Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
taianchina@gmail.com (Gtalk)
nantaita@yahoo.com.cn
nantai@nantai-china.com
dieseltester@nantai-china.com
ICQ: 430-657-053
Skype: nantaichina
Web Site www.nantai-china.com
Company profile
Taian Nantai Experimental Equipment Co., Ltd., located in Tianyuan Street Economic Development Zone Taian
City Shandong Province P.R. China, is the leading manufacturer specializing in producing the Diesel Fuel Injection
System Tester in China, is available for Traditional diesel fuel injection pump test bench, PT-CUMMINS pump and
injectors Test stand, EDC( Electronic Diesel Controler), CR( Common Rail pump Tester) , CRI(Common Rail Injectors
The Diesel fuel injection pump adopts the variable-frequency and variable-speed technique, which is divided into
four series-12PSB series, NT2000 series, NT2001 series and NT3000 series, and there are over thirty kinds of test
stands with a complete type and size, which can meet all kinds of users' demands to equipment. Its production process
The company's research and development capabilities are rich and the test measure is complete, and reward the
ISO9001-2000 CERTIFICATE and CE certificate. Taian Nantai Experimental Equipment Co., Ltd. has a strict internal
management and has established a complete and reliable quality assurance system. The company's product sale
network has spread all over the country. The after-sales service of product has a system of its own, which can provide
the best service for users timely. The company's aim is "honest and trustworthy operation and brazing new trails in
Test bench
12PSB
l Introduction
12PSB diesel fuel injection test bench is design for customer’s require. This series test bench adopt high quality
frequency conversing device, and it has characteristic with hi-reliability, ultra-low-noise, energy save, high output torque,
perfect auto-protecting function and operate easy. It is the kind of product with high quality and good price in our
business.
Used for Bosch in line pumps of K,M,MW,A,B,BV,P(ZU,ZW,ZM) and BOSCH rotative distributor injection pumps
EP/VA,EP/VM,VE….F…,also used for Chinese pumps such as Ⅰ,Ⅱ,Ⅲ,K,P7,BQ.etc.
● Main function
1.Measurement of each cylinder delivery at any speed
2. Test point and interval angle of oil supply of injection pump.
3. Checking and adjust the mechanical governor.
4. Checking and adjusting the distributor pump.
5. .Experiment and adjusting of behavior of supercharging and compensatory device.
6. Measurement of oil return of distributing pump
7. Testing of the electromagnetic valve of distributor pump.(12V/24V)
8. Measurement of the internal pressure of distributor pump.
9. Checking of the advance angle of advance device.(on request)
10. Checking the sealing of injection pump body
11. Install tube of auto-sucking oil supply can check on oil supply pump(including VE pump.)
● Technical characteristic
Type Technical characteristic Output power(KW)
1.test cylinders:12 5.5
2.RPM 0-4000 7.5
12PSB
3.Ten speed preset 11
4.With 12v/24v DC power 15
NT2001PLC NT3000
----------LCD touch screen
NT2001 NTS619
Introduction
NT2001(NT2001PLC) ,NT3000,NTS619 series color LCD display diesel fuel injection test bench is our newly research
hi-technology It controls by industrial computer. all controls by digital ,Display the rotary speed , temperature, pressure,
travel of stroke advance angle and the technical data of fuel injection pumps display on screen and can print. It’s
operation are easiness and quickly.
Main function
1.Measurement of each cylinder delivery at any speed。
2. Test point and interval angle of oil supply of injection pump.
3. Checking and adjust the mechanical governor.
4. Checking and adjusting the distributor pump.
5. .Experiment and adjusting of behavior of supercharging and compensatory device.
6. Measurement of oil return of distributing pump
7. Testing of the electromagnetic valve of distributor pump.(12V/24V)
8. Measurement of the internal pressure of distributor pump.
9. Checking of the advance angle of advance device.(on request)
10. Checking the sealing of injection pump body
11. Install tube of auto-sucking oil supply can check on oil supply pump(including VE pump.)
12 Checking the travel of stroke (on request)
13.oil lubricate (on request)
14. Foced cooler (on request)
PS:
15 two operating systems(Computer control+Digital control)-----------NT2001,NT2001PLC,NT3000
16.LCD touch screen-------------------------------------------------------------------NT2001PLC
Adjustable
Out Temperature Positive pressure
cylinders RPM Rpm pre-set Positive pressure
power(Kw) control system system
numbers system
7.5 11
12 0-4000 √ √ √ √
15 18.5
internal
DC power Oil return of travel of tooth Capability with
Air supply pressure of Advanced angle
supply VE pump bar pump type
VE pump
NTS815-- continuous fuel delivery analysis computerised measuring system for conventional and new diesel injection
systems.The electronic fuel delivery measuring system is compulsory for modern diesel injection system testing.It
guarantees a high level of reproductivity of the measured valuse.
Main function
1.Measurement of each cylinder delivery at any speed。
2. Test point and interval angle of oil supply of injection pump.
3. Checking and adjust the mechanical governor.
4. Checking and adjusting the distributor pump.
5. .Experiment and adjusting of behavior of supercharging and compensatory device.
