Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
OKS GREASES 14 - 23
INDEX 36 - 38
TECHNICAL TERMS 39
SELECTION GUIDE 40
1
Address details for 10.31.0.77
Hostname praveenkumar.KLIND
Response Time 0 milliseconds
OKS 110
Micro-Refined
MoS2 Powder
OKS 111 • Aerosol version of OKS 110 for easy application on surfaces difficult to reach
Micro-Refined • Can be sprayed on evenly, without difficulty
MoS2 Spray
OKS 200
MoS2 Assembly
Paste
max
OKS 240
Anti-Seize
Compound
Special copper-based compound for protection of threaded connections
exposed to high temperatures or corrosive atmosphere in
• Threads
• Hot steam lines, turbines and power plants
Greases
formerly known as
OKS 241
Anti-Seize
Compound
• For lubricating and maintaining easy action of screw-joints subjected to high
emperatures and corrosive influences, e.g., armatures, turbines
White All-Round
Powders and Pastes
Paste,
Metal Free
2
®
• Reduction of friction and wear within a very wide Grey Operating -185°C to +450°C
temperature range Temperature Range
• Resistance to radiation and corrosive attack Density 4.80 g / cc at +27°C
• High degree of purity and completely free from Worked Penetration –
abrasive components — purity of a minimum Surface Coverage 5 - 10 m2 / kg
of 98% Drop Point –
• Particle size of 1.5 micron
• Extremely economical for all assembly and repair Grey Operating -35°C to +450°C
work Temperature Range (Upto +630°C, for applications
• Protects against wear, seizing and stick slip restricted to air access)
• Makes assembling and dismantling easy Density (OKS 200) 1.00 - 1.50 g / cc at +27°C
Unworked Penetration 265 - 295 ASTM D 217
Surface Coverage 40 m2 / kg
(OKS 200)
Drop Point None
• Prevents sintering, seizing or rust caused by high Copper Operating upto +600°C
temperatures even after prolonged operation brown Temperature Range (Only solid components can
• Provides optimum combination of screw withstand temperature
tightening torque and achievable screw pretension upto +600°C)
• Ensures reliable non-destructive dismantling Density 0.80 g / cc at +27°C
Worked Penetration 265 - 295 ASTM D 217
Surface Coverage –
Drop Point > +170°C ASTM D 2265
3
OKS POWDERS AND PASTES
MoX-Active Gear Oils
Extreme
Temperature
Paste • Nickel alloy-based anti-seize compound free from lead sulphides, chlorides
and fluorides
• Ideal product for extreme temperatures such as in boiler plants and cap
screws of oil burners, etc.
• Can be used where OKS 240 copper-based compound is not suitable or
desirable
Maintenance Products
OKS 260
White Assembly
Paste
• A non-staining lubricant used where dark lubricants are undesirable
• Used for machines and equipment in paper, printing, plastics,
textile and foodstuff industries
OKS 265
Chuck Jaw Paste
• Assembly lubrication of friction and sliding surfaces under heavy, jerky and
vibrating stress; particularly proven for the lubrication of chuck jaws of
machine tools and to prevent fretting corrosion
Dry Lubricants
White
High-Temperature
Paste A high-temperature lubricant used for parting lubrication in hot forming
operations such as
• Drop forging and hot extrusion moulding
• Hot rolling and bending of steel and non-ferrous metals
Good for sliding surfaces of production machinery like column guides of
forging process
Greases
OKS 1103
ELECTRONIC
• Moisture-proof dielectric seals for ignition systems, electrical systems and ELECTRONIC
Silicone Paste
electronic equipment
• Switches, cables and cable connectors
• Battery terminals, rubber and plastic
• Electric insulators and ceramic bushes
OKS CHISEL
PASTE
Powders and Pastes
High Temperature
Used for
paste to prevent
seizure and wear • Preventing seizure and premature wear of thread-in/plug-in tools,
wearing bushes used in pneumatic/hydraulic hammers
4
®
• Protects against seizing even at fluctuating Silver grey Operating -20°C to +1400°C
temperatures and under aggressive attack Temperature Range (Only solid components can
• Low consumption by applying a thin coating withstand temperature upto
+1400°C)
Density 1.25 g / cc DIN 51757
Worked Penetration 310 - 340 DIN 51804
Surface Coverage 40 m2 / kg
Drop Point None
• Best use for contamination free assembly Light Operating -45°C to +110°C
and long-time lubrication coloured Temperature Range
• High efficiency due to well balanced solid Density 1.15 g / cc DIN EN ISO 3838
lube combination Worked Penetration 260 - 290 DIN ISO 2137
• Manifold application wherever machine Surface Coverage –
components are contamination sensitive Drop Point >+160°C DIN ISO 2176
and work in humid environment
