Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
The calibration results reported above relate only to the instrument(s) calibrated. Measurement uncertainties were budgeted and calculated using
the ISO Guide to the Expression of Uncertainty in Measurement (GUM). Reported uncertainities represent expanded uncertainties expressed at
approximately the 95% confidence level using a coverage factor of k=2. Unless otherwise stated, a Test Uncertainty Ratio (TUR) of 4:1 or greater
was used. If .6R is used as a floor value in the uncertainty listed, R represents the resolution of the instrument under test. Measurement
uncertainty was not taken into account when determining if the instrument under test was within the tolerance limits specified above.
Standards used for this calibration are traceable to NIST, or another N.M.I. This calibration is in accordance with ISO/IEC 17025, ISO Guide 25,
ANSI/NCSL Z540-1, ISO 9000 and MIL. Std. 45662A. This calibration certificate shall not be reproduced except in full without written permission
from Massachusetts Metrology and Instrument Service.
Page 1 of 1
One Liberty Square - Rockland, MA 02370 Phone: 781-982-7125 Fax: 781-982-7152 Certificate Number: 235206