Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
3D TRASAR™ 3DT120
Restrictions on use : Refer to available product literature or ask your local Sales Representative for
restrictions on use and dose limits.
GHS Classification
Not a hazardous substance or mixture.
No hazardous ingredients
In case of eye contact : Rinse with plenty of water. Get medical attention if symptoms occur.
In case of skin contact : Wash off with soap and plenty of water. Get medical attention if symptoms
occur.
Protection of first-aiders : In event of emergency assess the danger before taking action. Do not put
yourself at risk of injury. If in doubt, contact emergency responders. Use
personal protective equipment as required.
1/8
SAFETY DATA SHEET
3D TRASAR™ 3DT120
Most important symptoms : See Section 11 for more detailed information on health effects and symptoms.
and effects, both acute and
delayed
Suitable extinguishing media : Use extinguishing measures that are appropriate to local circumstances and the
surrounding environment.
Hazardous combustion : Decomposition products may include the following materials: Carbon oxides
products Sulphur oxides
Specific extinguishing : Fire residues and contaminated fire extinguishing water must be disposed of in
methods accordance with local regulations.
Methods and materials for : Stop leak if safe to do so. Contain spillage, and then collect with non-
containment and cleaning up combustible absorbent material, (e.g. sand, earth, diatomaceous earth,
vermiculite) and place in container for disposal according to local / national
regulations (see section 13). Flush away traces with water. For large spills, dike
spilled material or otherwise contain material to ensure runoff does not reach a
waterway.
Advice on safe handling : For personal protection see section 8. Wash hands after handling.
Conditions for safe storage : Keep out of reach of children. Keep container tightly closed. Store in suitable
labelled containers.
Suitable material : The following compatibility data is suggested based on similar product data
and/or industry experience: Shipping and long term storage compatibility with
construction materials can vary; we therefore recommend that compatibility is
tested prior to use.
2/8
SAFETY DATA SHEET
3D TRASAR™ 3DT120
Engineering measures : Good general ventilation should be sufficient to control worker exposure to
airborne contaminants.
Hygiene measures : Wash hands before breaks and immediately after handling the product.
Appearance : Liquid
Colour : yellow
Odour : odourless
Flash point : does not flash
pH : 2.4 - 3.6,(100 %), (25 °C)
Odour Threshold : no data available
Melting point/freezing point : POUR POINT: -2.0 °C
Initial boiling point and boiling : no data available
range
Evaporation rate : no data available
Flammability (solid, gas) : no data available
Upper explosion limit : no data available
Lower explosion limit : no data available
Vapour pressure : no data available
Relative vapour density : no data available
Relative density : 1.113 - 1.149,
Density : no data available
Water solubility : completely soluble
Solubility in other solvents : no data available
Partition coefficient: n- : no data available
octanol/water
Auto-ignition temperature : no data available
Thermal decomposition : no data available
Viscosity, dynamic : no data available
Viscosity, kinematic : 39.93 - 42.69 mm2/s (20 °C)
Molecular weight : no data available
VOC : no data available
3/8
SAFETY DATA SHEET
3D TRASAR™ 3DT120
Incompatible materials : Contact with strong oxidizers (e.g. chlorine, peroxides, chromates, nitric acid,
perchlorate, concentrated oxygen, permanganate) may generate heat, fires,
explosions and/or toxic vapors.
Bases
Contact with strong alkalies (e.g. ammonia and its solutions, carbonates, sodium
hydroxide (caustic), potassium hydroxide, calcium hydroxide (lime), cyanide,
sulfide, hypochlorites, chlorites) may generate heat, splattering or boiling and
toxic vapors.
SO2 may react with vapors from neutralizing amines and may produce a visible
cloud of amine salt particles.
Eyes : Health injuries are not known or expected under normal use.
Skin : Health injuries are not known or expected under normal use.
Ingestion : Health injuries are not known or expected under normal use.
Inhalation : Health injuries are not known or expected under normal use.
Chronic Exposure : Health injuries are not known or expected under normal use.
Toxicity
Product
Acute oral toxicity : no data available
Acute inhalation toxicity : no data available
4/8
SAFETY DATA SHEET
3D TRASAR™ 3DT120
Ecotoxicity
Product
Toxicity to fish : LC50 Oncorhynchus mykiss (rainbow trout): > 8,000 mg/l
Exposure time: 96 hrs
Test substance: Product
Test Type: Static
Toxicity to daphnia and other : LC50 Daphnia magna (Water flea): 1,339 mg/l
aquatic invertebrates Exposure time: 48 hrs
5/8
SAFETY DATA SHEET
3D TRASAR™ 3DT120
Mobility
The environmental fate was estimated using a level III fugacity model embedded in the EPI (estimation program
interface) Suite TM, provided by the US EPA. The model assumes a steady state condition between the total
input and output. The level III model does not require equilibrium between the defined media. The information
provided is intended to give the user a general estimate of the environmental fate of this product under the
defined conditions of the models.
If released into the environment this material is expected to distribute to the air, water and soil/sediment in the
approximate respective percentages;
Air : <5%
Water : 10 - 30%
Soil : 70 - 90%
Bioaccumulative potential
Other information
6/8
SAFETY DATA SHEET
3D TRASAR™ 3DT120
The hazard characterization is based on the tests or potential hazard in the clean water.
The shipper/consignor/sender is responsible to ensure that the packaging, labeling, and markings are in
compliance with the selected mode of transport.
Land transport
FOOD AND DRUG ADMINISTRATION (FDA) Federal Food, Drug and Cosmetic Act :
When use situations necessitate compliance with FDA regulations, this product is acceptable under : 21 CFR
176.170 Components of paper and paperboard in contact with aqueous and fatty foods and 21 CFR 176.180
Components of paper and paperboard in contact with dry foods. The following limitations apply:
50 PPM
For use only as a scale inhibitor (including use as a manganese dispersant) at a maximum level of 25 ppm in the
process water used in the manufacture of paper and paperboard. When used as evaporation deposit control
material in the bioethanol dry grind milling process. When used as evaporation deposit control material in corn
wet mill processing This product is not intended for use in the production of feed products for companion
animals. If this product is not used strictly in accordance with these guidelines, adulteration of animal feeds could
result.
7/8
SAFETY DATA SHEET
3D TRASAR™ 3DT120
NSF NON-FOOD COMPOUNDS REGISTRATION PROGRAM (former USDA List of Proprietary Substances &
Non-Food Compounds) :
NSF Registration number for this product is : 141583
This product is acceptable for treatment of cooling and retort water (G5) in and around food processing areas.
This product is acceptable for treating boilers, steam lines, and/or cooling systems (G7) where neither the
treated water nor the steam produced may contact edible products in and around food processing areas.
REVISED INFORMATION: Significant changes to regulatory or health information for this revision is indicated by
a bar in the left-hand margin of the SDS.
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and
belief at the date of its publication. The information given is designed only as a guidance for safe handling,
use, processing, storage, transportation, disposal and release and is not to be considered a warranty or
quality specification. The information relates only to the specific material designated and may not be valid for
such material used in combination with any other materials or in any process, unless specified in the text.
8/8