• Minimum consumption by applying a thin
coating (1kg covers approx. 40 sqm)
• It readily wets and adheres to dry surfaces Light Operating -50°C to +200°C
of metal, ceramic, rubber, plastic, etc. Temperature Range
• Protects and maintains flexibility and Density –
resilience of rubbers, plastics, etc. Worked Penetration 200 - 260 (UW) DIN ISO 2137
• Highly resistant to tracking and other effects Surface Coverage –
of corona discharge Drop Point >+250°C DIN ISO 2176
• Prevents flashovers, minimises electrical
leakages
– Dielectric strength of 10 kV / mm
• OKS Chisel Paste forms an efficient lubricating Copper-brown Operating -20°C to +1100°C
and anti-seizing film on the surface and prevents coloured paste Temperature Range (Only solid components can
these from normal or fretting corrosion withstand temperature upto
• It is an ideal lubricant for threaded connections +1100°C
and also wearing bushes, which are exposed to Density –
vibratory loads Worked Penetration 310 - 340
• It is equipped with special additives and solid Surface Coverage –
lubricants such as copper and graphite in an Drop Point –
aluminium complex base
5
OKS OILS AND LIQUIDS
MoX-Active Gear Oils
OKS 330
High-Speed Oil
Chain Protector,
Strong Adhesive
• Wear and corrosion protective lubricant for medium to fast-running chains
• Suitable for O-rings
OKS 345/1
Lubricating
Washable Oil
Non staining and washable oil for use in all machines
Greases
formerly known as • Specially suited for textile machinery which do not involve extreme loads,
OKS 345 Plus temperatures and speeds
High-Tempreture
Chain Oil
A two-phase lubricant with synthetic oil and additives providing thermal stability
and lubricity and Mox-Active additives offering extreme resistance to wear.
formerly known as Ideally suited for
OKS 352 • Chains exposed to high temperatures / heavy loads, water and steam
• Drying ovens, kilns and furnaces, drawing and varnishing plants
Oils and Liquids
OKS 93521 • Aerosol version of OKS 9352 for easy application on surfaces difficult to reach
High-Tempreture • Can be sprayed on evenly, without difficulty
Chain Oil Spray
formerly known as
OKS 3521
High-Tempreture
Chain Oil
Powders and Pastes
A high-temperature chain oil for the liquid lubrication of chains, joints, slide
ways, open bearings, etc. operating under high or low temperatures or heavy
loads as in
• Transport systems
• Drying and varnishing plants
• Chains operating in presence of saturated steam
• Chains in glass works, foundries, rolling mills and paint shops
6
®
OKS 300 with Mox-Active additives used in gear boxes Black Viscosity at +40°C 60 cSt approx. at +40°C
• Improves running in ASTM D 445 DIN 51562
• Smoothens and refines surfaces Density 0.90 - 0.95 g / cc at +27°C
• Reduces friction, temperature wear and noise level Flash Point >+200°C
• Protects gear teeth against damage (pitting) ASTM D 92
• Increases tool life if added to cutting oil
• Reduces noise level considerably in large gear
boxes
• Reduces overheating
• Provides very low internal resistance and does not Clear yellow Viscosity at +40°C 30 - 35 cSt
form any hard residues ASTM D 445
• Especially suited for open end machines in textile Density 0.95 - 0.98 g / cc at +27°C
industry Flash Point >+200°C
ASTM D 92
• Wear and corosion protective lubricant for medium Brownish- Viscosity at +40°C 470 cSt
to fast-running chains: non staining, noise transparent ASTM D 445
dampening and elastic Density 0.9 g / cc at +27°C
• Excellent penetrating power combined with Flash Point –
anti-fling properties ASTM D 92
• Resistant to road salt and sea water
• Ideal for high speed circular knitting machines Clear water Viscosity at +40°C 18 - 24 cSt
• Ideal for central lubrication systems white oil ASTM D 445
• Provides necessary lubrication to cam and needle Density 0.8 - 0.9 g / cc at +27°C
• In the event of cloth getting stained gets washed off Flash Point >150°C
easily ASTM D 92
• Clean lubrication with minimum evaporation Green oil Viscosity at +40°C 330 - 360
loss ASTM D 445
• No formation of residues Density 0.85 - 0.96 g / cc at 27°C
• Protection against wear Flash Point >+200°C
• Emergency lubrication through Mox-Active ASTM D 92
additives
• Performance over a wide temperature range
• Available in four different viscosities
• Good wetting and adhesive properties and Clear, Viscosity at +40°C 330 - 360
does not dry or drip even at high yellow oil ASTM D 445
temperatures Density 0.90 - 0.96 g / cc at +27°C
• Leaves no residues Flash Point >+240°C
• Compatible with paints and does not cause ASTM D 92
