Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
SIGNS
PART 1 - GENERAL
1.1. SUMMARY
1. Panel signs.
2. Dimensional characters (letters and numbers).
3. Illuminated characters (letters and numbers).
4. Signage accessories.
1.2. SUBMITTALS
B. Shop Drawings: Include plans, elevations, sections, details, wiring diagrams, and
attachments to other Work.
C. Samples: For each sign material indicated that involves color selection.
A. Regulatory Requirements: Comply with the Americans with Disabilities Act (ADA)
and with code provisions as adopted by authorities having jurisdiction.
PART 2 - PRODUCTS
A. Aluminum Backings
A. Text pictograms and graphics shall be as shown on drawings. Text, pictogram and
graphics will be screen printed.
A. General: Provide panel signs that comply with requirements indicated for
materials, thicknesses, finishes, colors, designs, shapes, sizes, and details of
construction.
B. Aluminum Sheet and Plate: ASTM B 209 (ASTM B 209M), alloy and temper
recommended by aluminum producer and finisher for type of use and finish
indicated, and with not less than the strength and durability properties of 5005-
H15.
1. Material: Aluminum.
D. Brackets: Fabricate brackets and fittings for bracket-mounted signs from extruded
aluminum to suit panel sign construction and mounting conditions indicated.
Factory-paint brackets in color matching background color of panel sign.
E. Graphic Content and Style: Provide sign copy that complies with requirements
indicated on Drawings for size, style, spacing, content, mounting height and
location, material, finishes, and colors of signage.
1. Furnish paper and software for creating text and symbols for computers for
Owner production of paper inserts.
G. Engraved Copy: Machine engrave letters, numbers, symbols, and other graphic
devices into panel sign on face indicated to produce precisely formed copy,
incised to uniform depth.
B. Stainless-Steel Plate, Sheet, and Strip: Provide stainless-steel plate, sheet, and
strip, Type 302 or Type 304, complying with ASTM A 666.
1. Stainless-Steel Sheet: Not less than 0.050 inch (1.27 mm) thick for face
and 0.031 inch (0.80 mm) thick for returns.
2.5 ACCESSORIES
B. Mounting Methods: Use concealed fasteners fabricated from materials that are
not corrosive to sign material and mounting surface. Refer to I.D. drawings for
mounting locations.
PART 3 - EXECUTION
3.1 INSTALLATION
A. General: Locate signs and accessories where indicated, using mounting methods
of types described and in compliance with manufacturer's written instructions.
1. Install signs level, plumb, and at heights indicated, with sign surfaces free
from distortion and other defects in appearance.
B. Wall-Mounted Panel Signs: Attach panel signs to wall surfaces using methods
indicated below:
1. Flush Mounting: Mount characters with backs in contact with wall surface.
D. Illuminated Characters:
END OF SECTION