Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
0
Photo Modules for PCM Remote Control Systems
Description
The TFMS 5..0 – series are miniaturized receivers for in-
frared remote control systems. PIN diode and GND
preamplifier are assembled on lead frame, the epoxy VS OUT
package is designed as IR filter.
94 8691
The demodulated output signal can directly be decoded
by a microprocessor. The main benefit is the reliable
function even in disturbed ambient and the protection
against uncontrolled output pulses.
Features
D Photo detector and preamplifier in one package D Improved shielding against electric field
D Output active low disturbance
(active high modules: TFMS 5..9) D 5 Volt supply voltage, low power consumption
D Internal filter for PCM frequency D TTL and CMOS compatibility
D High immunity against ambient light x
D Continuous transmission possible (tpi/T 0.4)
Block Diagram
2
VS
Input Control
100 kW
Circuit
3
OUT
PIN
Band Demodu-
AGC Pass lator
1
GND
94 8136
Basic Characteristics
Tamb = 25_C
Parameter Test Conditions Symbol Min Typ Max Unit
Supply
pp y Current ((Pin 2)) VS = 5 V, Ev = 0 ISD 0.4 0.5 0.8 mA
VS = 5 V, Ev = 40 klx, sunlight ISH 1.0 mA
Transmission Distance Ev = 0, test signal see fig.7, d 35 m
IR diode TSIP5201, IF = 1.5 A
Output Voltage Low (Pin 3) IOSL = 0.5 mA,Ee = 0.7 mW/m2, VOSL 250 mV
f = fo, tp/T = 0.4
Irradiance (30 – 40 kHz) Pulse width tolerance: Ee min 0.3 0.5 mW/m2
tpo=tpi±160ms, test signal (see fig.7)
Irradiance (56 kHz) Pulse width tolerance: Ee min 0.4 0.7 mW/m2
tpo=tpi±160ms, test signal (see fig.7)
Irradiance Ee max 20 W/m2
Directivity Angle of half transmission distance ϕ1/2 ±55 deg
Application Circuit
330 W *) +5 V **)
4.7 mF *)
2
>10 kW
TFM. 5..0
optional
TSUS 5...
3 mC
TSIP 5...
1
94 8137
GND
*) only necessary to suppress power supply disturbances
**) tolerated supply voltage range : 4.5 V<VS <5.5V
2.0
0.8 f ( E ) = f0
1.6
0.6
1.2
0.4
0.8
0.2
f = f0 "5% 0.4
Df ( 3 dB ) = f0 / 10
0.0 0.0
0.7 0.8 0.9 1.0 1.1 1.2 1.3 0.0 0.4 0.8 1.2 1.6 2.0
94 8143 f / f0 – Relative Frequency 94 8147 E – Field Strength of Disturbance ( kV / m )
Figure 1. Frequency Dependence of Responsivity Figure 4. Sensitivity vs. Electric Field Disturbances
1200 100
Ee min – Threshold Irradiance ( mW/m2 )
t po – Output Pulse Length ( m s )
800 10
600 10 kHz
400 1
l = 950 nm, Optical Test Signal, Fig.7 100 Hz
200
0 0.1
0.1 1.0 10.0 100.0 0.1 1 10 100 1000
94 8145 Ee – Irradiance ( mW / m2 ) 94 8148 DVs RMS – AC Voltage on DC Supply Voltage ( mV )
Figure 2. Sensitivity in Dark Ambient Figure 5. Sensitivity vs. Supply Voltage Disturbances
100.0 1.0
Ee min – Threshold Irradiance ( mW/m2 )
^
Correlation with Ambient Light Sources
^
( Disturbance Efect ) : 1 0W/m2 1.4 klx Sensitivity in dark Ambient
( Stand.Illum.A, T = 2855 K ) 8.2 klx 0.8
( Daylight, T = 5900 K )
10.0
0.6
0.4
1.0
0.2
Ambient, l = 950 nm
0.1 0.0
0.01 0.1 1.0 10.0 100.0 –30 0 30 60 90
94 8146 E – Irradiance ( W / m2 ) 94 8149 Tamb – Ambient Temperature ( °C )
fx
–40
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems
with respect to their impact on the health and safety of our employees and the public, as well as their impact on
the environment.
It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as
ozone depleting substances ( ODSs).
The Montreal Protocol ( 1987) and its London Amendments ( 1990) intend to severely restrict the use of ODSs and
forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban
on these substances.
TEMIC TELEFUNKEN microelectronic GmbH semiconductor division has been able to use its policy of
continuous improvements to eliminate the use of ODSs listed in the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively
2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental
Protection Agency ( EPA) in the USA
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively.
TEMIC can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain
such substances.
We reserve the right to make changes to improve technical design and may do so without further notice.
Parameters can vary in different applications. All operating parameters must be validated for each customer
application by the customer. Should the buyer use TEMIC products for any unintended or unauthorized
application, the buyer shall indemnify TEMIC against all claims, costs, damages, and expenses, arising out of,
directly or indirectly, any claim of personal damage, injury or death associated with such unintended or
unauthorized use.