any discolouration, cratering or any surface
disruptions
7
OKS OILS AND LIQUIDS
MoX-Active Gear Oils
High-temperature
Chain Oil
A high-temperature chain oil for the liquid lubrication of chains, stenters, joints,
slide ways, open bearings, etc. operating under low or high temperatures
(upto +210°C) or heavy loads as in
• Transport systems
• Drying and varnishing plants
• Chains operating in presence of saturated steam
• Chains in glass works, foundries, rolling mills and paint shops
Maintenance Products
OKS 370
Multi-Purpose
Oil for the
Food Industry
RAY
pro AIRSP
NSF H1
A multi-purpose oil for the liquid lubrication of
• Valve seals, O-rings, collars and drives
• Piston rods and guide ways
• Joints frame and roller chains in all areas of food, brewery and beverage
industry
• Needles in knitting machines
• Cutting knives in paper industry
Dry Lubricants
Adhesive Chain
Lubricant
OKS 640
Multi-Functional
Fluid
formerly known as
OKS 600
• Easy and quick dismantling of seized screws, bolts, chain links, joints, levers,
Multi-Functional
springs, valves, locks, hinges, etc.
Fluid Spray
• Starting wet engines
Powders and Pastes
OKS 9630
Spindle Lubricating
Oil
A spindle lubricating oil for lubrication of speed frame long collar spindles
formerly known as
OKS 600 T
8
®
• Good wetting and adhesive properties and does Clear, Viscosity at +40°C 220 cSt
not dry or drip even at high temperatures colourless oil ASTM D 445
• Leaves no residues Density 0.90 - 0.98 g / cc at +27°C
• Long-term lubrication without wear Flash Point >+260°C
• Compatible with paints and does not cause any ASTM D 92
discolouration, cratering or any surface disruptions
• Good protection against wear because of Brown Viscosity at +40°C 270 - 330 cSt
Mox-complex compounds ASTM D 445
• Neutral to O-rings Density 0.880 - 0.920 g / cc at +27°C
• Has a capacity to penetrate to the innermost friction Flash Point >+150°C
parts of chains and ropes ASTM D 92
• Forms a protective film which does not get thrown
off or washed off
• Gives excellent lubricity to chains and wire ropes
under all adverse conditions
• Exteremely adhesive
• Resistant to water, salt water and gives excellent
protection against corrosion
• Good protection against wear because of
Mox-complex compounds
• Easy to apply
• Good penetrating properties
• A single, handy product to make a worker’s life easy Clear, Viscosity at +40°C 1 - 5 cSt
• Loosens rust rapidly and inhibits corrosion brown oil ASTM D 445
• Displaces moisture Density 0.75 - 0.85 g / cc at +27°C
• Restores wet electrical contacts Flash Point >+45°C
• Lubricates precision components ASTM D 92
• Cleans complicated and delicate assemblies
• Provides excellent lubrication, reduces wear and the Clear, Viscosity at +40°C 8 - 12 cSt
product remains in the spindle for a long time, brown oil ASTM D 445
thereby reducing frequency of lubrication Density 0.80 - 0.86 g / cc at +27°C
• Provides good corrosion protection to the long collar Flash Point >+50°C
ASTM D 92
9
OKS OILS AND LIQUIDS
MoX-Active Gear Oils
Series
Silicone Oils
As a silicone based mould release agent for injection moulding and extrusion
of plastics
• As a lubricant for the insertion of rubber profile sections in window and door
systems
• Made out of plastic and aluminium
• As a protective film to prevent the sticking of plastic sheets in presses
• As a lubricant for cutting edges of tools used in cutting paper and cardboard
Maintenance Products
OKS 3430
OKS 3440 A Synthetic Gear and high temperature oil for the lubrication of
OKS 3450 • All kinds of bevel and spur gears
OKS 3460 • Plain and roller bearings
OKS 3470 • Chains and gear couplings
• Worm gears with steel / bronze combination
OKS Synthetic Oils
Dry Lubricants
High temperature
lubricant, synthetic
• At high temperatures, high pressure and under water influence
OKS 93700
Synthetic Food
Grade Oil
For the lubrication of
formerly known as • Chains
OKS 3700 • Cutting knives and other equipments in all sectors of the food, brewery
and beverage industry
Greases
OKS 93701 • Aerosol version of OKS 93700 for easy application on surfaces difficult to
Food Grade Oil reach
Spray • Can be sprayed on evenly, without difficulty
formerly known as
OKS 3701
OKS 3720
Oils and Liquids
Synthetic
Grade Oil for the
Food Industry A fully synthetic gear oil for the lubrication of
• All enclosed gears in all areas of the food, brewery industry where
NSF H1 physiologically harmless lubricants are required
• Chains, hinges, slide ways, roller and plain bearings, armatures, etc.