6. Measurement of oil return of distributing pump
7. Testing of the electromagnetic valve of distributor pump.(12V/24V)
8. Measurement of the internal pressure of distributor pump.
9. Checking of the advance angle of advance device.(on request)
10. Checking the sealing of injection pump body
11. Install tube of auto-sucking oil supply can check on oil supply pump(including VE pump.)
12. Checking the travel of stroke(on request)
13.oil lubricate (on request)
14. Foced cooler (on request)
Technical characteristic
Adjustable
Out Temperature Positive pressure Positive pressure
cylinders RPM Rpm pre-set
power(Kw) control system system system
numbers
7.5 11
12 0-4000 √ √ √ √
15 18.5
Technical Parameters
Available for the NT3000, NT2001, NT2001PLC,NTS619,NTS815
Specifications
No. Items Data
1 Main motor output power(kw) 7.5,11,15,18.5,22
2 Frequency Converter Delta
3 Stroke Counting (Rpm) 50-9999
4 Standard injectors ZS12SJ1
5 Power of fuel pump motor (kw) 0.75
6 Scope of rotate speed (r/m) 0~4000
7 Number of cylinders 12
8 Height of principal axis center (mm) 125
9 Filter oil precision of test bench(μ) 4.5~5.5
10 big and small volumetric cylinder(ml) 150 45
11 Volume of fuel tank(L) 40
12 DC power supply 12/24V
13 Low pressure of fuel oil pressure(Mpa) 0~0.4
14 High pressure of fuel oil pressure(Mpa) 0~4
15 Pressure Gauge for VE Pump (Mpa) 0-1.6
16 Pressure Gauge for VE Pump (Mpa) 0-0.16
17 Control temperature of fuel (℃) 40±2
18 Flywheel inertia(kg*m) 0.8~0.9
19 Scope of rack bar stroke(mm) 0~25
20 Measuring range of flowmeter(L/m) 10~100
21 DC electrical source(V) 12 24
22 Positive pressure of air supply(Mpa) 0~0.3
23 Negative pressure of air supply(Mpa) -0.03~0
24 Dimension of Packing ( L*W*H(m )) 2.42(2.2)*1.14*1.83
25 Gross weight of Test bench( kg) 900
CR3000 CR3000A
Product Functions(CR3000 ,CR3000A)
The function of the tester for CR high pressure pumps is to provide the desired signal to drive the solenoid in the pump
being tested. CR2000 common rail Tester can used for testing following pumps:
BOSCH CP1, BOSCH CP2,BOSCH CP3,
DELPHI, SIEMENS, DENSO HP2 AND HP3.
It has the functions to test the Electromagnetic injectors.
It also can test 6 common rail injectors in one time.
Design Features
l Modulated driving signal to ensure the safety of the solenoid of the CR pump
l Adjustable duty cycle for the driving signal
l Short circuit protection for the output circuitry of the solenoid driving signal
l Measure and LCD display rail pressure
The CRS200 common rail system tester is the testing equipment specializing designed to test common rail system. It
adopts ARM7 core high-speed 32-bits microcontrollers as master controller, responsible for collecting the signal and
control, it uses MSC-51 compatible microcontroller and dot matrix 5.7-inh LCD screen, to realize the exchange between
man and machine, to finish the common rail testing system various functions testing.
System using scope
The system is suitable for test all kinds of BOSCH, DENSO, DELPHI common rail system fuel pumps, rail and injector.
Such as CP1, CP2, CP3, HP0 etc…..series of pump and injector. Using this equipment, it should install on the diesel
pump test bench, put the required common rail pumps or injectors installed on the specified location, connect the power
to let the machine work, and to test/calibrate it according to the related instructions.
Main technical parameters;
1. Injection open pressure: 4. Delivery counts
Control scope: 24V, 80V, 150V, Control range: 0-1000
Control accuracy: stage regulator Control accuracy: 1times
2. Injection open frequency: 5. Pump model :CP1,CP2,CP3,HP0
Control range: 0-1000HZ 6. Fuel pressure control
Control accuracy: 1HZ Control range: 0-200Mpa
3. Injection open hold time Control accuracy: 1Mpa
Control range: 0-65535us Control way: PID
Control accuracy: 1us 7. Power:220V
8. Work temperature: 0-40℃
9. Relative humidity: 20-90%RH
The system is suitable for test all kinds of BOSCH, DENSO, DELPHI common rail system fuel pumps, rail and injector.
Such as CP1, CP2, CP3, HP0 etc…..series of pump and injector. Using this equipment, it should install on the diesel
pump test bench, put the required common rail pumps or injectors installed on the specified location, connect the power
to let the machine work, and to test/calibrate it according to the related instructions.
Main technical parameters;
10. Injection open pressure:
Control scope: 24V, 80V, 150V,
Control accuracy: stage regulator
11. Injection open frequency:
Control range: 0-1000HZ
Control accuracy: 1HZ
12. Injection open hold time
Control range: 0-65535us
Control accuracy: 1us
cylinder
It can be used to test electromagnetic injector, 6 pcs injector at the same time
For BOSCH, DENSO, DELPHI injector
simulator—1 cylinder
It can be used to test piezo injector, 1 pc one time.
