Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
net/publication/301680107
CITATIONS READS
0 169
4 authors, including:
All content following this page was uploaded by Ross Jeffrey Haywood on 28 April 2016.
1.50
measurement locations respectively.
1.00
0.00
A1 A2 A3 A4 E4 E3 E2 E1
Location
Pump 1 (C and G)
Fine Mesh Physical Model
2.50
2.00
Velocity (m/s)
1.50
1.00
0.50
Horizontal axis
0.00
C1 C2 C3 C4 G4 G3 G2 G1
Location
IPS model predictions and design guidance contributing to swirling flow in the inlet headers.
Figures 5 and 6 illustrate the manner in which By modifying the design to utilise a flat bottom
the CFD investigation influenced the design (lower half of the figure) this swirling was nearly
cycle for the IPS. eliminated.
Figure 11. Treated Water Tank, flow Figure 13. Treated Water Tank, computed tracer
streamlines, as-built geometry. concentration at tank outlet, modified geometry.
T10 = time at which 10% of the tracer into the system has exited the outlet
T = Theoretical mean residence time (Tank Volume/Volume Flow Rate)
ACKNOWLEDGMENT