OKS 3730
Synthetic
Gear Oil for the
Food Industry A fully synthetic gear oil for the lubrication of
Powders and Pastes
• All enclosed gears in all areas of the food, brewery industry where
NSF H1 physiologically harmless lubricants are required
• Chains, hinges, slide ways, roller and plain bearings, armatures, etc.
10
®
• High efficiency because of excellent netting of the Colourless Viscosity at +40°C OKS 1050/0 - 50 cSt
surface and building of extremely thin lubricating liquid ASTM D 445 OKS 1035/1 - 350 cSt
films OKS 1050/1 - 500 cSt
• Seperating effect with antistatic properties OKS 1010/2 - 1000 cSt
• Manifold applications for permanent lubrication, OKS 1020/2 - 2000 cSt
protection, maintaining and impregnation Density 0.95 - 0.97 g / cc at 25°C
• Neutral behaviour against plastic and elastomers Flash Point >+250°C
• Resistant against water and atmospheric ASTM D 92
influences
• Special synthetic oil resistant to aging and Yellow oil Viscosity at +40°C OKS 3420 : ISO VG 100
oxidation ASTM D 445 OKS 3430 : ISO VG 220
• Good viscosity-temperature behaviour OKS 3440 : ISO VG 320
• Excellent high temperature abilities OKS 3450 : ISO VG 460
• Friction reducing, high-load carrying OKS 3460 : ISO VG 680
capacity and excellent wear protection OKS 3470 : ISO VG 1000
• Neutral behaviour to non-ferrous metals DIN 51562
Density 1.05 g / cc at 20°C
DIN EN ISO 3838
Flash Point >+280°C
ASTM D 92
• Detention-strong lubricant with minimum Reddish Viscosity at +40°C 3800 cSt at 40°C DIN 53015
Evaporation at high temperatures ASTM D 445
• No accumulation of arrears Density 0.92 g / cc
• Works steadily at water and steam Flash Point >+230°C
ASTM D 92
• Physiologically harmless and long service life due Yellowish medium Viscosity at +40°C 220 cSt
to its good oxidation and ageing stability viscous oil ASTM D 445 DIN 51562
• Resistant to hot and cold water, steam, alkaline and Density 0.85 g / cc at +27°C
acid disinfection and cleaning agents used in food Flash Point >+204°C
industry ASTM D 92 DIN ISO 2592
• Long-term lubrication due to long service life
• Food grade approval by NSF: Reg. No. 135752 H1
• Physiologically harmless and long service life due Light Yellow Viscosity at +40°C 460 cSt
to its good oxidation and ageing stability ASTM D 445
• Resistant to hot and cold water, steam, alkaline and Density 0.86 g / cc at +27°C DIN 51757
acid disinfection and cleaning agents used in food Flash Point >+218°C
industry ASTM D 92
• Long-term lubrication due to long service life
• Food grade approval by NSF: Reg. No. 135753 H1
11
OKS OILS AND LIQUIDS
MoX-Active Gear Oils
OKS 3760
Multi-Purpose
Oil for the
Food Industry
NSF H1
A gear oil for the lubrication of
• All enclosed gears in all areas of the food, brewery industry where
physiologically harmless lubricants are required
• Chains, hinges, slide ways, roller and plain bearings, armatures, etc.
