Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
| Brother
Imprimir | Fechar
DCP-1617NW
My Brother machine could not be found over the network when I installed
drivers on my PC.
If the above message appears, verify the following points to resolve the issue.
NOTE: Illustrations are from a representative product and operating system, and may differ from your Brother machine and
operating system.
Verify that all devices on the network where your PC and the Brother machine are connected work correctly.
Verify the network devices and connection cables on the network (only for a wired connection).
The network devices and connection cables on the network where your PC and the Brother machine are connected
may not work correctly. Verify the Link LED of your router or hub to make sure they work without any problems.
If the Link LED turns on or blinks, the network devices and connection cables work correctly. Go to the next
point.
If the Link LED does not turn on or blink, the network devices or connection cables have problems. Connect the
network cable to other ports or use another network cable.
Turn off the router or switching hub and turn it back on.
Your router or switching hub may not work correctly if you re-connect the cable or change the IP address many times
over, even though all settings of IP address are correct. Turn off the router or switching hub and turn it back on, this will
https://support.brother.com/g/b/faqendbranchprintable.aspx?c=br&lang=pt&prod=dcp1617nw_us&faqid=faq00010178_008&ot=us_ot&printable=tr… 1/4
22/11/2019 My Brother machine could not be found over the network when I installed drivers on my PC. | Brother
Verify the security settings of access points (only for a wireless connection).
Access points you are going to connect your PC or the Brother machine to may have the security settings set for
restricting access.
Configure your wireless computer and Brother machine with the same SSID as used for your WLAN access
point/router.
Disable Privacy Separator.
If you are using MAC address filtering in the WLAN access point/ router, you need to configure your MAC
address of your Brother machine.
> Click here to see "Function settings of your WLAN access point" section in another FAQ and verify the settings.
Verify the settings of all broadband routers and access points (only if a few broadband routers exist on the
network).
The settings of all broadband routers and access points may not be configured correctly if more than two broadband
routers that have several LAN ports exist on the network as below. Verify that the settings of all broadband routers and
access points are configured correctly.
For the detail of changing bridge mode (Off the DHCP function etc.) of broadband routers, contact
your broadband routers' manufacturer with the following information or refer to the manuals provided
with your broadband router.
Your Brother machine could not be found over the network from your PC.
Your PC can access the internet.
Your Brother machine can connect to the broadband router.
Windows Users
Macintosh Users
Windows Users
If Windows Firewall or firewall function of security software is active, it may be rejecting the necessary network connection.
Change the firewall settings by creating a firewall rule to block except settings or disabling the firewall on your computer.
Your computer's firewall/security software may be preventing the network connection from being established.
If you receive firewall-related notifications, we recommend temporarily changing the security settings on your
computer to establish the connection.
https://support.brother.com/g/b/faqendbranchprintable.aspx?c=br&lang=pt&prod=dcp1617nw_us&faqid=faq00010178_008&ot=us_ot&printable=tr… 2/4
22/11/2019 My Brother machine could not be found over the network when I installed drivers on my PC. | Brother
IMPORTANT
Before disabling the firewall, make sure the changes you want to make are suitable for your network.
Brother will not take any responsibility for any consequences of disabling the firewall.
When finished, make sure to turn the firewall on again.
After you have finished verifying the above points, try re-installing the driver (Full Driver & Software Package) and verifying
whether the devices could be found or not.
If you configure the IP address manually, check Custom Install when you select the network connection and
enter the IP address for Specify your machine by address (Advanced Users) when the Network Search Type
window appears.
https://support.brother.com/g/b/faqendbranchprintable.aspx?c=br&lang=pt&prod=dcp1617nw_us&faqid=faq00010178_008&ot=us_ot&printable=tr… 3/4
22/11/2019 My Brother machine could not be found over the network when I installed drivers on my PC. | Brother
Macintosh Users
Before disabling the firewall, make sure you understand the risks involved. Brother will not take any
responsibility for what happens to you when disabling the firewall. Please be careful when you change the
settings to the most appropriate ones for your environment.
After you have finished verifying the above points, try re-installing the driver (Full Driver & Software Package) and verifying
whether the devices could be found or not.
https://support.brother.com/g/b/faqendbranchprintable.aspx?c=br&lang=pt&prod=dcp1617nw_us&faqid=faq00010178_008&ot=us_ot&printable=tr… 4/4