Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
All you need to know about the original aluminium composite material
PRODUCT RANGE
ALUCOBOND ® A2 Thickness: 3 / 4 mm
Width [mm] 1 000 1 250 1 500 1 575 1 650
Length [mm] 2 000 – 6800 2 000 – 6800 2 000 – 6800 2 000 – 6800 2 000 – 6800
Solid & Metallic Colours -- --
Spectra & Sparkling Colours -- -- --
Anodized Look -- --
NaturAL** -- -- --
ALUCOBOND Legno – premium wood
®
-- -- --
Vintage -- -- --
Façade design – individual décor -- -- --
Urban -- -- --
Terra -- -- --
Wood -- -- --
Mill Finish -- -- --
on request * Anodized according to DIN 17611. All anodized ALUCOBOND composite panels have contact lines (about 25 mm width) on their short sides. For
®
panel lengths of more than 3 500 mm, the composite panels have contact lines (about 20 mm width) on their long sides. On the back, there are con-
tact lines of about 35 mm on the short and the long sides of the panels. Maximum panel length 6 500 mm. Please take this into consideration when
dimensioning the panels.
** Exception: ALUCOBOND ® naturAL Reflect is only available in ALUCOBOND ® PLUS in width 1 250 mm.
90° V-groove for folds up to 90° 135° V-groove for folds up to 135°
THE PRODUCT
ALUCOBOND ® PLUS
ALUCOBOND® PLUS has been developed exclusively for the
more stringent requirements of the fire prevention regula-
tions in architectural products. Thanks to its mineral-filled,
core ALUCOBOND® PLUS meets the stricter requirements
of the fire classifications. It is hardly flammable and offers
all the proven product properties of the ALUCOBOND®
family, such as flatness, formability, resistance to weather Mineral-filled polymer,
and easy processing. fire retardant
70% mineral content
0,5 mm aluminium
ALUCOBOND ® A2
ALUCOBOND® A2 is our non-combustible aluminium com-
posite panel used in architecture that fulfills the respective
standards worldwide. Thanks to its mineral-filled core,
ALUCOBOND® A2 meets the strict requirements of the fire
regulations and enhances the possibilities for the concept
and design of buildings. ALUCOBOND® A2, just like all the
products of the ALUCOBOND® family, allows simple process- Mineral-filled core with polymer
ing, is impact-resistant, break-proof and weatherproof and, adhesives, non-combustible
> 90% mineral content
above all, non-combustible.
0,5 mm aluminium
ALUCOBOND ® composite panels can also be used with wooden substructure. Canopies and soffits can be realized with ALUCOBOND ® as well.
For more technical information, please contact our technical service.
LIGHTNESS AND TRANSPARENCY
BUS STATION, GERMANY – BLUNCK+MORGEN ARCHITECTS
Inside the building, the auditorium’s sinuous shapes and curves are in strong
contrast to the austere, cubic external appearance. Concrete and ALUCOBOND ®
naturAL Brushed establish material continuity between the exterior and interior.
Viennese architecture office, Coop Himmelb(l)au designed the House of Music as a fusi-
on between school and a concert hall, using an open-plan design to promote interaction
between audiences, artists, students and educators. According to Wolf. D. Prix, Design
Principal and CEO of Coop Himmelb(l)au, “The concept behind the building is evident from
its outer shape: the school embraces the concert hall. Our architecture acts just like an
instrument’s resonance chamber by magnifying the creativity within the House of Music.”
A concert hall seating 1,300 forms the core of the complex and is surrounded by a U-shaped
block containing rehearsal and teaching rooms. A spacious foyer with a multi-storey
glazed frontage links these rooms and overlooks the adjoining Cultural Plaza and nearby
fjord. Another three rooms of varying sizes are located under the foyer and offer additi-
onal space: the Intimate, the Rhythmic and the Classical hall. Students and visitors can
look into the concert hall through several windows and watch music in the making, both
during rehearsals and concerts. In the stalls and on the curved upper circles, the seats are
placed to ensure the best possible acoustics and view of the stage.