Maintenance Products
OKS 3770
Hydraulic
Oil for the
Food Industry
A fully synthetic hydraulic oil for the application in all areas, where
NSF H1 physiologically harmless fluids are required
formerly known as
OKS Vanishing Oil
OKS PS 200
Premium Synthetic
Greases
air compressor
lubricant • Reciprocating compressors max
8000 hours
OKS Sludge
EX
Compressor sludge/
• Compressors: Rotary screw air, gas and refrigeration, centrifugal
varnish conditioner
• Gearboxes, diesel and natural gas engines
• Reduces maintenance cost eliminates the need for compressor
disassembly for cleaning
Powders and Pastes
12
®
• Physiologically harmless and long service life due Colourless Viscosity at +40°C 100 cSt
to its good oxidation and ageing stability ASTM D 445 DIN 51562
• Resistant to hot and cold water, steam, alkaline and Density 0.84 g / cc at +27°C
acid disinfection and cleaning agents used in food Flash Point >+216°C
industry ASTM D 92
• Long-term lubrication due to long service life
• Food grade approval by NSF: Reg. No. 129964 H1
• Through optimum additivation against oxidation Colourless Viscosity at +40°C 50 cSt at +40°C
and aging economically extended operating times ASTM D 445
• Resistant to hot and cold water, steam, common Density 0.84 g / cc at 20°C
disinfection and cleaning agents Flash Point >+240°C
• Food grade approval by NSF: Reg. No. 129962 H1 ASTM D 92
• Rated to provide superior service for 8000 hours, Viscosity at +40°C 67.5 cSt
continues to protect from wear deposit where ASTM D 445
other lubricants fail Density 0.85 - 0.89 g / cc at 25°C
• Compatible with most rotary-screw air compressor Flash Point 272°C
lubricants except silicone or polyglycol based ASTM D 92
lubricants
13
OKS GREASES
MoX-Active Gear Oils
OKS 400
MoS2 Multi-purpose
Heavy-Duty Grease
Used in the lubrication of
• Journal and roller bearings
• Threaded spindles
• Highly stressed joints
• Small gears
• Knock-out splined shafts
Maintenance Products
OKS 403
Grease for
Saline Conditions
• Lubrication of open gears, wire ropes, plain and ball bearings, hinges and
winches in ship cranes, under water and off-shore equipment
• Wet areas of textile plants
OKS 410
MoS2 High-
Performance,
Dry Lubricants
OKS 416
Low-Temperature
High-Speed Grease
Greases
High-Temperature
Grease
An extreme-temperature, non-melting grease used in
• Bearings of lacquering stoves
• Drying ovens and mixers
• Vulcanising plants
• Furnaces, etc.
Powders and Pastes
14
®
Black, grey, • Safety lubricant Mineral oil, NLGI Class DIN 51818 2
soft • Extension of relubricating intervals Lithium soap
• Reduction in wear and improved sealing of stuffing with Worked Penetration 265 - 295
boxes Mox-Active ASTM D 217
Additives Drop Point ASTM D 2265 >+170°C
Operating Temperature -30°C to +120°C
Range
Beige • Best as a water resisting grease for parts Mineral oil, NLGI Class DIN 51818 1-2
above and below water surface Calcium
• High efficiency by providing optimal wear and soap Worked Penetration 285 - 315
corrosion protection DIN ISO 2137
• Provides excellent corrosion protection of all types Drop Point ASTM D 2265 >+110°C DIN ISO 2176
of moving parts in saline atmosphere or being Operating Temperature -25°C to +80°C
subjected to continuous water impact like at Range
channel works
Grey Black • Very high load carrying capacity Mineral oil, NLGI Class DIN 51818 2
• Performs well in rough operating conditions and in Lithium soap Worked Penetration 265 - 295
humid atmospheres with ASTM D 217
• Extension of relubricating intervals Mox-Active Drop Point ASTM D 2265 >+170°C
• Four ball load of 4000 N Additives Operating Temperature -10°C to +120°C
• Optimum protection against corrosion Range (For a short time up to
+150°C)
Yellow colour • Dynamic light noise proofed long-term lubrication Ester, NLGI Class DIN 51818 2
grease Mineral oil, Worked Penetration 265 - 295 DIN ISO 2137
• Ideal at very high speed and artic conditions Lithium soap Drop Point >+190°C DIN ISO 2176
• High efficiency through optimal formulation Operating Temperature -50°C to +120°C
• Multifunctional application beside the regular range Range
of performance for greases
• DN Factor of 1,000,000
• No discernable change of consistency at low
temperatures or high speeds
• Oxidation stable and resistant against cold and hot
water
Black • Ensures sufficient and economical lubrication at Special NLGI Class DIN 51818 2
homogeneous, high temperatures Mineral oil, Worked Penetration 265 - 295
smooth • No drop point, hence it does not melt or run out Inorganic ASTM D 217
• Long-term lubrication of greasing points subjected thickener Drop Point ASTM D 2265 None
to high temperatures Operating Temperature -20°C to +160°C
Range
15
OKS GREASES
MoX-Active Gear Oils
High-Temperature,
Multi-Purpose
Grease A high-temperature, multi-purpose grease used for lubricating
• Highly stressed gears and corrosive operating conditions
• Points exposed to high pressures, high shock loads and high temperatures
• Chains equipped with bushings operating in conveyors
• Bearings on annealing furnace, drying plants, robots, etc.
