Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
CATALOGUE
Content
IRT 4
WMR 6
WST SB 10
SF 12
PB 14
KD 16
K/KA KB/KBA 18
KBJ/KBJA 20
BM/BMA 22
ECM 24
3
Irrigation &
Agriculture Water
Meter
Model IRT
Description
Special design with free water passage allows measurement of water with high contents of impurities.
Features
■■ Negligible loss of head
■■ Simple maintenance
■■ Field replaceable measuring unit
■■ Hermetically sealed register with glass lens
■■ Bearings are constantly flushed during operation to eliminate deposit of solids
■■ Optional electrical output: EV (Volume) or EF (Rate of Flow)
■■ Compatible with Dialog® automatic reading system
Applications
Irrigation and sewerage metering
Available Sizes
3" - 10” (80mm – 250mm)
Technical Specifications
Maximum Working Pressure 16 bar
4
Performance data
Dimensions
5
Irrigation &
Agriculture Water
Meter
Model WMR
Description
The ample space around the core of the in-line helical axial turbine allows foreign matter to pass through the meter without clogging.
Features
■■ Minimum loss of head
■■ High accuracy
■■ Hermetically sealed register with glass lens
■■ Optional electrical output: EV (volume), EF (rate of flow) or DIALOG
■■ Not sensitive to dirt
Applications
For main supply lines, agriculture and industry
Available Sizes
2" (50mm) TAMBIEN EN 1 1/2"
(38mm)
Standards
ISO 4064, EEC
Technical Specifications
Maximum Working Pressure Standard - 16 bar
6
Performance data
Dimensions
7
Woltman
Silver Turbo
Water Meter - Model WST SB
Description
The new Woltman Silver Turbo – WST is the latest state of the art meter developed by ARAD’s R&D department.
Advanced methods and technologies were implemented in order to present a product much superior to those found in the market today.
Features
■■ In addition to the features offered by Arad’s traditional Woltman Turbine meter, the Woltman Silver Turbo (WST) offers the following:
■■ Accuracy – The WST’s accuracy curve is the widest known in the market: The minimum flow rate is 35%-58% below the ISO standard
for such meters and the maximum flow rate is 150%-233% above it. The combination of these unique features allows the use of the
WST in broader applications and in extreme situations. High accuracy at very low flow rate assures minimize losses of unmeasured
water (R-160)
■■ Wide measuring rate - possible to measure very high flow rate
■■ No sensitivity to working conditions like vibrations
■■ No sensitivity to humidity conditions (even if dry chamber is full of water)
■■ The worm assy. is in a separate kit, which enable easy replacement if necessary
■■ Easy assembly process
■■ Resistance – Bearings and materials used in the WST have been proved to ensure durability far beyond the ISO Standard requirement.
This feature ensures that the meter can function in extreme conditions where other meters fail to maintain a sufficient level of
accuracy.Longer life expectancy than similar meters in the market
■■ Magnetic Coupling – The WST, like its predecessor, the Woltman Turbo meter - has a unique measuring unit, in which only one moving
element, the impeller, is in contact with the water. The other moving components, including the worm & transmission gear, are kept
sealed inside a dry compartment and have no contact with any of the abrasive elements present in the water.
■■ WST has repelling magnets installed in the impeller and the transmitting gear, instead of the attracting magnets installed in the WT
■■ Compatibility – The WST is also available with EV, EF, Dialog 2G, Dialog 3G, MPE, DPE etc. The WST’s measuring unit can be installed
in any of the existing Arad WT models.
Applications
Water supply networks, agricultural applications and industrial use.
Available Sizes
2” - 8” (50mm - 200mm)
Standards
ISO 4064, AWWA, EEC
Technical Specifications
Maximum Working Pressure Standard - 16 bar Upon request – 25 bar
8
Performance data
Dimensions
9
Plastic
Fertilizer Meter
Model SF
Description
The SF is a fertilizer & chemical solutions meter with electrical output and a totalizing register.
The impeller is the only moving part, inside the meter, that comes into contact with the liquid.
Features
■■ Mechanical register with totalizer, 3 pointers and leakage detector
■■ High accuracy.
■■ Corrosion resistant plastic components.
■■ Small & lightweight.
Applications
■■ Fertilizing control in automated irrigation systems.
■■ Industrial applications involving corrosive liquids.