FIRE CLASSIFICATION
ALUCOBOND ® PLUS ALUCOBOND ® A2
Great Britain met the performance Class B-s1, d0 met the performance meets requirements of LUL
England / Wales / criteria of BR 135 criteria of BR 135 limited combustible
Scotland non combustible
Great Britain BS 8414 part 1 & 2 passed BS 8414 part 1 & 2 passed
APPROVALS
Country Approval Name Approval authority
Great Britain No 05/4214 ALUCOBOND ® Cladding Systems British Board of Agrément (BBA), Garston
Spain No 345 Sistema de revistimiento de fachadas ventiladas mediante Instituto Eduardo Toroja, Madrid
bandejas procedentes de paneles ALUCOBOND ®
Spain No 346 Sistema de revistimiento de fachadas ventiladas Instituto Eduardo Toroja, Madrid
mediante placas remachadas procedentes de paneles
ALUCOBOND ®
USEFUL INFORMATION
In addition to our Solid & Metallic colours we offer the following special surfaces:
SURFACES OF NATURAL BEAUTY THE TEXTURE OF PRECIOUS EARTH SWATHED IN A MELLOW SHEEN
DS ON QUALITY AND OPTICS NATÜRLICH SCHÖNE OBERFLÄCHEN MIT DER STRUKTUR EDLER ERDE IN SANFTES SCHIMMERN GEHÜLLT
ÜCHE AN QUALITÄT UND OPTIK NATURAL, VERSATILE, DURABLE
SPECTRA &Create the difference.
SPARKLING COLOURS ANODIZEDCreate NATÜRLICH, VIELSEITIG, LANGLEBIG
LOOKthe difference. Create the difference.
naturAL BEAUTY PREMIUM WOOD URBAN Create the difference. TERRA Stone and crystal stand for endurance, authenticity and
intrinsic value. They reflect light in a magical, vibrant way
Beständigkeit, Ursprünglichkeit und Wertigkeit, dafür
stehen Steine und Kristalle. Sie zaubern lebendige Licht-
Enchanting surfaces for eye-catching impressions Faszinierende Oberflächen als besonderer Blickfang English Deutsch The natural beauty of satin-smooth metal Die natürliche Schönheit von mattem, samtigem Metall English Deutsch Metallic surfaces with personality Metallische Oberflächen mit Charakter English Deutsch Aluminium composite material with a structured feel Aluminiumverbundplatten mit fühlbarer Struktur English Deutsch Muted mat surfaces with big city flair Gedeckte, matte Oberflächen mit Großstadtflair English Deutsch Glistening envelope, earthy hues Schimmernd verhüllt, erdig getönt English Deutsch and their texture is unexpectedly varied: ranging from reflexe und überraschen mit unterschiedlicher Haptik von
rough to smooth. ALUCOBOND® terra is inspired by rau bis glatt. ALUCOBOND® terra ist inspiriert vom Schil-
iridescent stone. The décor’s surface refracts the daylight lern der Gesteine. Die Oberflächen der Dekore brechen
creating a matt sheen and lustrous hues, sometimes das Tageslicht mit mattem Schimmer und zaubern so mal
elegant and sometimes earthy. ALUCOBOND® terra eine elegante, mal eine erdig changierende Farbigkeit.
unites the typical crystalline surface and velvety feel ALUCOBOND® terra verbindet die für Steinplatten typi-
found in natural stone with many of the advantages of sche, kristalline Oberfläche und samtige Haptik mit vie-
ALUCOBOND® composite panels. Unlike most natural len Vorteilen der ALUCOBOND®-Verbundplatten: Anders
stone, ALUCOBOND® composite panels are both very als die meisten Natursteinplatten sind ALUCOBOND®-
thin and light, but offer at the same time a high level of Verbundplatten sehr dünn und leicht, haben aber gleich-
flexural and tensile strength. Large format panels can be zeitig eine hohe Biegesteifigkeit sowie Bruchfestigkeit.
easily and accurately fabricated, processed, transported, Große Plattenformate lassen sich einfach und pass-
installed, and, in addition, three-dimensionally shaped by genau herstellen, bearbeiten, transportieren, montieren
using folding and roll bending techniques. Unlike many sowie durch Abkanten und Rundbiegen mehrdimen-
stone surfaces, ALUCOBOND® terra is also weather- sional verformen. Dazu weist ALUCOBOND® terra, im
resistant and colour fast. Gegensatz zu vielen Steinoberflächen, eine sehr hohe
Witterungs- und Farbbeständigkeit auf.
Nature-loving: Excellent CO2 balance and sophisticated wood look in ALUCOBOND ® composite panels at the NU-Office in Munich. I Der Natur
verbunden: Das NU-Office in München überzeugt mit einer hervorragenden CO2-Bilanz und mit der edlen Holzoptik von ALUCOBOND® Verbundplatten.
