Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
(i) Initial and routine load test 285.00 Tonne 1500.00 427500
50 RM 4855.00 242750
2.25B/ Taking exploratory boring 100 mm dia
18 fordetailed investigation with diamond drill
doubl etube in al lsorts ofsoil like sand,soft soil,
moorum, gravels,boulders and soft rock including
all materials such as casing
pipes,accessoriesgreaseand other such materials and
or as required including conveying such materials
and machineryto siteof work preservingthe loose
sample and core samples serially numbered at the
site of work and conveying the same to the head
quarters of concerned office as directed and
submission of detailed bore log sheet as per IRC 78-
2014and section 2400 including testing of samples
as perspecifications.
D Height upto 5m
(a) Using concrete Mixer
(iii) RCC Grade M 30 360.412 Cum. 6370.00 2295822
(ii)
Asphaltic concrete 56 mm. deep wearing coat. 75.00 Mtr 120.00 9000
28 4.20/29 Painting on kerbs in black and yellow alternate
bands including cost of material and labour
complete as per drawings and specifications as
per clause 803.
PCC M - 15
Abutment A1& A2 2 9.75 8.70 0.10 16.965 cum
In Pier P1 to P8 8 4.80 4.80 0.10 18.432 cum
Deduct (-) 50 3.14 (1.2x1.2)/4 0.10 5.652 cum
Total= 41.049 cum
10 5 50 RM
2.25B/ Taking exploratory boring 100 mm dia
18 fordetailed investigation with diamond drill
doubl etube in al lsorts ofsoil like sand,soft soil,
moorum, gravels,boulders and soft rock including
all materials such as casing
pipes,accessoriesgreaseand other such materials
and or as required including conveying such
materials and machineryto siteof work
preservingthe loose sample and core samples
serially numbered at the site of work and
conveying the same to the head quarters of
concerned office as directed and submission of
detailed bore log sheet as per IRC 78-2014and
section 2400 including testing of samples as
perspecifications.
10 24 240 RM
(B) SUB STRUCTURE
11 3.6/20 Providing and laying Plain/Reinforced
cement concrete in sub-structure complete as
per drawing and technical specifications
section 1500, 1700 and 2200
D Height upto 5m
(a) Using concrete Mixer
(iii) RCC Grade M 30
Side wall (Abutment A1 & A2) 2X2 8.10 0.30 4.500 43.740 Cum.
Inner wall (RL.99.150 To RL.103.650) 2X2 7.35 0.25 4.500 33.075 Cum.
Inner wall (RL.99.150 To RL.103.650) 2X2 0.25 7.30 4.500 32.850 Cum.
Rear wall (RL.99.150 To RL.103.650) 2 0.30 7.80 4.500 21.060 Cum.
Front wall (RL.99.150 To RL.100.700) 2 0.30 7.80 1.550 7.254 Cum.
Front wall cap(RL.100.700 To RL.101.200) 2 1.15 8.40 0.500 9.660 Cum.
Front wall (RL.101.200 To RL.103.650) 2 0.30 8.40 2.450 12.348 Cum.
159.987 Cum.
Pier shaft P1 to P8 8 3.14 (1.8x1.8)/4 2.79 56.769 Cum.
Square head 8 1.80 1.80 0.40 10.368 Cum.
Pier cap P1 to P8 8 x 1.80 x (6.85+1.80)/2 x 0.70 43.596 Cum.
8 6.85 1.80 0.80 78.912 Cum.
S. S.O.R DESCRIPTION No. MEASUREMENT QTy.
No. L B H/D
item
Pedestal 56 0.70 0.55 0.50 10.780 Cum.
200.425 Cum.
Total= 360.412 Cum.
12 3.7/21 Supplying, fitting and placing HYSD bar
reinforcement in sub-structure complete as
per drawing and technical specifications
section 1600 and 2200
4 4 Each
(A)EARTH WORK
1 1.3/8 Clearing and grubbing road land
including uprooting rank vegetation,
grass, bushes, shrubs, saplings and
trees girth up to 300 mm, removal of
stumps of trees cut earlier and disposal of
unserviceable materials and stacking of
serviceable material to be used or
auctioned up to a lead of 1000 meters
including removal and disposal of top
organic soil not exceeding 150 mm in
thickness if required and as per relevant
clauses of section-200.
A In area of light jungle 1.50 Hect. 40680.00 61020
A Ordinary soil
767.58 Cum. 146.00 112067
Name of work:- Const. of Approach road of Bridge across BORDHA River in km 3/7 on
PAWDHA RADHANA road.
MEASUREMENT
S.NO.ITEM NO. PARTICULARS Qty.
No. L B H/D
1 2 3 4 5 6 7 8
(A)EARTH WORK
1 1.3/8 Clearing and grubbing road land
including uprooting rank vegetation,
grass, bushes, shrubs, saplings and
trees girth up to 300 mm, removal of
stumps of trees cut earlier and disposal
of unserviceable materials and
stacking of serviceable material to be
used or auctioned up to a lead of 1000
meters including removal and disposal
of top organic soil not exceeding 150
mm in thickness if required and as
per relevant clauses of section-200.