Available Sizes
1/2” (15mm)
Technical Specifications
Maximum Working Pressure 5 bar
Body PPS
10
Performance data
Dimensions
1. SF Fertilizer Meter
2. Irrigation computer
3. Fertilizer tank
4. Hydraulic valve
5. Water meter
6. Hydraulic valve
7. Flow limiter valve
8. Fertilizer Pump
9. 75 mm damping pipe
11
Plastic Body
Liquid Chemical
Meter
Model PB
Description
The PB is an angle type, plastic body, multi-jet liquid chemical meter.
Features
■■ The impeller is corrosion resistant and is the only moving element that comes in contact with the liquid.
■■ Electrical output (EV).
Applications
Measuring flow of fertilizer solutions, for agriculture, distilled water, seawater and many other diluted solutions.
Available Sizes
3/4” - 1” (20 - 25mm)
Technical Specifications
Maximum Working Pressure 10 bar
Body PVC
Connection 1” BSP
12
Performance data
Dimensions
Installation Requirements
The meter should be installed with dial face in horizontal position.
13
DISHNON
Fertilizer meter with
electrical output - Model KD
Description
The DISHNON is a small meter, which is resistant to fertilizer and similar chemicals and which transmits electrical data to automated control
systems. The DISHNON contains a small measuring chamber and a magnetic proximity switch made of synthetic polymers and metals capable of
withstanding all fertilizer materials currently in common use.
Features
■■ Compatible with virtually any type of automated control system
■■ High accuracy
■■ Dry contact electrical output
■■ Corrosion resistant plastic and metal components
Applications
■■ Automated irrigation systems
■■ Automated industrial applications using corrosive liquids
Available Sizes
1/2” (15mm)
Technical Specifications
Maximum Working Pressure 5 bar
14
Performance data Electrical output data
Dimensions
15
DOSE-O-MAT
Automatic Metering Valve
Model K/KA, KB/KBA
Description
■■ The Dose-O-Mat line of automatic metering valves provides a reliable and economical solution for a wide variety of irrigation
applications.
■■ A variety of models and sizes are available to meet virtually any operational requirements and budget.
■■ The desired quantity is set using the volume control dial, according to local crop and soil. It automatically closes the valve once the
pre-set quantity of water has passed through the unit.
■■ Dose-O-Mat units of sizes 11/2" and larger, contain hydraulic valves and may be installed either as single points of control or in groups
that are operated in sequence.
■■ Operation is extremely simple, it does not require neither skilled labor nor intensive training.
Features
■■ Simple to operate and maintain – just set it & forget about it.
■■ High accuracy.
■■ Rugged, heavy-duty construction.
■■ Immune to fluctuations in line pressure.
■■ Low loss of head.
■■ Up to 30% saving compared to time based irrigation.
■■ Wide variety of models & sizes – suitable for virtually all irrigation applications.
■■ Can function together with other units as part of an automatic, sequential irrigation system.
Available Sizes
K/KB - Globe type 3/4”, 1”, 11/2”, 2”, 3”
Technical Specifications
Maximum Working Temperature 60°C
K 3/4” - 1” plastic
Body
All other models - cast iron
K 3/4” - 3/4” BSPT male thread
K 1” - 1 BSPT male thread
Connection K/KB 11/2” - 11/2” male thread with coupling
K/KB 2” - 2” male thread with coupling - Internal thread BSPT or NPT
KB 3” - Cast-iron flanges meeting BS 10, ISO, AWWA, JIS10.
16
Performance data
Dimensions
17
DOSE-O-MAT
Automatic Metering Valve
Model KBJ/KBJA
Features
■■ Simple to operate and maintain - just set it & forget about it.
■■ High accuracy.
■■ Rugged, heavy-duty construction.
■■ Immune to fluctuations in line pressure.
■■ Low loss of head.
■■ Up to 30% saving compared to time based irrigation.
■■ Wide variety of flow and pressure regulation options.
■■ Wide variety of models & sizes - suitable for virtually all irrigation applications.
■■ Can function together with other units as part of an automatic, sequential irrigation system.
Description
■■ The Dose-O-Mat line of automatic metering valves provides a reliable and economical solution for a wide variety of irrigation
applications.
■■ A variety of models and sizes are available to meet virtually any operational requirements and budget.
■■ The desired quantity is set using the volume control dial, according to local crop and soil. It automatically closes the double chambered
valve once the pre-set quantity of water has passed through the unit.
■■ Dose-O-Mat units that are 11/2" and larger contain a hydraulic double chamber valve and may be installed either as single points of
control or in groups that operate are in sequence.
