologies, advanced Materials Biotechnology,
advanced Manufacturing and Processing (NMBP- WP
2018-20 Call – INDUSTRIAL SUSTAINABILITY
• Goal
 To further strengthen the global leadership of Europe’s industry in
environmental sustainability.

 EU Climate and Energy targets by 2030:


GHG reduction by 40% ; renewables share 27% ; energy efficiency 30%

• Covers
 SPIRE and catalysing the Circular Economy
 Clean energy through Innovative materials
 Energy-Efficient Buildings (EeB)

• Focus on 2 cPPPs (Public Private Partnership)


- Energy efficient Buildings (EeB)
- Sustainable Process Industries Resouces & Energy Efficiency (SPIRE)
Sustainable Process Industries through
Resource and Energy Efficiency (SPIRE cPPP)
• Process industries key to Europe's manufacturing base: 20% of
European industry in terms of both employment and turnover.
• EU process industry highly dependent on raw materials and energy
 efficiency key driver for both competitiveness and sustainability.
• Central objectives: optimise industrial processing, reduce energy and
resource consumption and minimise waste through cross sectorial
approaches  Significant contributions to the Circular Economy and to
fighting climate change.
• cPPPs:
- EC responsible for drafting and managing WP under H2020 rules
- Roadmap based strategy developed by SPIRE community
- Topics in LEIT-NMBP, SC3 Secure, clean and efficient energy and
SC5 Climate action, environment, resource efficiency and raw
materials
NMBP-SPIRE calls for 2018-2020
• Provide major momentum to R&I across the process industry sectors
with 320 M€ in calls only from NMBP-SPÏRE

• Build on the positive results achieved so far, aiming at large scale


demos to enable prompt industrial deployment

• Target breakthrough gains in resource and energy efficiency across


the process industry, through IS and cross-sectorial integration,
recycling and recovery technologies

• Support the development of smart retrofitting concepts to improve


performance of existing large scale installations

• Enable the shift to renewable electricity (e.g. electrification)


• International cooperation may be particularly appropriate in some
areas of the Sustainable Process Industry, in particular with Eastern
Partnership countries (Ukraine, Moldova, Georgia, Armenia,
Azerbaijan and Belarus)
CE-SPIRE-02-2018: Processing of material feedstock
using non-conventional energy sources
Specific Challenge:
• Non-conventional energy sources (e.g. microwave, plasma) as well as
electrochemical and photochemical processes have been applied to process
intensification showing, mostly at lab scale, potential for significant
improvements in process performance (e.g. selectivity, crystal nucleation,
productivity). Nonetheless, this domains remains still mostly untapped in terms
of wide industrial deployment.
• Need for processing paradigms that allow real time monitoring and control of
the transformations.
• Need for intensified technologies that are electricity powered and
therefore suitable for integration in a renewable energy grid.
• Need for flexible processes that can better follow market demand and enable
leaner production paradigms.
• Need for technologies with potential for downscaling (e.g. transition
batch to continuous processing).
TRL
IA 70%
From 4 to 6

CE-SPIRE-02-2018: Processing of material feedstock


using non-conventional energy sources
Scope:
Development of technologies applying non-conventional energy sources
to processes of high industrial interest.
• Potential for integration in a renewable electricity grid, and consider the inherent
limitations (energy supply fluctuation),
• Improve significantly resource and energy efficiency,
• Improve flexibility, working at variable throughputs without major
losses in the overall process performance (critical in fluctuating operations),
• Main focus on continuous processes, possibility to enable the transitions
batch to continuous,
• If/where relevant, containerised and/or mobile technologies could be considered,
• LCA to substantiate the environmental benefits is expected,
• Replicability and scalability should be proved.
EUR from 6 to 10
millions

CE-SPIRE-02-2018: Processing of material feedstock


using non-conventional energy sources
Expected impact:
• Allowing for a -30% to +30% energy input within RES fluctuations
timeframes, without significant losses in specific energy efficiency,
• Improvement in energy efficiency of 30%,
• Improvement in resource efficiency of 30%,
• Decrease in CO2 emissions by 40% (without considering the electricity
generation and at steady state),
• Decreased OPEX and CAPEX by 15%,
• Effective dissemination of major innovation outcomes, through the
development of learning resources with potential for integration in learning
programs (e.g. existing curricula, undergraduate level, etc.).