A In area of light jungle 2 x 250 x 30 /10000 - 1.500 Hect.
upto 3 m depth
Toe wall
conical portion
4 16.50 1.10 1.00 72.600
A Height upto 5m
Cum.
Cum.
Cum.
QUANTITY FOR EARTHWORK
Name of work :- Approach Road of BORDHA River Bridge km 3/7 on PAWDHA RADHANA road.
Side slope for Embankment S:1 = 2 :1 cutting 1: 1.5
CH. G.L. Formation Height or Mean Width Central Area Side Area Total Area Length Between Quantity
Level Depth Height d b bd sd2 (bd+sd2 ) two Area Embankment Cutting
m m m sqm sqm sqm m cum cum
PAWDHA SIDE
1 2 3 4 5 6 7 8 9 10 11 12
180 101.250 101.250 0.000 0.000 8.40 0.000 0.000 0.000 0 0.000
150 101.050 101.520 0.470 0.235 8.40 1.974 0.110 2.084 30 62.533
120 99.150 101.790 2.640 1.555 8.40 13.062 4.836 17.898 30 536.941
90 98.255 102.060 3.805 3.222 8.40 27.069 20.769 47.838 30 1435.140
60 98.125 102.330 4.205 4.005 8.40 33.642 32.080 65.722 30 1971.662
30 98.005 102.600 4.595 4.400 8.40 36.960 38.720 75.680 30 2270.400 C.D.
15 98.275 102.735 4.460 4.527 8.40 38.031 40.997 79.028 15 1185.413
0 99.275 102.870 3.595 4.027 8.40 33.831 32.442 66.273 15 994.088
15 99.970 103.005 3.035 3.315 8.40 27.846 21.978 49.824 15 747.367
30 100.385 103.140 2.755 2.895 8.40 24.318 16.762 41.080 15 616.201
45 100.595 103.275 2.680 2.718 8.40 22.827 14.770 37.597 15 563.949
60 100.655 103.410 2.755 2.718 8.40 22.827 14.770 37.597 15 563.949
75 100.505 103.545 3.040 2.898 8.40 24.339 16.791 41.130 15 616.950
90 100.485 103.690 3.205 3.123 8.40 26.229 19.500 45.729 15 685.935
105 100.200 103.830 3.630 3.418 8.40 28.707 23.359 52.066 15 780.984
120 99.385 103.965 4.580 4.105 8.40 34.482 33.702 68.184 15 1022.761
135 100.080 103.965 3.885 4.233 8.40 35.553 35.828 71.381 15 1070.717
150 98.285 103.965 5.680 4.783 8.40 40.173 45.745 85.918 15 1288.764
330 16413.754 CUM
RADHANA SIDE
339 99.800 103.965 4.165 0.000 8.40 0.000 0.000 0.000 0 0.000
345 99.950 103.965 4.015 4.090 8.40 34.356 33.456 67.812 6 406.873
360 101.200 103.885 2.685 3.350 8.40 28.140 22.445 50.585 15 758.775
375 101.450 103.805 2.355 2.520 8.40 21.168 12.701 33.869 15 508.032
390 101.030 103.725 2.695 2.525 8.40 21.210 12.751 33.961 15 509.419
405 101.050 103.645 2.595 2.645 8.40 22.218 13.992 36.210 15 543.151
420 100.880 103.565 2.685 2.640 8.40 22.176 13.939 36.115 15 541.728
435 100.720 103.485 2.765 2.725 8.40 22.890 14.851 37.741 15 566.119
450 100.830 103.405 2.575 2.670 8.40 22.428 14.258 36.686 15 550.287
465 101.050 103.325 2.275 2.425 8.40 20.370 11.761 32.131 15 481.969
480 101.050 103.245 2.195 2.235 8.40 18.774 9.990 28.764 15 431.467
495 101.100 103.165 2.065 2.130 8.40 17.892 9.074 26.966 15 404.487
510 101.550 103.085 1.535 1.800 8.40 15.120 6.480 21.600 15 324.000
525 101.600 103.005 1.405 1.735 8.40 14.574 6.020 20.594 15 308.917
540 102.010 102.925 0.915 1.160 8.40 9.744 2.691 12.435 15 186.528
555 102.050 102.845 0.795 0.855 8.40 7.182 1.462 8.644 15 129.661
570 102.115 102.765 0.650 0.723 8.40 6.069 1.044 7.113 15 106.695
585 102.265 102.685 0.420 0.535 8.40 4.494 0.572 5.066 15 75.997
600 102.155 102.605 0.450 0.435 8.40 3.654 0.378 4.032 15 60.487
615 102.525 102.525 0.000 0.210 8.40 1.764 0.088 1.852 15 27.783
276.00 6922.373
TOTAL QTY. 23336.127 CUM
1. Deduction for crust
1. In flared portion pawdha side WMM 1 30.0 7.50 0.390 87.750
radhana side WMM 1 30.0 7.50 0.390 87.750
pawdha side WMM 1 30.0 (7.5+4.0)/2 0.390 67.275
radhana side WMM 1 30.0 (7.5+4.0)/2 0.390 67.275
pawdha side WMM 1 270.0 4.00 0.390 421.200
radhana side WMM 1 216.0 4.00 0.390 336.960
pawdha side GSB 1 30.0 10.50 0.300 94.500