• Machinery in canning industry, steam sterilisation, etc.
Maintenance Products
Universal Grease
for Long Life
Lubricating
OKS 423
AY
pro AIRSPR
High-Temperature
Dry Lubricants
Grease
A high-temperature grease for the lubrication of roller and plain bearings in a
wide temperature range and corrosive influences like in
• Continuous casting facilities
• Transport rollers in continuous kilns, forges and drying kilns
• Heated rollers, tar machines, COOL, and conveyor systems
Synthetic
High-Temperature
Grease A synthetic high-temperature grease for the lubrication of
• Roller and plain bearings subjected to high temperatures, corrosive
environment and sliding speeds
Greases
OKS 428
Multi-Purpose
Fluid Grease
A synthetic fluid grease for
• Gears boxes which cannot be filled with oil
Oils and Liquids
16
®
Light brown • Lubricates, seals and dampens noise level in Mineral oil, NLGI Class DIN 51818 1-2
grease lubricated gears, ball and plain bearings organic Worked Penetration 290 - 320
• Ideally suited for low speed and heavily loaded polymer ASTM D 217
bearings, sealed insufficiently soap Drop Point >+230°C DIN ISO 2176
• Extension of relubricating intervals Operating Temperature -10°C to +160°C
• DN Factor 500, 000 Range
Light beige • High efficiency even under the impact of water Synthetic oil, NLGI Class DIN 51818 2
• Best use under extreme stress Barium Worked Penetration 265 – 295
• Economic because of low-wear operation and complex DIN ISO 2137
long re-lubrication intervals soap Drop Point >+230°C DIN ISO 2176
• Extremely well suited for a wide temperature range, Operating Temperature -40°C to +180°C
high loads, vibrations, high speed and open Range
air conditions
Light brown • Adhesive, water resistant with high corrosion Mineral oil, NLGI Class DIN 51818 1
protection properties Poly Urea Worked Penetration 310 - 340
• Resistance against water and aggressive agents DIN ISO 2137
with good sealing properties Drop Point >+240°C DIN ISO 2176
• Good to handle with central lubrication system Operating Temperature -20°C to +180°C
• Effective wear protection through special EP Range Short term +200°C
additives
Light Coloured • The synthetic grease remains in smooth condition Polyalphaolefin, NLGI Class DIN 51818 1-2
Smooth without forming hard deposits Organic Worked Penetration 290 - 310
Grease • Performs efficiently at high temperatures - even thickner DIN ISO 2137
when it exceeds rated temperature for short periods Drop Point >+240°C DIN ISO 2176
of time, it leaves only insignificant residues Operating Temperature -30°C to +200°C
• Best used for extremely temperature stressed Range Short term upto +230°C
bearings exposed to corrosive environment
• Maintains high efficiency even in the presence of
water, shields bearings from harmful contamination
Light coloured • Wear reduction even at high loads Synthetic oil, NLGI Class DIN 51818 00
• Long service life Lithium soap Worked Penetration 400 - 430 DIN ISO 2137
• Resistance to oxidation and ageing Drop Point >+160°C DIN ISO 2176
• Avoids leakages in the event of minor seal damages Operating Temperature -30°C to +120°C
• Flowing property ensures steady flow back from Range
inner casing walls
Natural A combination of special additives gives Mineral oil, NLGI Class DIN 51818 2
Coloured • Corrosion protection and high ageing resistance Aluminium Worked Penetration 265 - 295 DIN ISO 2137
• Excellent EP properties even at high complex Drop Point >+240°C DIN ISO 2176
temperatures soap Operating Temperature -25°C to +190°C
Range Short term upto +210°C
17
OKS GREASES
MoX-Active Gear Oils
OKS 462
Grease for Hot and
Cold Water Fittings
A special grease for the “for life” lubrication of
• Sanitary fittings for hot water under pressure
• Overflow fittings of electrical hot water apparatus and pressure rinsing
devices
• Pressure reducers for cold water
• For maintaining the sliding capacity and trouble-free functioning of spindles
in heating radiator thermostat valves
Maintenance Products
OKS 470
White Universal
Heavy-Duty Grease
White non-staining, heavy-duty grease used for the lubrication of
NSF H2 • Highly stressed plain, ball, anti friction and socket joint bearings
• Splined shafts and guide ways on machines used in food, beverage,
textile, and paper industries
OKS 475 HS
ELECTRONIC
High-Speed
Bearing Grease
With a DN factor of 1,000,000 this is ideally suited for
Dry Lubricants
OKS 475
Food Grade
Grease
A food grade grease ideal for
NSF H2 • Filling and packing machinery and sliding points at low temp.
