Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Welcome
This is our standard parts and accessory list. Part descriptions and pictures are provided to make
your selection easier. If you require a replacement part that is not shown here, please contact our
offices for help.
Limited Warranty
All Cathodic Technology Limited (CATH-TECH™) rectifiers, instruments and equipment are
warranted against defects in materials, design or workmanship for a period of two years from date
of sale or one year from the date of installation or use, whichever comes first. This warranty
excludes damage due to misuse, abuse, tampering or acts of God such as fires, floods, wind
damage, lightning etc.
We will repair or replace at our option any defective component, after examination in our
manufacturing facility, if the fault is due to defective materials or labour, within two years of the
purchase date or one year from service date. For warranty repair, a repair authorisation must be
obtained from CATH-TECH™ prior to shipping the defective unit pre-paid to Cathodic
Technology Limited.
CATH-TECH™ POLICY
• CATH-TECH™ extends a one-year in use warranty on all units, which have been designed by
CATH-TECH™ staff.
• CATH-TECH™ reserves the right to make any changes in design or specification which it
deems an improvement, with no liability to make the same changes on existing equipment.
• This warranty is in lieu of all other warranties or guaranties, expressed or implied, which might
otherwise exist. The purchaser is relying only upon this guarantee and not upon any
representations not herein expressed.
• Any material or equipment being returned to the factory must first have return authorisation
from CATH-TECH™.
Complete Equipment
CTL-001
Hexcorder Millennium CTL-033
1M memory CI-25
• Choice of hip or 25 Amp Current
back pack wire Interrupter
dispenser
CTL-002
Hexcorder Millennium CTL-035
2M memory CI-50
• Choice of hip or 50 Amp Current
back pack wire Interrupter
dispenser
CTL-037
CTL-007 CI-100
CTL-3000 Analogue 100 Amp Current
DCVG Instrument Interrupter
CTL-039
CTL-020 CI-200
Smart Logger 1M 200 Amp Current
memory Interrupter
CTL-041
CTL-021 CI-3PH
Smart Logger 2M 3 Phase, 50
memory Amp/Phase Current
Interrupter
CTL-025
Mini Logger
CTL-031
CI-15
15 Amp Current
Interrupter
CTL-101 CTL-133
Hip pack wire Half cell pole
dispenser
replacement switch
• Does not include • Does not include
cables or survey red cap
wire
CTL-134
CTL-103 Cu CuSO4 half cell
Counter wheel & axle with cone tip
CTL-135
CTL-104 Cap for half cell pole
Wire tensioner switch
CTL-117 CTL-141
Carry strap for Small spool wire for
Hexcorder or hip hip pack
pack
CTL-121
Backpack wire
dispenser CTL-142
• Complete with Case small spools
cable to (16)
Hexcorder
• Does not include
survey wire
CTL-122 CTL-143
Wire chainage for Small spool, empty
backpack
CTL-131
Half cell extension CTL-145
pole Large spool wire for
• Does not include backpack
half cell
CTL-146
Case large spools (4)
Cables
OBSOLETE
CTL-206 CTL-213
Cable Hex to wire Long Y cable
dispenser, old 3 wire
CTL-207 CTL-214
Cable Hex to Data logging cable
backpack, 4 wire for Hex
CTL-208 CTL-215
Cable Hex to hip Y cable set
pack, 4 wire
CTL-211 CTL-216
Cable Hex to half cell CI-3PH interrupt
pole, pair cables
CTL-212 CTL-217
Short Y cable CI-15 interrupt cables
CTL-219 CTL-231
12V charger CTL-
CI-50 interrupt cables
3000
CTL-220 CTL-232
CI-100 interrupt
12V charger CI-15
cables
CTL-221 CTL-233
CI-200 interrupt 12VDC aux power
cables cable for CI-15
CTL-223 CTL-234
AC interrupt cables 12VDC aux power
for CI-25 & 50 cable for CI-25 & 50
CTL-224 CTL-235
Test leads, smart 7V charger Hex, SL,
logger CI-25 & 50
CTL-225 CTL-236
Test leads, mini 12VDC to 7V cigar
logger charger Hex & SL
CTL-230 CTL-252
Power cable CI-100
RS232 cable Hex
200 3PH
CTL-253 CTL-256
RS232C cable CI
IR to RS232 adaptor
program
CTL-255 CTL-258
USB to serial port
IR to USB adaptor
adapter
Connector
material?
Metallic Black plastic
Note the shape of the antenna and the connector when ordering. There have been some product
changes/replacements over time.
OBSOLETE –
OBSOLETE replaced by
CTL-301 CTL-310
GPS 25 engine CTL-305
GPS 16, short lead
OBSOLETE –
replaced by
CTL-304 CTL-310
GPS 18X, short lead
CTL-302 • Hexcorder
GPS 25 antenna,
BNC, TNC or MCX
connector
CTL-303 CTL-311
GPS 18X, long lead
GPS Trimble engine
• Current
• Used for current
Interrupters &
interrupters only
Smart Logger
CTL-304 CTL-320
GPS Trimble
GPS garmin
antenna, BNC, TNC
extention cable 30m
or MCX connector
CTL-515
QWERTY keypad CTL-530
assembly for 7.2V battery for Hex
Hexcorder & Smart & SL
Logger
CTL-516 CTL-531
LCD display for 7.2V battery for CI-25
Hexcorder & Smart & 50
Logger
CTL-532 CTL-553
12V battery for CI-15 Mechanical relay for
& CTL-3000 CI-100 & 200
CTL-533 CTL-560
12V battery for CI-
Pin for Hex cables
100 & 200
CTL-541 CTL-561
Keypad for CI & old Socket for Hex
SL cables
CTL-542 CTL-562
LCD display for CI & Amp connectors for
old SL Hex cables
CTL-550 CTL-563
DC relay for CI-25 &
Pin extractor
50
CTL-551 CTL-564
AC relay for CI-25 & Alligator clips pack
50 10
CTL-603 CTL-609
Circuit board CI-100
Internal charger & 200
circuit board 120V
SEE NEXT PAGE
CTL-604 CTL-621
Internal charger Circuit board mini
circuit board 240V logger
CTL-605 CTL-626
Internal charger Circuit board Hex
circuit for voltage active AC filter
switch
CTL-627
CTL-606 Circuit board smart
Circuit board CI-15 logger
CTL-607 CTL-628
Circuit board relay Circuit board Hex
CI-15 Millenium
CTL-608
Circuit board CI-25 &
50
SEE NEXT PAGE
CI-97
CI-2000
CI-2001
CI-2002
CI-2010