Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Document Version: v1
Network Requirements
Management Interface
IP Address 192.168.1.20
Netmask 255.255.255.0
Gateway 192.168.1.1
SPAN / TAP
The network monitoring interface of the sensor must be provided an access point to provide network
visibility. This is most often done with a Switch Port Analyzer (SPAN), Mirror Port or a Test Access Port
(TAP). Regardless of which technology is used, it is critically important that the device be configured
properly.
Firewall Access
Outbound access to the following ports/protocols is required:
• TCP/22 (SSH)
• TCP/443 (HTTPS)
• UDP/53 (DNS)
• UDP/123 (NTP)
• TCP/9093 (Sensor Cloud Aggregator)
• ESP/IP Protocol 50 (IPSec VPN)
• UDP/500 (IPSec VPN ISAKMP)
• UDP/4500 (IPSec VPN ISAKMP NAT-Traversal)
Appliance Installation