Relevant indicators and metrics, with baseline values, should be


clearly stated in the proposal.
CE-SPIRE-10-2018: Efficient recycling processes for
plastic containing materials
Specific Challenge:
• Plastic materials are everywhere in our society, they are used in all sorts
of applications (e.g. packaging) because of their properties and price.
• The use of complex hybrid plastic materials is also increasing
significantly, for example lightweight polymer composites to substitute
metals.
• Their wide use brings about problems linked to the huge amount of plastic
waste generated, and not sufficiently recycled.
• The redesign of plastics and advanced recycling processes is essential to
recycle and reprocess plastic waste into valuable products avoiding landfill.
• A major challenge lies in the development of appropriate process
technologies, able to process heterogeneous plastic waste material (at
least in part) for the production of added value products and process streams
to support the establishment of a circular economy.
TRL
IA 70%
From 5 to 7

CE-SPIRE-10-2018: Efficient recycling processes for


plastic containing materials
Scope:
Processes for the production of recyclable materials containing plastics.
• Improved energy and resource efficiency, and lower environmental
footprint compared to the current state of the art proved by LCA. LCC is
expected to prove the economic viability,
• Integration with the relevant value chains. Meaning securing the supply of raw
material streams and the involvement of the relevant actors,
• Flexibility in the utilisation of heterogeneous plastic waste (incl.
composites) as input, to allow the recycling and the re-processing into added
value products (excluding fuels). Bio-based raw materials are also in scope,
• Best valorisation of all components (e.g. fillers or fibres from
composites),
• Consider issues related to the quality of the raw materials (Primary/
secondary) -heterogeneity of plastic waste, further additives- and of the yielded
streams,
• Non-technological hurdles, such as regulations and standards, and economic
indicators (e.g. CAPEX and OPEX), DEMOs in real industrial settings are
expected.
EUR from 6 to 8
millions

CE-SPIRE-10-2018: Efficient recycling processes for


plastic containing materials
Expected impact:
• More efficient and sustainable process and processing technologies utilising
plastic waste as starting material for the production of added value products
such as recyclable plastic materials (e.g. composites) and chemicals (excluding
fuels),
• The technologies proposed should provide a decreased utilisation of
primary fossil resources in the process industry of at least 30 %,
• The concepts proposed should provide a decrease in CO2 emissions of at
least 20%,
• The concept should utilise at least 70% of waste material including at
least 40% of plastic waste,
• Effective dissemination of major innovation outcomes, through the
development of learning resources with potential for integration in learning
programs (e.g. existing curricula, undergraduate level, etc.).
Relevant indicators and metrics, with baseline values, should be clearly stated
in the proposal.
CE-SPIRE-03-2018: Energy and resource flexibility
in highly energy intensive industries

Specific Challenge:

• Energy intensive industries to achieve sustainable production


processes and unit operations which can be adapted to highly
fluctuating energy supply

• Energy and resource flexibility by means of process optimisation


of energy streams, heat recovery and raw materials flows
with variable properties