■■ Operation is extremely simple, it does not require neither skilled labor nor intensive training.
Available Sizes
Technical Specifications
Maximum Working Pressure 16 Bar
18
Performance data
Dimensions
19
HYDROMETER
Model BM/BMA
Description
■■ The hydrometer combines a water meter and a hydraulic valve in a single unit.
■■ The valve is double-chambered and is especially designed for high-pressure operation.
■■ Pilot valves and solenoid valves enable remote and automatic transmission of hydraulic commands to the hydrometer.
■■ Hermetically sealed register.
■■ The impeller is the only moving part in contact with the water.
■■ The meter contains a rotating leakage indicator as well as a totalizer that displays cumulative volume.
■■ The meter electronically transmits flow data to the remote control computer.
■■ The hydrometer is available in globe type and angle type models in a variety of sizes.
Features
■■ Integrated design minimizes installation space.
■■ Specifically designed for use in automated remote control environments.
■■ Wide variety of flow and pressure regulation options.
■■ Double-chambered hydraulic valve designed for high-pressure operation.
■■ Rugged, heavy-duty construction.
■■ Low loss of head.
■■ Wide range of sizes - suitable for virtually any application
Standards
EEC approval (class A)
Applications
■■ The BM/BMA hydrometers series are designed for remote control irrigation and for industrial applications. The hydrometer is especially
suited for automated operation. The hydrometer may be used in a variety of pressure and flow regulation applications such as:
■■ Pressure sustaining & reducing
■■ Flow regulation
■■ Combined pressure and flow regulation
■■ Dual stage operation
Available Sizes
BM - Globe type 11/2”,2”,3”, 4”, 6”, 8”
Technical Specifications
Maximum Working Pressure 16 Bar
20
Performance data
Dimensions
Electrical output
21
Water Meters
with Electrical
Output
(All Types & Sizes) - Model ECM
Description
The constantly growing penetration of automation and computerized data processing into water usage, in agriculture, industry, urbanic water
supply systems and any other field where more is required than just the traditional mechanical register of water meters, creates a high demand
for measuring instruments which are able to provide electrical information about the flow.
Arad Water Meters equipped with electrical output devices combine the high reliability of the hermetically sealed, magnetically driven register
with a wide variety of electric output options.
All existing Arad Water Meters with magnetic registers can be easily upgraded to include electrical output.
Application Examples
1. Remote Reading
In combination with a remote reading system, or computerized data acquisition system, it is possible to collect and process water usage data in
multi-apartment houses, in places with no access, or wherever it is required to bring all data to one point.
2. Flowrate Measuring
With the appropriate type of electrical output it is possible to obtain on-line information about the flowrate which can be displayed, stored or both.
3. Flowrate Control
With the appropriate type of electrical output and additional electronic control device it is possible to perform various functions like the operation
of valves, pumps or alarm signals according to various preset levels of flowrate.
5. Batching
Feeding electrical output to a batching controller enables pre-setting and delivering of accurate volumes of water in irrigation systems, industrial
process etc.
2. “FLOWRATE” output - for functions related to the rate of change in the flowing volumes.
Transducer: Photo Diode
Designation: EF
22
Transducer Types - Description & Specifications
1. Reed Switch (EV) Sensor
A magnet activates this sensor. It acts as a “Dry Contact” and does not consume electric power. This is the most suitable sensor for “VOLUME”
related functions and in such applications its operating life is practically unlimited (ca. 108 cycles).
Electrical specifications:
a. Max. contact current - 50 Ma
b. Max. contact voltage - 28 VDC
Reed switches
23
Registers Types
1. REED-SWITCH - VOLUME OUTPUT
A 3 pointer register with magnet installed on one of them.
Output definition: “Volume output”. Output type: EV.
The reed switch sensor is installed in hermetically sealed transparent plastic cover that can be mounted
on the register in any one of 3 positions facing the pointer with the magnet.
3 values of output are thus available in 1:10:100 ratios.
24
General Remarks Concerning the Various Types of Electrical Outputs
1. All the sensors are mounted on the register in a non-invasive mode.
2. All types of outputs may be installed on all ARAD water meters.
3. All “Volume outputs” sensors of types EV and EV-D may be installed or replaced without disassembling the register.
25
06-0910-DRP-CT-0074-EN
WWW.NETAFIM.COM
E-MAIL: PRODUCTS_SOLUTIONS@NETAFIM.COM