Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
the extreme intensities of stress when the hook regard, will be entertained after the examination.
carries a load of 12.5 kN, the load line passing
Note : Attempt Five questions in all, selecting at
50 mm from the inside edge of the section
least one question from each Unit. All
and the centre of curvature being in the load
line. 15 questions carry equal marks.
6 N/mm2. Determine the stress in the material. (c) Maximum strain energy theory,
Now if the external pressure is doubled, what if the stress at elastic limit is 200N/mm2, Factor
internal pressure can be maintained without of safety is equal to 2 and Poisson ratio is
exceeding the previously determined maximum 0.25. 15
stress ? 15
Unit III
Unit II
5. A disc of uniform thickness and of 600 mm
3. A hollow shaft subjected to a pure toque, diameter rotates at 1800 rpm. Find the
attains a maximum shearing stress t. Given maximum stress developed in the disc. If a
that the strain energy stored per unit volume is hole of 100 mm diameter is made at the centre
M-D-33 2 (3-53/19)M-D-33 3 P.T.O.
8. Drive an expression for strain energy of a 8. Drive an expression for strain energy of a
laminated spring. 5 laminated spring. 5
A laminated spring 1 m long is to A laminated spring 1 m long is to
support central load of 5.8 kN. If support central load of 5.8 kN. If
the maximum stress should not exceed the maximum stress should not exceed
300 MN/m2, calculate : 300 MN/m2, calculate :
(a) Thickness of leaves (a) Thickness of leaves
(b) Their number if each plate is 80 mm (b) Their number if each plate is 80 mm
wide. wide.
Take E = 200 GN/m2. 10 Take E = 200 GN/m2. 10