• Valves and bearings in the food industry where there is a likelihood of the
grease coming in contact with foodstuff
• Breweries as a low temperature grease
• Applications where the grease comes in contact with water, solvent, rubber
Greases
and plastics
OKS 476
Multi-Purpose
Grease for the
Food Industry A universal food grade grease that finds a variety of applications in food and
beverage industries like
NSF H1 • Roller and plain bearings as well as hinges and chains
• Linear driving gears
• Armatures, molds, seals, etc.
Oils and Liquids
OKS 479
High-Temperature
Grease for the max
Food Industry A high-temperature, food grade grease which can be used in areas exposed to
high temperatures like
NSF H1 • Roller and plain bearings
• Hinges, guide ways and chains
• Armatures, seals, molds exposed to hot and cold water
Powders and Pastes
Synthetic
High-Temperature
Grease For the lubrication of bearings and sliding parts exposed to
• High temperature
• Heavy loads
• Slow and moderate speeds
For the lubrication of oven trolley bearings, conveyor bearings, calendar roll
bearings, induced draft fans, drier bearings, etc.
formerly known as
OKS 480
18
®
Beige • Excellent adhesion and sealing capacity Synthetic oil, NLGI Class DIN 51818 2
• Resistant to hot and cold water and steam Lithium Worked Penetration 265 - 295 DIN ISO 2137
• Ageing resistant hydroxy Drop Point ASTM D 566 –
• Lime resistant stearate Operating Temperature -20°C to +150°C
• Resistant against acid and alkaline disinfectants Range
and cleaning products
White, smooth • Improved surface fininsh of goods Mineral oil, NLGI Class DIN 51818 2
• Improved service life of tools Lithium soap, Worked Penetration 265 - 295 DIN ISO 2137
• High efficiency due to optimal formula of solid White solid Drop Point >+195°C DIN ISO 2176
lubes providing good separating effects lubes Operating Temperature -30°C to +120°C
• DN Factor of 300,000 Range
• NFS Reg. No. 137707 H2
Light Coloured • Very low internal friction and extremely low Synthetic oil, NLGI Class DIN 51818 2
starting resistance Lithium Worked Penetration 265 - 295
• Does not get thrown off during operation hydroxystearate ASTM D 217
• Can be used at low temperatures Drop Point ASTM D 566 >+180°C
Operating Temperature -50°C to +140°C
Range
Light Coloured • Non-toxic, tasteless and odourless Synthetic oil, NLGI Class DIN 51818 2
• Does not get washed off by water or solvents Lithium Worked Penetration 265 - 295
• Prevents embrittling of rubber parts at low hydroxystearate ASTM D 217
temperatures Drop Point ASTM D 566 >+185°C
• Does not affect foaming properties of beer Operating Temperature -60°C to +120°C
• Food grade approval from LGA Range
• DN Factor of 1,000,000
• NSF Reg. No. 137708 H2
White, • Universal food grade grease White oil, NLGI Class DIN 51818 2
soft grease • Resistance to cold and hot water, acid and alkaline Aluminium Worked Penetration 265 - 295 DIN ISO 2137
disinfection complex Drop Point >+250°C DIN ISO 2176
• Long service life due to very good oxidation and soap Operating Temperature -20°C to +120°C
ageing stability Range
• NSF Reg. No. 137619 H1
Yellowish, • Resistance to cold and hot water, acid and Synthetic oil, NLGI Class DIN 51818 1
white, soft alkaline disinfection and cleaning agents Aluminium Worked Penetration 310 - 340 DIN ISO 2137
grease • Long service life due to very good oxidation complex Drop Point >+200°C DIN ISO 2176
and ageing stability soap Operating Temperature -25°C to +160°C
• Strong adhering properties Range
• Food grade approval by NSF: Reg. No. 135675 H1
Light green, • Resistant to hot and cold water Synthetic oil, NLGI Class DIN 51818 2
soft, • Does not contain any silicones Lithium soap Worked Penetration 265 - 295