• Integration among sectors at regional level for the


optimisation of production system as a whole. Reduce
emissions and environmental impact, while maintaining
competitiveness and job security.
CE-SPIRE-03-2018: Energy and resource flexibility
in highly energy intensive industries
IA TRL
Scope (1/2): 100- 50% 5-7
Value chain optimisation in the design phase
In particular, proposals are expected to develop:
• Technologies allowing flexibility for raw materials. Consider quality
of the main products and by-products for valorisation;
• Novel advanced energy systems, could include new combustion and
gasification techniques applied to the highly resource and energy
intensive industries have to be developed;
• How the use of sustainable electrical energy sources, or heat
recovery, could enhance energy efficiency and cope with a fluctuating
energy input.
• Significant impact on the sustainability profile of the process
and/or the final products
CE-SPIRE-03-2018: Energy and resource flexibility
in highly energy intensive industries
IA TRL
Scope (2/2):
100- 50% 5-7
Proposals need to consider the following elements:
• A significant reduction, valorisation, re-use and recycling of by-
products and waste streams (solid, liquids and gaseous);
• System, process modelling and integration (up and down-stream)
improving energy and raw materials efficiency and flexibility, and minimising
the impact on the environment of the whole value chain. Taking also into
consideration optimisation at a plant/system level. The activities have to be
supported by a quantitative Life Cycle Assessment.
• Multiple demonstrators, including retrofitting of industrial installations,
• Relevant regulations (waste).
• Structural and regional funds /smart specialisation strategies strongly
encouraged.
CE-SPIRE-03-2018: Energy and resource flexibility
in highly energy intensive industries
EUR
(8-12 millions)
Expected impact:
• Cost reduction of the process of at least 10% (flexible scheme in
raw materials, including secondary raw materials, process and product
quality specifications)
• Improved process efficiency by at least 15% (re-utilisation of energy
and/or material process streams);
• CO2 emissions reduction by at least 5% and reduction of the
environmental impact by at least 15% in terms of the main key
performance indicators;
• Dissemination of major innovation outcomes (learning resources with
flexible usability).
• Relevant indicators and metrics, with baseline values, clearly stated
Opportunities in the NMBP SPIRE Call 2019
 CE-SPIRE-04-2019: Efficient integrated downstream processes (IA)
 CE-SPIRE-05-2019: Adaptation to variable feedstock through retrofitting
(IA 50%)

 DT-SPIRE-06-2019: Digital technologies for improved performance in


cognitive production plants (IA)

Topic Budget Budget Deadlines


2018 (M€) 2019 (M€)
CE-SPIRE-02-2018 Total: 31 Oct.17- 22 Feb. 2018
CE-SPIRE-03-2018 97.5
CE-SPIRE-10-2018
CE-SPIRE-04-2019 Total: 16 Oct.18- 21 Feb. 2019
CE-SPIRE-05-2019 65.8

DT-SPIRE-06-2019 32.9 16 Oct.18- 21 Feb. 2019


Energy Efficient Buildings Policy backgrounds
& Call Objectives
• Paris agreement (COP21), Energy Union policies
• EC revised targets (2030): GhG (40%), Energy efficiency (30%),
RES (27%)

• Energy Roadmap (2050) ; Drastic Reduction of energy


consumption(50 %) and CO2 emissions ( 90%) for new and
renovated buildings

• Construction sector/ Buildings are responsible for about 40% of


total Energy consumption in the EU and GhG emissions.

• R&I to integrate & demonstrate innovative technologies in : Materials


and components for energy savings,and generation, thermal distribution and storage,systems, use of
renewable energy sources, ICT efficient management buildings systems, tools for simulation
and prediction.
• Re- boost the business of Buildings"
• Ensure best use of innovative, reliable and affordable technologies

• Drive creation of High Tech. Building Industry – Improve its Competitiveness


EeB/EE PPP in Work Programme 2018

• LC-EeB 02: Building Information Modelling


adapted to efficient renovation (RIA)

• LC-EeB 06: ICT enabled, sustainable &


affordable residential building construction,
design to end of life (IA 50%)

• LC-SC3-EE-1-2018-2019: Decarbonisation of
the EU building stock (IA)

• LC-SC3-EE-5-2019: Next-generation of
Energy Performance Assessment and
Certification (IA)
Topic LC-EeB 02: Building information modelling
adapted to efficient renovation (RIA)

Specific Objective:

• Today, there are many BIMs that are too specific to the
building considered. Not really replicable easily to other
Buildings.

