4.1 Condition on delivery 4.3 Transport The transport units normally comprise individual panels and, At the time of dispatch, the UniGear panels are factory in exceptional cases, small groups of panels. The panels are assembled, the withdrawable parts are in the test position and each fitted with four lifting eyebolts. the doors are closed. Transport panels upright. Take the high centre of gravity The factory-assembled panels are checked for completeness into account. Only ever carry out loading operations when in terms of the order and simultaneously subjected to routine it has been ensured that all precautionary measures to testing (normally without AC voltage testing of the busbars) protect personnel and materials have been taken and use the to IEC publication 62271-200, and are therefore tested for following: correct structure and function. • Crane; The busbars are not assembled. The busbar material, • Fork-lift truck and/or; fasteners and accessories are packed separately. • Manual trolley jack.
4.2 Packing Loading by crane:
• Fit lifting ropes of appropriate load capacity with spring Available packing methods: catches (eyebolt diameter: 30 mm); • Polythene foil - storage time 1/2 year in clean and dry • Keep an angle of at least 60° from the horizontal for the environment ropes leading to the crane hook; • OSB boards - storage time 1/2 year in outdoor environment • Suspend the unit using ALL four eyebolts! according to IEC • Wood boxes - storage time 1 year in outdoor environment For detailed information on switchgear handling, please refer according to IEC to chapter 4.6.
According to the kind of transport and country of destination,
the panels remain unpacked or are welded in foil and packed in seaworthy crates. A drying agent is provided to protect them against moisture: • Panels with basic packing or without packing. • Panels with seaworthy or similar packing (including packing for containerised shipments): - Sealed in polyethylene sheeting - Transport drying agent bags included