radhana side GSB 1 30.0 10.50 0.300 94.500
pawdha side GSB 1 30.0 (10.5+9.60)/2 0.300 90.450
radhana side GSB 1 30.0 (10.5+9.60)/2 0.300 90.450
pawdha side GSB 1 270.0 9.60 0.300 777.600
radhana side GSB 1 216.0 9.60 0.300 622.080
Total crust = 2662.290 CUM
2. Hard shoulder
pawdha side 2 30.0 0.45 0.390 10.530
radhana side 2 30.0 0.45 0.390 10.530
pawdha side 2 30.0 1.225 0.390 28.665
radhana side 2 30.0 1.225 0.390 28.665
pawdha side 2 270.0 2.200 0.390 463.320
radhana side 2 216.0 2.200 0.390 370.656
Total shoulder 912.366 CUM
3 Deduct Pitching 2189.388 CUM
4 Deduct filter media 1094.694 CUM
PAWDHA SIDE
Area of
Ch. GL F.L. Depth Av. Depth(d) Slant h =d Length U/S &D/S
Pitching
√(s2+1)
randhna SIDE
(i) Qty. of 300 mm. thick C.C. Block pitiching= 7297.96 x 0.30 2189.388 CUM
(ii) Qty. of filter media 150mm thk = 7297.96 x 0.15 1094.694 CUM
Ordinary soil
upto 3 m depth 454.51 Cum. 146.00 66358
2 3.6/20 Plain cement concrete in sub-structure
complete as per drawing and Technical
Specifications
(i) PCC Grade M 15 711.932 Cum. 4880.00 3474226
3 3.8/21 Providing weep holes in Brick masonry/
Plain/ Reinforced concrete abutment,
wing wall/return wall with 100 mm dia AC
pipe, extending through the full width of the
structure with slope of 1V :20H towards
drawing foce. Complete as per drawing and
Technical specifications section 2706 and
2200
336.00 Meter 321.00 107856
4 3.7/21 Supplying, fitting and placing HYSD bar
reinforcement in sub-structure complete as
per drawing and technical specifications
section 1600 and 2200
10.68 MT. 69002.00 736870
5 4.1/24 Furnishing and Placing
Reinforced/Prestressed cement concrete in
super-structure as per drawing and
Technical Specification sections 1500, 1600
and 1700
B RCC Grade M 25
I For solid slab superstructure
(a) Using concrete Mixer
(i) Height upto 5 m 1.00 Cum. 6877.00 6907
S.NO. ITEM NO. PARTICULARS Qty. Unit Rate Amount
1 2 3 4 5 6 7
6 4.2/27 Supplying, fitting and placing HYSD bar
reinforcement in super-structure complete as
per drawing and technical specifications
1.00 MT. 70101.00 70409
7 4.4/27 Providing and laying Cement concrete
wearing coat M-30 grade including
reinforcement complete as per drawing and
Technical Specifications.
1.97 Cum. 11847.00 23286
8 4.6/27 Construction of RCC railing of M30 Grade
in-situ with 20 mm nominal size aggregate,
true to line and grade, tolerance of vertical
RCC post not to exceed 1 in 500, centre to
centre spacing between vertical post not to
exceed 2000 mm, leaving adequate space
between vertical post for expansion,
complete as per approved drawings and
technical specifications. (vide drawing No.
SD/201, SD/304)
B RCC Grade M 25
I For solid slab superstructure
(a) Using concrete Mixer
1 8.40 3.60 0.30 9.07 Cum.
2 3.60 0.45 0.30 0.97 Cum.
10.04 Cum.
6 4.2/27 Supplying, fitting and placing HYSD
bar reinforcement in super-structure
complete as per drawing and technical
specifications
10.04 100kg/cum /1000 1.00 MT
7 4.4/27 Providing and laying Cement concrete
wearing coat M-30 grade including
reinforcement complete as per drawing
and Technical Specifications.
1 8.40 3.6 0.065 1.97 Cum.
8 4.7/27 Construction of RCC railing of M30
Grade in-situ with 20 mm nominal size
aggregate, true to line and grade,
tolerance of vertical RCC post not to
exceed 1 in 500, centre to centre
spacing between vertical post not to
exceed 2000 mm, leaving adequate
space between vertical post for
expansion, complete as per approved
drawings and technical specifications.
(vide drawing No. SD/201, SD/304)