• Need to offer easy, practical, operational tools kits for all


stakeholders

• Challenge : provide compatible tools that would allow collecting of


data from existing buildings and exploit data from different sources
Topic LC-EeB 02: Building information modelling
adapted to efficient renovation (RIA) TRL
From 4
Scope: Proposals should include the following elements : -to 6

• To harmonise and provide common data exchange formats


• Modelling of the building energy should include existing
parameters, as well as the environmental and GIS data
• Enabling to couple BIM system with additional models
(acoustics; calculator for economic evaluation of various
renovations scenarios)
• Allow the development of applications to benefit from inputs of
inhabitants
RIA-
• Cooperation with standardisation bodies 100%
Topic LC-EeB 02: Building information modelling
adapted to efficient renovation (RIA)

Expected impact:
• Reduction of the renovation working time of at least
15-20 %

• Acceleration of the market uptake across Europe (target


of 50% of their renovation business of constructing/
renovations companies)

• Creation of best practice examples for construction


retrofitting sector for operators and associated EUR fom 5 to 7
stakeholders millions
LC-EeB-06: ICT enabled, sustainable and
affordable residential building construction,
design to end of life

Specific Objective:

• Including ICT in the overall building process and


operation

• ICT solutions need to include : the design,


manufacturing, construction, material choice,
operation and end of life phases affecting the overall
building lifecycle.

• Help reducing the performance gap.


LC-EeB-06: ICT enabled, sustainable and affordable
residential building construction, design to end of life

Scope: Proposals should include the following basic


elements TRL
from-
• Develop an advanced digitalised and industrialised 5 to 7
construction and building process utilising smart
combinations of materials/components;
• Assess the overall life cycle of construction, in order
to deliver more efficient buildings in terms of
sustainability and construction, maintenance and IA-
operation costs; 50%

• Provide for fully integrated systems to be compact,


exchangeable, and easy to commission and to operate
and demonstrate business solutions for operating
such building life-time ICT solutions.
LC-EeB-06: ICT enabled, sustainable and affordable residential
building construction, design to end of life

Expected impact:

• Reduction of CO2 with 15 -20 %;


• Construction cost reductions of at least 15 %;
• Buildings shortened construction time (reduced by at least
10 -15 %);
• Reduction of the gap between predicted and actual energy
consumption;
• Improved indoor environment;
• Significantly improved integration of the value chain; EUR from 6
-to 8
• Contribution to new standards and regulations; millions
• Demonstration of large scale replicability potential.
EeB/EE PPP in Work Programme 2019

• LC- EeB 01 Integration of energy smart


materials in non-residential buildings (IA)

• LC- EeB 03 New developments in plus energy


houses (IA)

• LC- EeB 05 Integrated storage systems for


residential buildings (IA)

• LC-SC3-EE-4-2019-2020: Upgrading
smartness of existing buildings through
innovations for legacy equipment (IA)
Deadlines 2018– 2019 / Indicative Budgets

Topic Budget 2018 Budget Deadlines


2019
LC-EeB 02-2018 31 Oct.17- 22 Feb. 2018
LC-EeB 06-2018 Total 35,0 31 Oct.17- 22 Feb. 2018

LC-SC3-EE-1 9,0 12,0 25 Jan.18 - 4 Sept.18


24 Jan.19 - 3 Sept.19
LC-SC3-EE-5 10,0 24 Jan.19 - 3 Sept.19

LC-EeB 01-2019 16 Oct.18 - 21 Feb. 2019


LC-EeB 03-2019 16 Oct.18 - 21 Feb. 2019

LC-EeB 05-2019 Total 53,5 16 Oct.18 - 21 Feb. 2019

LC-SC3-EE-4 10,0 24 Jan.19 – 3 Sept.19


Energy Information Days
Brussels 23-25 October 2017

NMBP Programme
Clean energy through innovative
materials
Monique IDIRI
DG RESEARCH & Innovation
Unit D3 - Advanced Materials and
Nanotechnologies
Monique.Idiri@ec.europa.eu
Clean energy through innovative materials
Proposed calls:

Topic: LC-NMBP-27-2019
Strengthening EU materials technologies for non-automotive
battery storage (RIA)

Topic: LC-NMBP-29-2019
Materials for non-battery based energy storage (RIA)

Topic: LC-NMBP-30-2018
Materials for future highly performant electrified vehicle
batteries (RIA)

