Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
siemens.com/steamturbines
Siemens SST-6000 series Overview
Siemens Steam Turbines of the SST-6000 series are
widely operated in coal-fired steam power plants with
A broad range of turbine modules meet individual Preassembled modules reduce coordination a power output up to 1,200 MW and an steam turbine
requirements of power ratings and steam parameters. effort, on-site assembly times, and technical risk. efficiency up to more than 53.7%.
The modularized design secures technical replicability. Highest reliability and availability are proven by a Products of the SST-6000 series consist of a high-pres-
For each project, Siemens customizes the turbine forced outage rate that is less than half the North sure (HP) turbine, an intermediate-pressure (IP) turbine,
train and blade path to ensure optimal performance. American Electric Reliability Council (NERC) and up to three low-pressure (LP) turbines for 50 and 60
average. Hz.
Double Reheat
3 3
On the path to increased efficiency, Siemens double
2 reheat technology is one smart step towards achiev-
ing 54.4% efficiency. It is the optimal solution for
1
applications used in steam power plants with a power
6 output between 1,000 and 1,350 MW.
4
Customer Benefits
Power output: 300 MW to 1,200 MW Reheat steam conditions for single and
(Double reheat 1,000 MW to 1,350 MW) double reheat: 50 Hz 60 Hz
Temperature up to 630 °C / 1,166 °F
Efficiency: more than 53.7% Apparent 600 MVA to 600 MVA to
(Double reheat 54.4%) power 1,300 MVA 1,270 MVA
2 2
4
5
3
Minor Minor
Inspection
Medium Inspection
Inspection Major
Inspection
First opening
*EOH = Equivalent Operating Hours of Steam Turbine
Modules
**Estimated values (base load)
***Depending on shift mode and customer requirements Auxiliaries
Not only the pre-assembled core turbine modules
but also the provided auxiliary systems are designed
Medium Inspection Major Inspection for maximum customer value:
Minor Inspection
Lube oil system, seal oil system, seal steam system,
Visual inspection of accessible components including evacuation system, hydrogen system, and additional
condenser systems.
Alignment checks
4
2
3
1
5
6