Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Project Proposal
GROUP MEMBERS:
MUHAMMAD HAMZA-(070)
AMMAD-UD-DIN-(062)
The input end of a WDM is a coupler that combines all the inputs into
one output fiber. WDMs often have many inputs. Demultiplexing
involves taking the input fiber, and collimating the light into a narrow,
parallel beam of light. The light shines on a grating, which separates
the light into the different wavelengths by sending them off at
different angles. The grating is a mirror like device that works like a
prism. The optics capture and focus each wavelength into a fiber to
create separate outputs for each wavelength of light.
PAGE 1
There are several advantages of using
WDM:
Individual wavelengths can be from a normal link so current
equipment can be used. Laser transmitters must be chosen to
match the WDM demultiplexer so each channel is properly decoded
at the receiving end.
Future enhancements are expected to offer 80-128 channels.
Digital signals can be mixed and matched.
Implementation:
We will Implement the system of wavelength multiplexing and
demultiplexing on the software “OPTISYSTEM”.
We will use the multiplexer MUX 4*1.
We have planned to use MZ modulator but that is not fixed. While
implementing we will test other modulators as well.
In this whole project, we have aimed to achieve a good Q-Factor.
PAGE 2