Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
---------------------------------------------------------------------------------------------
Saphir NL
is the industry standard PTA (Pressure Transient Test) software. Pressure Transient
Analysis, in most cases, is about analyzing high-frequency shut-in data. The data are
captured during dedicated well test operations such as Pressure Buildup Test,
Drawdown Test, Injection Test, etc. The pressure response from these shut -ins can
be used to provide information about the reservoir within the radius of investigation
.for radial flow or the area of investigation for more complex geometries
Skin Factor -1
Reservoir Pressure -4
Relative Permeability -5
Fluid Behavior -6
PROSPER APPLICATION
Design and optimize well completions including multi-lateral, multilayer and •
horizontal wells
Design, diagnose and optimize Gas lifted, Hydraulic pumps and ESP wells •
MBAL
MBAL inputs (three parts)
.e Compositional modeling
-2 PVT
.a Formation GOR at Pb
.b Oil API
.c Gas gravity
.d Water salinity
This data is matched with all other PVT lab data to select best correlation with least
standard deviation
Several pressures and corresponding oil and gas formation volume factors, oil and
gas viscosity
.a Type of reservoir
.c Temperature
.d Initial pressure
.e Porosity
.f Connate water saturation
.g Water compressibility
.j Start of production
.m Relative permeability
-4 Actual production history (date pressure cumulative oil and gas produced )
MBAL outputs
-2 Drive tank model to determine oil water contact and reservoir drive
mechanism
Parameters which we change and make regression about depends on aquifer model,
e.g. Hurst Van modified model
Parameters
-1 Reservoir thickness
-2 Reservoir radius
-3 Encroachment angle
-5 Aquifer permeability
-2 Porosity
-4 Reservoir width
:Petrel
Petrel is one of the largest Softwares of E&P platform in Schlumberger, It is calling
.for Integration the data lest it should be dispersed or lose it's authenticity
As now you have a Visualized model of how the Reservoir Looks like, Now you Can
Precisely Choose the Best Coordinates for the Well to enhance Production with the
.Optimum Required Specification
In other words, open source software is available for the general public to use and
modify from its original design free of charge. What it means is that a piece of
software can evolve and be iterated upon by other developers anywhere in the world.
.Ideally, this means that the software is improved over time
Closed Source Software (CSS): the source code is not shared with the public for
.anyone to look at or change