For SIEMENS injector
This products can adjust all kind of the RED4 electronic speed device in-line pump made by Japan Zexel Company. The
functions and characteristic of the controller as well as the testing data are completely same as the original one. The
product adopts the wide output power switch, high-speed AMP7 main control Chips, integrated Circuits, can finished all
the RED4 adjusting functions.
The EUP/EUI repair tester consists of a mechanical cam box with specified EUP adapter kits and an electronic controller.
The cam box will be installed on a standard high pressure pump test bench. The EUP/EUI being tested will be installed
in the cam box with the adapter. The electronic controller provides signal to drive the EUP solenoid synchronous with
cam shaft rotation. The EUP fuel outlet is connected through high pressure fuel line to an injector. The EUP fuel injection
quantities can be checked at given speeds and loads to judge its quality.
PT Cummins tester
PT212 PT Cummins pump test bench
PT 212 PT fuel pump Test bench is special equipment used to provide test
and calibration for CUMMINS PT fuel pump. It has abundant functions, high
Functions
Cummins tools:
Nozzle tester
PJ-40 Nozzle tester employs the characters of boost speed, high-stability, reasonable structure, flexible
operation, fix convenience. PJ-40 Nozzle tester is the ideal instrument calibrating and testing fuel opening pressure,
atomization, fuel angle and confined of needle.
Main technical characteristic
1. max pressure 40MPa
2. size of outside 320×300×500
3. net weight 30kg
4.pressure gauge range 0-60Mpa
PS-400A
TYPE FUEL INJECTOR TESTER IS A SPECIAL INSTRUCTION FOR THE OPERATION TEST
OF DIESLE ENGINE. IT IS SUITABLE FOR FOLLOWING PERFORMANCE TESTS
1. Initiative injecting press of injector
2. Sound of needle valve vibartion
3. spraying shape
4. Sealing function of needle valve and nozzle body mating pair
5. Sealing function in sreaponse to press.
QCM200
Gasoline Automatic Detecting Analyzing and Cleaning Tester
This product is applicable to diagnose and clean fuel injectors of various cars manufactured worldwide, improving
stability, reliability and reducing pollution. It can perform automatic detecting, analyzing and cleaning.
Main functions
It can not only diagnose and analyze the performance of the fuel injector, but also inspect dribbling, atomization,
injecting angle, distributive value, uniformity coefficient, and their on off cycle, etc of single or multiple fuel injectors.
1. Can do reverse flushing, flush-back cleaning, ultrasonic flushing, and disaffiliation-free flushing to one or more
fuel injectors
2. Automatically simulate the overall process under various pulse width and engine speed. The operation status of the
fuel injectors can also be observed whether at acceleration and deceleration.
3. Can manually set time, pulse width and rotation speed of the fuel injector, and observe the performance under varied
parameters. Ease and convenience of operation.
4. Can determine the shortest on-off cycle and the quality of the injector
5. Can do oil circuit testing, and disaffiliation-free flushing to the engine
Technical Parameter
l Voltage: AC220V±10% 50HZ 500W
l Operation Temperature: -10C°~40ºc
l Tank Capacity: 4L
l Test Tube Capacity: 120CC
l Ultrasonic Frequency: 40KHZ
l Rotation Speed: 0~10000r/min
l Step: 50r/min
l Time Counting Range: 0~10000 sec
l Step: 50 sec (adjustable)
l Oil Pump Pressure: 1.8kg/cm²----10kg/cm²
l Fuel Flow: 4.5 L/min
Turbo charger
1.IMPORTED VEHICLE : TOYOTA, HITACHI, MITSUBISHI, DEUTZ, CAT. MAN, IVECO, VOLVO, PERKINS, ISUZU,
MECEDES--BENZ, KATO, SUMITOMO, KOMATSU, KOBELCO. DAEWOO series…etc.
2.Gen-set: Cummins K&N series, NT855,K19, K38, L10, HITACHI, CAT, MITSUBISHI, KOBELCO/KATO etc..
3.DOMESTIC VEHICLE: steyr, Iveco, Hongyan, liberation, dongfeng, xichai, ShangChai, Cummins B.C series etc..
No.01 No.02
NO.01 PJ-40 NOZZLE TESTER NO.02 PS400A NOZZLE NO03 S60H Nozzle tester
TESTER
NO.04 (I,II,III) General Tool NO.05:P type pump Tools NO.06 VE pump Tool
NO.07 Tooth bar Travel Tester NO.08 Tooth bar travel rulers NO.09 Pre-Travel Gauge
NO.10 VE pump Piston Journey NO.11:PN, Pw, PB Tool NO.12 P7 pump Tool
tester and VE pump Pressure
tester
NO.40::Tear open P3000.P2000 NO.41: P type pump Clip Tool NO42:Caterpillar-Tool Injection Tool
P7100 Bearing Scratcher
NO.46: 5M pump Tool NO.47: 6110 Tear-Tool Gear NO48: Caterpillar Flange
Tool