Topic: LC-NMBP-32-2019
Smart materials, systems and structures for energy harvesting
(RIA)

Two stages call: 2018 - DL 23/01/18 & 28/06/2018


2019 - DL 22/01/19 & 03/09/19
NMBP Programme
Topic: LC-NMBP-27-2019
Strengthening EU materials
technologies for non-automotive
battery storage (RIA)
Martin GIEB
DG RESEARCH & Innovation
Martin.Gieb@ec.europa.eu
LC-NMBP-27-2019
Strengthening EU materials technologies for
non-automotive battery storage TRL
from 4 to 6
Specific Objective:
Energy Union and implementation of European and national energy policies
rely on increased use of sustainable energy production, as solar or wind
energy. This will allow a reduction of CO2 emissions, a cleaner air and
environment in general, and reduction of the dependence from fossil fuels.
New production technologies as industry 4.0 will make Europe more
competitive.

The obstacle:
Future energy supply will be much more decentralised, due to e.g. decentral
production of solar and wind power, or due to more delocalised ways of
industrial production. These industrial sites, as well as small robotised
devices or even private households need specific battery storage solutions.

The challenge:
Europe needs to strengthen the battery storage value chain through use of
advanced materials and nanotechnology to prepare European industry to be
competitive in these markets.
LC-NMBP-27-2019
Strengthening EU materials technologies for
non-automotive battery storage
Scope:
 Develop more price competitive, better performant and highly safe
battery storage solutions with improved lifetime by lowering cost and
capital expenditure through development of less expensive and more
performant materials (advanced electrode materials, electrolytes),
use of new chemistries, packaging and cell design or battery
production processes
 Consider safety aspects, sustainable materials, environmental
friendly production processes, second life applications
 Recycling should be inherently possible on a large scale permiting
overall costs that do not hamper market aceptance
 Strengthen existing EU value chain
 The new solution and its output targets (cyclability, reliability, usage
and lifetime) should be demonstrated and tested
 A full life cycle assessment and economic cost study of the new
solution has to be included
LC-NMBP-27-2019
Strengthening EU materials technologies for
non-automotive battery storage RIA
100%
Expected impact:
 Enhanced market success of the more competitive and sustainable
technologies, obtained by strong reduction of cost a) for stationary
applications, below 0,05 € / kWh/cycle , and b) cost reduction by at
least 20% in all other cases
 More competitive products due to increased lifetime, a ) with cyclability
for stationary energy storage clearly beyond current standards, to reach
at least 5000 cycles at 80% of Depth of Discharge, and b) significantly
improved cyclability in all other cases
 More sustainable products that are based on recyclability with a
improved recycling efficiency, ideally beyond 50%, reaching economic
viability (that has to be demonstrated)

Relevant indicators and metrics, with baseline values, should be clearly stated
Performance of new materials should be in line with those specified in the SET plan

4-6 Millions Euros


NMBP Programme
Topic: LC-NMBP-29-2019
Materials for non-battery based
energy storage (RIA)
Martin GIEB
DG RESEARCH & Innovation
Martin.Gieb@ec.europa.eu
LC-NMBP-29-2019
Materials for non-battery based energy storage

Specific Objective:
Energy Union and implementation of European and national energy policies
rely on increased use of sustainable energy production, as solar or wind
energy. This will allow a reduction of CO2 emissions, a cleaner air and
environment in general, and reduction of the dependence from fossil fuels.

The obstacle:
Sustainable energy technologies are competing with more traditional ones, and
key element is the cost for making the energy available (production & storage).

