0 valutazioniIl 0% ha trovato utile questo documento (0 voti)
249 visualizzazioni3 pagine
This document is a question paper for a class test in mechanical engineering at Sanjivani K.B.P. Polytechnic. The test covers the topics of screws, springs, and bearings from the Engineering Mechanics and Design course. It contains two main questions - the first asks students to answer short questions on topics like screw profiles, spring properties, and bearing types; the second asks students to solve multi-part problems related to power screw analysis, spring design, and screw jack design. The test is worth 20 marks and is to be completed in 1 hour and 30 minutes.
This document is a question paper for a class test in mechanical engineering at Sanjivani K.B.P. Polytechnic. The test covers the topics of screws, springs, and bearings from the Engineering Mechanics and Design course. It contains two main questions - the first asks students to answer short questions on topics like screw profiles, spring properties, and bearing types; the second asks students to solve multi-part problems related to power screw analysis, spring design, and screw jack design. The test is worth 20 marks and is to be completed in 1 hour and 30 minutes.
This document is a question paper for a class test in mechanical engineering at Sanjivani K.B.P. Polytechnic. The test covers the topics of screws, springs, and bearings from the Engineering Mechanics and Design course. It contains two main questions - the first asks students to answer short questions on topics like screw profiles, spring properties, and bearing types; the second asks students to solve multi-part problems related to power screw analysis, spring design, and screw jack design. The test is worth 20 marks and is to be completed in 1 hour and 30 minutes.
Sanjivani K.B.P. Polytechnic, Kopargaon CLASS TEST II QUESTION PAPER Academic Year:2019-20 Program:Mechanical Engineering Class & Div:TYME B Course: EMD Course Code:22564 Name of Faculty: Mr.I.K.Sayyad Marks:20 Time: 1:30 Hr
Question Marks COs
Instructions: (1) All Questions are Compulsory. (2) Figures to the right indicate full marks. (3) Assume suitable data, if necessary. Q1) Attempt any Four of the following: a) Define Self locking and Overhauling of Screw. 08Marks b) Sketch any one type of thread profile used in power screw. C-564d c) Define Spring Index and stiffness of spring. C-564d d) Enlist any four functions of spring. C-564e e) Explain bolts of uniform strength. C-564e f) Enlist types of bearings. C-564d Q2) Attempt any TWO of the following: 12Marks C-564f a) An electric motor driven power screw moves a nut in horizontal C-564d plane against a force of 75KN at a speed of 300mm/min. The screw has a single start thread of 6mm pitch and 40mm major diameter. The coefficient of friction at the square thread is 0.1. Estimate the power of motor. b) Design a helical compression spring for a maximum load of C-564e 1000N for a deflection of 25mm using the value of spring index as 5. The maximum permissible shear stress for spring wire is 420 MPa and Modulus of rigidity is 84 KN/mm2. Take Wahl’s correction factor K= (4C-1/4C-4)+(0.165/C). c) Write strength equations for designing of screw and nut of a C-564d screw jack. ACAD/F/EXAM/01 Rev: 00 Date: 11/12/2017 Sanjivani K.B.P. Polytechnic, Kopargaon CLASS TEST II QUESTION PAPER Academic Year:2019-20 Program:Mechanical Engineering Class & Div:TYME B Course: EMD Course Code:22564 Name of Faculty: Mr.I.K.Sayyad Marks:20 Time: 1:30 Hr ACAD/F/EXAM/01 Rev: 00 Date: 11/12/2017 Sanjivani K.B.P. Polytechnic, Kopargaon CLASS TEST II QUESTION PAPER Academic Year:2019-20 Program:Mechanical Engineering Class & Div:TYME B Course: EMD Course Code:22564 Name of Faculty: Mr.I.K.Sayyad Marks:20 Time: 1:30 Hr