Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Select Region
Global
Europe
Japan
China
Asia
Taiwan
Korea
Font Size
Small
Medium
Large
Custom Search
Home
HMI
Company profile
» Products
» Support
» FAQ
» Distributors
1. Home >
2. FAQ
date: 2018/12/17
V9 series
Cannot make entries with a keypad.
V8 series
<Solutions>
"The port cannot be opened."
1. Set the function of the numerical data display or character display part to be
input through the keypad as [Entry Target].
How to save sampling data
even after turning off the V
series
https://monitouch.fujielectric.com/site/faq-e/qa/23 1/3
10/12/2019 FAQ | HMI MONITOUCH
2. In the case of numerical data display parts, display the [Num. Display] dialog,
select [Operation/Alarm] and check if [Alarm] is checked. If checked, input a
value in the range between the specified maximum and minimum values.
3. Display the setting dialog of the numeric keypad and select [Operation Select].
If [Enable/disable the entry key (Bit 15)] is checked, set (ON) bit 15 of the
control device memory.
To make the numeric keypad available for entry at all times, uncheck the box
and transfer data again.
4. When using [Input Cursor Movement Control Device], check if the bit of the
cursor movement order number for the entry target (numerical data
display/character display) is set (ON).
* The [Input Cursor Movement Control Device] indicates the device memory
that controls whether to move the cursor to respective entry targets. The setting
location varies depending on the entry target type and position placement. For
more information, click here
Send
https://monitouch.fujielectric.com/site/faq-e/qa/23 2/3
10/12/2019 FAQ | HMI MONITOUCH
LINE UP
V9 SERIES
TECHNOSHOT
S8 SERIES
V8 SERIES
Web Machine Interface
V-SFT
TELLUS and V-Sever
Support »
Download
Inquiries
Recommended peripheral equipment
FAQ »
Distributors »
Overseas distributors
» Privacy Policy
https://monitouch.fujielectric.com/site/faq-e/qa/23 3/3