The challenge:
Sustainable energy production only works well if specific storage
challenges are solved. (No wind, no sun ► no energy)
For specific storage needs batteries may be not the best solution for energy
storage - other technologies have to be developed, that can respond to
these needs. - Their readiness for market deployment has to be shown. -
Specific materials have to be developed and price competitiveness, overall
economic viability and environmental aspects have to be considered.
TRL
from 3 to 5
LC-NMBP-29-2019
Materials for non-battery based energy storage
Scope:
 Targeted storage technologies are e.g.: Power to Gas, Power to
Chemicals and power to Liquids (based e.g. on ethanol, methanol or
ammoniac), or compressed air storage
 New or considerably improved materials are needed with increased
performance and reduced costs. - Most technologies, still in experimetal
phase, will have to be prepared for industrial deployment. - Price
competitiveness, environmental aspects and overall economic viability
have to be analysed.
 Special attention should be given to sustainable materials, circular
economy, recycling, reduced use of critical raw materials
 In Power to gas and power to fuels innovation will result e.g. from
improvement of materials for electrolysers (high capacity durable proton
exchange membranes or solide oxide electrolysis cell electrolysers for
hydrogen production), or from cost efficient materials for tanks of
hydrogen storage, etc.
 Materials for thermal storage and for hydropower, as well as for fuel
cells and supercapacitors are excluded from the call.
LC-NMBP-29-2019
Materials for non-battery based energy storage
RIA
100%
Expected impact:
 Improving technical and economic competitiveness of EU stationary
storage production suitable to store large amount of energy
 Help to reach climate goals, and CO2 reduction levels as per international
agreements (EU 2020 / EU2050 / COP21),
 improving indirectly the health of EU society
 Significant improvements in the levelised cost for energy while
maintaining or improving other properties of the storage solution

Relevant indicators and metrics, with baseline values, should be clearly stated
Performance of new materials should be in line with those specified in the SET plan

4-6 Millions Euros


NMBP Programme
Topic: LC-NMBP-30-2018
Materials for future highly
performant electrified vehicle
Martin GIEB batteries (RIA)
DG RESEARCH & Innovation
Martin.Gieb@ec.europa.eu
LC-NMBP-30-2018
Materials for future highly performant electrified
vehicle batteries
Specific Objective:
Electrified vehicles are a solution for a rapid decarbonisation of the
transport sector and for solving the problem of polluted city centres.
Current electrified vehicles use however still heavy and costly batteries,
and fast charging is another problem.

The obstacle:
Batteries are still a hampering factor for clear market acceptance of
electrified (mainly electric) vehicles, as they still are not able to deliver
the required performance as driving range fast charging capacity and
safety at a reasonable price.

The challenge:
New solutions have to be developed for real breakthrough in the
deployment and market share of these vehicles. New successful
technologies will allow Europe to strengthen the whole battery cell related
value chain and will help to re-establish European competitiveness.

TRL
from 3 to 5
LC-NMBP-30-2018
Materials for future highly performant electrified
vehicle batteries
Scope:
 New or significantly improved materials have to be developed to
optimise the battery cell and its components
 Proposed solutions should in particular investigate phenomena and problems
at the interfaces of the components of the battery cell electrode system
 Safety issues and thermal runaway should be considered and
knowledge on ageing processes should be gained in order to know cell
parameters for an eventual second life
 Production aspects should be considered at the prototype phase (but scaling-
up for production is not covered), and also simulation and modelling for the
development phase, life cycle assement and speciallly tailored test
procedures for validating the new technology, and standardisation and regulation
 Special attention should begiven to sustainable materials, the circular
economy, second life applications and avoidance of critical raw materials.
 Recycling should be inherently possible on a large scale permiting
overall costs that do not hamper market aceptance.
LC-NMBP-30-2018
Materials for future highly performant electrified
vehicle batteries
Expected impact:
 Reduction of CO2 and greenhouse gases due to deployment of electrified
vehicles with high performing and cost efficient batteries
 Development of new market competitive cell chemistries and materials
technologies for reduction of dependence from foreign supply and building
of knowledge base for creation of a competitive European cell production
 Strong improvement of performance: gravimetric energy density at cell
level to reach 400-450 Wh/kg by 2030, with power density beyond 700
Wh/kg; cyclability suitable for long term automotive application, ideally
up to 5000 cycles (for second-life use) by 2030
 Significant reduction of charging times; cost < 75 €/kWh by 2030 (pack)
 recyclability with a recycling efficiency beyond 50% reaching economic
viability (that has to be demonstrated)

Relevant indicators and metrics, with baseline values, should be clearly stated
Performance of new materials should be in line with those specified in the SET plan

6-8 Millions Euros RIA


100%
NMBP Programme
Topic: LC-NMBP-32-2019
Smart materials, systems and
structures for energy harvesting
Achilleas D. STALIOS
DG RESEARCH & Innovation
Achilleas.Stalios@ec.europa.eu
LC-NMBP-32-2019
Smart materials, systems and structures for energy
harvesting

We look for: Novel ways of using, harvesting and storing energy.


