Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Chemical Division
MAXFLOC® T
“CATIONIC POLYELECTROLYTE”
DESCRIPTION
Maxfloc® T is a liquid cationic polyelectrolyte. It is a medium molar mass, high
charge density polymer.
BENEFITS
Liquid product
Readily soluble in water
Unaffected by pre-chlorination
Accepted for use in drinking water clarification
Approved by National and International Toxicology Centres.
Low storage cost and low bulk handling cost
Eliminates lime usage if used for pH neutralization
Reduction in alum consumption
Low dose required as compared to conventional coagulants
Faster settling and more filterable flocs
Reduces carryover of aluminium and iron ions
Helps in coagulation of colloidal silica
Reduces sludge quantity due to sludge volume compaction
APPLICATION & DOSAGE
Dissolve 1 ml of Maxfloc® T (as supplied) in one liter of
distilled water; stir well to ensure homogeneous solution.
This yields standard solution, 1 ml of this standard
solution when added to 1 liter of water sample under
study provides 1 ppm concentration/dose of Maxfloc® T.
For plant purpose 1% concentration of Maxfloc® T is
recommended. It is added in high turbulence areas in the
plant to ensure high mixing energy and better contact of
coagulant with the impurities in water. It is recommended
to use plastic or rubber lined containers equipped with
stirrer and metering pump.
PACKING
Maxfloc® T is available in 50 kg carboys.
Chemicals
We reserve the rights to amend any product details without notice ©Copyright, Thermax Ltd. Power
TCD/PMG/PPG/MXFT/NOV2012, REV 00