Architect: Architecture Office Falk von Tettenborn I Photo: Katzer
Wyndham Harbour, Australia I Architect: Fender Katsalidis I Material: naturAL COPPER | © Angus Martin
We love wood. And we also love sophisticated architecture. Wir lieben Holz. Und wir lieben anspruchsvolle Architektur. Daher
That was our reason for developing top - qualit y structured entwickelten wir ALUCOBOND ® Legno, hochwertige strukturierte
ALUCOBOND ® Legno cladding panels, which combine all the Fassadenplatten mit der natürlichen Schönheit von Holz und dem
natural beauty of wood and all the benefits of ALUCOBOND ® guten Materialcharakter von ALUCOBOND ® Aluminium Verbund-
aluminium composite panels. platten. For façades with an elegant sheen. | Für Fassaden mit dem feinen Schimmer.
h, e. g. only one einer Produktionscharge einzusetzen bzw. Gebäudeansichten Please contact us for more information and available specifi cations. Es gelten Mindestbestellmengen. Nähere Einzelheiten und verfügbare - high level of flexural strength for both complex and tight bends, - einer sehr guten Biegbarkeit in komplexe und enge, auch drei- order quantities apply. Please contact us for more information and ALUCOBOND ® plus. Es gelten Mindestbestellmengen. Nähere Einzel-
uilding elevation. nur mit einer Charge zu bekleiden. ALUCOBOND ® Platten Spezifi kationen erhalten Sie gerne auf Anfrage.
as well as three-dimensional and amorphous curvature dimensionale und amorphe Krümmungen available specifications. heiten und verfügbare Spezifikationen erhalten Sie gerne auf Anfrage.
GB | D
ALUCOBOND® Anodized Look
GB | D
APPLICATION INFORMATION
GB | D
ed in the direction sollten entsprechend den Richtungspfeilen auf der Schutzfolie - versatile processing options using routing and folding techniques - einer vielseitigen Bearbeitung durch die Fräßkanttechnik
To avoid possible refl ection differences, panels must be installed in the ANWENDUNGSHINWEIS APPLICATION INFORMATION ANWENDUNGSHINWEIS
ff foil. montiert werden. same direction as marked on the protective peel-off foil. All aluminium Um Refl exionsunterschiede zu vermeiden, müssen die Verbundplatten - large variety of panel formats from very large to very small - einem variablen, auch sehr großen oder schmalen Plattenformat
ALUCOBOND® Legno
ALUCOBOND® naturAL
We recommend installing the composite panels in the same direction Um Reflektionsunterschiede zu vermeiden, müssen die Verbundplatten
ALUCOBOND® terra
alloys have minute variations that occur during the production process. in derselben Richtung montiert werden, wie sie durch Richtungspfeile - natural-looking, varied wood look with grainy structured feel - einer natürlich anmutenden, abwechslungsreichen Holzoptik as marked on the protective peel-off-foil to avoid potential reflection in derselben Richtung montiert werden, wie sie durch Richtungspfeile
ase contact your Für mehr Informationen über unsere Produkte kontaktieren Sie Additionally, the rolling direction of the ALUCOBOND ® naturAL sur- auf der Schutzfolie angegeben sind.
- easy clean surface mit Struktur differences. Panels from different production batches may vary slightly auf der Schutzfolie angegeben sind. Bei der Verwendung von Platten
face structure effects how light is refl ected. Such effects cause subtle ALUCOBOND ® naturAL hat herstellungsbedingt eine Varianz in der
w.alucobond.com. ihren zuständigen ALUCOBOND ® Vertreter oder besuchen Sie differences in colour and sheen and are common for all natural, non-coil Legierungszusammensetzung, die Farbton- bzw. Reflexionsschwankungen - light and UV resistance without losing colour - einer einfachen Reinigung der Oberflächen in colour. To ensure colour consistency, we strongly recommend aus unterschiedlichen Produktionseinheiten kann es zu Farbabwei-
uns unter www.alucobond.com. coated metal surfaces. In order to minimize these variations in colour bedingen können. Zusätzlich beeinflusst die Orientierung der Walzstruktur ordering the total material requirement for a project in one order. chungen kommen. Zur Sicherstellung eines einheitlichen Farbtons sollte
- resistance to fungus, moss, decay and weathering light and UV - einer Licht- und UV-Beständigkeit ohne Farbverluste
and appearance, all ALUCOBOND ® naturAL aluminium composite die wahrgenommene Helligkeit der Oberfl äche. Wir empfehlen, projekt- deshalb der Gesamtbedarf für ein Projekt in einer Bestellung erfolgen.