How ? Develop smart materials and material systems/structures
having the potential to reduce energy consumption as well as harvest,
generate and store energy.
Limitations in the implementation of such technologies
• Materials' operational reliability / recyclability and dependence on rare
elements.
• Cost issues
• Lack of efficient manufacturing processes TRL
from 3 to 5
The challenge: !!!

SMEs in EU dominate the sector of smart materials applications and


sensor technologies.

Implementing the technologies developed in this topic, SMEs will extend


their innovation potential, will maintain/improve their market position
and will increase EU competitiveness.
LC-NMBP-32-2019
Smart materials, systems and structures for energy
harvesting

Scope:
• Develop new materials and material combinations with energy
harvesting and storage capabilities (e.g. lead-free piezoelectric
based devices for energy generation and energy storing automotive
structural components or magnetic materials systems);
• Demonstrate recyclability and reliability of new smart materials, as
well as a reduction in the dependence on rare elements;
• Demonstrate a reduction of around 25% in overall materials and
processing costs relative to the state of the art and how the
implementation of those technologies would be achieved;
• Integrate sensor technologies (e.g. MEMS based sensor
concepts) and the potential linkage with the Internet of Things (IoT);
• Assess market perspectives, patents and standardisation
LC-NMBP-32-2019
Smart materials, systems and structures for energy
harvesting
RIA
100%
Expected impact:
• New materials facilitating technology systems for sustainable energy
supply allowing a reduction of greenhouse gas emissions by at least
40% based on lifecycle analysis;
• Reduction of hazardous waste by 50% through efficient manufacturing
practices and/or materials selection;
• Development of new technologies, applications and services providing
direct support for the wider implementation of the DSM (Digital Single
Market) and IoT (Internet of Things), e.g. enable the development of
wireless sensor networks, or, deployment of energy harvesting powered
sensor nodes to monitor remote locations.

Relevant indicators and metrics, with baseline values, should be clearly stated in the
proposal.

5-7 Millions Euros


Thank you!
#InvestEUresearch

www.ec.europa.eu/research
Pre-publication – Draft WP:
https://ec.europa.eu/programmes/horizon2020/
en/nmbp-work-programme-2018-2020-
preparation
participant portal:
http://ec.europa.eu/research/participants/por
tal/desktop/en/home.html
Policy Context
Clean energy through innovative materials

Global challanges towards a cleaner world


• United Nations COP21, COP22

Juncker priority Energy and Climate


• Energy Union, EU climate goals 2030 and 2050
Targets (2030): GhG (- 40% 1990), Energy efficiency (+27%), RES (+27%)
Roadmap (2050) (- 80 to95 % 1990)

Support of specific EC policies:


Energy Package - Accelerating Clean Energy Innovation ACEI
Europe on the Move Mobilty Package 2017
Policy Context
Clean energy through innovative materials

Invest in Green Economy (towards jobs and growth)

Boost a competitive and sustainable European Industry !


• better management of resources,
• economic instruments that are good for the environment,
• support for innovation,
• better policies for water and waste, and
• efforts to boost sustainable consumption and production

These goals can be reached through

Sustainable energy production and sustainable transport


Policy Context
Clean energy through innovative materials

Energy technologies and sustainable transport


need specific storage solutions
• Battery storage for electrified vehicles
• Battery storage outside automotive, for stationary
energy storage, industrial applications as industry 4.0,
households, etc..
• Non-battery based energy storage (for large energy
amounts)
And also: Sustainable Energy production (WP 2020) and
Energy harvesting (small devices)
EU technical and price competitiveness can be reached
through advanced materials & nanotechnology !

Potrebbero piacerti anche