Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
com/polymer-properties/properties/max-continuous-service-
temperature
This is the maximum acceptable temperature above which mechanical properties (tensile strength,
impact strength) or electrical properties (dielectric strength, linked to insulation properties) of a
plastic part are significantly degrading, over the reasonable life time of the tested product.
UL 746 is the test method generally used to calculate Relative Temperature Index (RTI).
Name of the
Explicit name of the polymer Min Value(°C) Max Value(°C)
polymer
Acrylonitrile-Butadiene
ABS/PC 70.000 110.000
Styrene/Polycarbonate
Acrylonitrile-Butadiene
ABS/PC 20% GF 70.000 110.000
Styrene/Polycarbonate 20% glass fiber
Acrylonitrile-Butadiene
ABS/PC FR 70.000 110.000
Styrene/Polycarbonate flame retardant
Acrylonitrile Styrene
ASA/PC 90.000 110.000
Acrylate/Polycarbonate
Acrylonitrile Styrene
ASA/PC FR 90.000 110.000
Acrylate/Polycarbonate flame retardant
CP - Cellulose
Cellulose Proprionate 60.000 105.000
Proprionate
CPVC - Chlorinated
CPVC - Chlorinated Polyvinyl Chloride 80.000 100.000
Polyvinyl Chloride
PA 66 30% mineral
Polyamide 6-6 30% mineral filled 120.000 140.000
filled
PA 66 impact
Polyamide 6-6 impact modified 80.000 130.000
modified
Polycarbonate/Polybutylene
PC/PBT 60.000 121.000
Terephthalate blend
Polycarbonate/Polybutyleneterphtalate
PC/PBT glass filled 121.000 193.000
blend glass filled
PCL -
Polycaprolactone 45.000 45.000
Polycaprolactone
PP 10-40% mineral
Polypropylene 10-40% mineral filled 100.000 130.000
filled
PPA – 33% glass fiber Polyphthalamide – 33% glass fiber 184.000 186.000
PPA – 45% glass fiber Polyphthalamide– 45% glass fiber 184.000 186.000
SMA 20% GF Styrene Maleic Anhydride 20% glass fiber 75.000 100.000
XLPE - Crosslinked
XLPE - Crosslinked Polyethylene 110.000 130.000
Polyethylene
Disclaimer: all data and information obtained via the Polymer Selector including but not limited to
material suitability, material properties, performances, characteristics and cost are given for
information purpose only. Although the data and information contained in the Polymer Selector are
believed to be accurate and correspond to the best of our knowledge, they are provided without
implied warranty of any kind. Data and information contained in the Polymer Selector are intended
for guidance in a polymer selection process and should not be considered as binding specifications.
The determination of the suitability of this information for any particular use is solely the
responsibility of the user. Before working with any material, users should contact material suppliers
in order to receive specific, complete and detailed information about the material they are
considering. Part of the data and information contained in the Polymer Selector are genericised
based on commercial literature provided by polymer suppliers and other parts are coming from
assessments of our experts.
Copyright SpecialChem SA