- extreme durability - einer Resistenz gegen Pilzbefall, Moos, Fäulnis und Verwitterung
panels for a project respectively an elevation of a project should bezogen ALUCOBOND ® naturAL Aluminium-Verbundplatten, stets aus
04 / 2016 Printed in Germany
3A Composites GmbH originate from the same batch (see labels on the pallets). Furthermore, einer Produktionscharge einzusetzen bzw. Gebäudeansichten nur mit einer - complete recyclability - einer extremen Langlebigkeit 3A Composites GmbH ALUCOBOND ® terra uses high-grade polymer coating systems. ALUCOBOND ® terra verwendet hochwertige Polymerlacksysteme. 3A Composites GmbH
Alusingenplatz 1 panels should be installed in the same direction as marked on the Charge zu bekleiden. Eine 100 % Farb- oder Helligkeitsübereinstimmung 3A Composites GmbH - einer vollständigen Rezyklierbarkeit Alusingenplatz 1 Alusingenplatz 1
78224 Singen, Germanyprotective peel-off foil. However, 100 % uniformity in colour and bright- ist jedoch bei diesen Oberfl ächen nie gegeben. Gerne beraten wir Sie Alusingenplatz 1 78224 Singen, Germany 78224 Singen, Germany
We are happy to provide more customised information about the Gerne beraten wir Sie individuell über die besonderen Eigenschaften
Phone + 49 7731 - 941ness
2060of such surfaces is not feasible. We will be pleased to advise you 78224 Singen, Germany Phone + 49 7731 - 941 2060 Phone + 49 7731 - 941 2060
individuell über die besonderen Eigenschaften dieser Oberfl ächen. special characteristics of ALUCOBOND ® terra surfaces. dieser Oberflächen.
Fax + 49 7731 - 941 2845 Phone + 49 7731Receive further information from your ALUCOBOND ® sales manager
- 941 2060 Weitere Informationen erhalten Sie bei Ihrem ALUCOBOND ® Fax + 49 7731 - 941 2845 Fax + 49 7731 - 941 2845
regarding special characteristics of ALUCOBOND ® naturAL surfaces. Bitte separate Merkblätter beachten. Characteristic of ALUCOBOND® terra is the crystalline matt sheen of the surface which changes with the light. | Charakteristisch für
info.eu @ alucobond.com Fax + 49 7731 - 941 2845 info.eu @ alucobond.com info.eu @alucobond.com
Please refer to the separate data sheets. or on www.alucobond.com.
info.eu @alucobond.com
Verkaufsleiter oder auf www.alucobond.com. Developed in cooperation with
www.alucobond.com www.alucobond.com www.alucobond.com Beckers Germany. ALUCOBOND® terra ist die kristalline Oberfläche, deren Farbigkeit mit dem Lichteinfall matt changiert.
www.alucobond.com
SURFACES WARRANTY
ALUCOBOND® surfaces are coated using exclusively high- A LUCOBOND® stands for high quality and longevity.
quality and eco-friendly lacquer systems. They are highly Warranties according to the product specification and ap-
weather resistant and resistant to industrial emissions. proved field of application can be obtained upon request.
These properties are achieved using UV-resistant bonding
agents. For top-level architecture in exterior applications, ENVIRONMENT, HEALTH AND SAFETY
we use high-grade polymer coating systems, e.g. PVDF and For 3A Composites, effective, continuous environmental
FEVE lacquers, which have proved ideal for architectural protection is a top priority. It is of utmost importance to
applications. These surface coatings are applied by coil- preserve our natural resources for future generations. 3A
coating technology using a continuous coating and curing Composites is committed to implementing its own continual
process. The quality of the coating is tested according to improvements in environmental protection, measures
standards established by E.C.C.A. (European Coil Coating which go above and beyond government regulations. 3A
Association). Composites was one of the first companies to develop its
own environmental management system, which is regularly
INSTALLATION audited by independent experts. Successful certification
To avoid possible ref lection differences (except for solid according to EN ISO 14001 and EN ISO 50001 is clear evidence
colours), it is essential to install the panels in the same of our commitment to the environment.
direction as marked on the protective peel-off-foil. Colour Our ALUCOBOND® panels, 100% manufactured in Singen,
variations may occur between panels originating from Germany, only contain high quality, unmixed raw materials,
different production batches. To ensure colour consist- such as 5005 A alloy aluminium coils.
ency, the total requirement for a project should be placed
in one order. RECYCLING
Make sure to remove the protective foil as soon as possible ALUCOBOND® can be fully recycled, i.e. both the core material
after installation as prolonged exposure to the elements and the aluminium cover sheets can be recycled and used
could make the foil difficult to remove. When stacking the for the production of new material.
panels, nothing should be placed in between them, as this
could produce marks on the panels. It is recommended to SUSTAINABILITY
only stack pallets of identical size should, with a maximum Environmental Product Declarations (EPDs) are considered
of 6 pallets stacked on top of each other. to provide the most comprehensive and transparent environ-
mental data about construction products. In addition, the
task of EPD evaluation is entrusted to independent experts.
The EPD for ALUCOBOND® composite panels contains all
relevant data and is available at www.alucobond.com.
Façade fascination.
English
AT A GLANCE
01/07/2018 Printed in Germany
3A Composites GmbH
Alusingenplatz 1
78224 Singen, Germany
Tel + 49 7731 - 941 2347
info.eu@alucobond.com
www.alucobond.com