homogeneous • Used for applications involving painting or any other ASTM D 217
surface treatments Drop Point ASTM D 2265 None
Operating Temperature -30°C to +200°C
Range
19
OKS GREASES
MoX-Active Gear Oils
OKS 1110 / 6
Silicone Valve and
Packing Grease A silicone grease used for
• Lubrication of stop cocks and valve seals
NSF H1 • Cold and hot water valves in plumbing and heating
• Lubrication and protection of O-rings, rubber seals and plastic parts
Maintenance Products
OKS 1112
Silicone Greases
for Vacuum Taps
A white translucent silicone grease for the lubrication of
• Shut-off valves and taps of industrial vacuum plants and laboratory
equipment
• Shut-off devices in cases where other greases are insufficient
Silicone Grease
High-Temperature
Silicone Grease
Greases
OKS 1184
Silicone Grease
Extreme
Temperature
Bearing Grease To lubricate plain and anti-friction bearings under extremely high-temperatures
as in
NSF H1 • Tunnel ovens, rollers in conveyor ovens
Powders and Pastes
20
®
Water White • Non-toxic, non-melting and a good adhesive sealing Silicone oil, NLGI Class DIN 51818 3
• Constant consistency over a wide temperature Inorganic Worked Penetration OKS 1110 : 220 - 250
range thickener ASTM D 217 OKS 1110/6 : 300 - 320
• Resistant to hot / cold water as well as to acetone, Drop Point ASTM D 2265 >+250°C
ethanol, ethylene glycole, glycerine and methanol Operating Temperature -40°C to +260°C
• Food grade approval from the Federal Health Range
Department of Germany
• Food grade approval by NSF: Reg. No. 124381 H1
White, • High resistance to heat Silicone oil, NLGI Class DIN 51818 2
translucent • Excellent resistance to solvents and chemicals Lithium soap Worked Penetration 265 - 295
• No corrosive effect on metals ASTM D 217
• No plasticizing effect on rubber and plastics Drop Point ASTM D 2265 –
• Vacuum - 10-6 Torr Operating Temperature -40°C to +200°C
Range
White, • Serves in wide temperature range Silicone oil, NLGI Class DIN 51818 2
translucent • Stable consistency (-40°C to +200°C) Inert filler Worked Penetration 220
• Thermally stable and chemically inert ASTM D 217
• Water repellant and resistant to solvent Drop Point ASTM D 2265 –
Operating Temperature -40°C to +200°C
Range
• Stable against all kinds of oil inorganic acid vapours Silicone oil, NLGI Class DIN 51818 1-2
• Resistant to oxidation Lithium Worked Penetration 290 - 320 DIN ISO 2137
complex Drop Point >+250°C DIN ISO 2176
soap Operating Temperature -50°C to +180°C
Range
Brown • Externally stable and inert lubricant Silicone oil, NLGI Class DIN 51818 –
• Tribological surface finish with extremely low Lithium soap Worked Penetration 240 - 280 DIN ISO 2137
friction value and a high wear resistance Drop Point >+205°C DIN ISO 2176
• Operation under wide range Operating Temperature -40°C to +205°C
• Good corrosion protection properties Range
• Long term lubrication
White, • Long-term lubrication of bearings subject to high- Synthetic oil, NLGI Class DIN 51818 2
soft grease temperatures Inorganic Worked Penetration 265 - 295 DIN ISO 2137
• High efficiency due to optimal, modern product thickner Drop Point ASTM D 566 Not measurable
formulation perfluorinated Operating Temperature -25°C to +280°C
• Manifold applications beyond performance of Range
normal greases
• Food grade approval by LGA
• Food grade approval by NSF: Reg. No. 124380 H1
21
OKS GREASES
MoX-Active Gear Oils
OKS Used to
HD 1250 MO • Lubricate roller and plain bearings exposed to high or severely high load
• Lubricate low speed bearings subjected to shock loads
High Performance • Reduce friction and wear on mechanisms exposed to very high loads and to
EP Grease prevent bearing abrasive build up and corrosion
• Provide lubrication also in the presence of water
Grease
Maintenance Products
22
®
Grey - Black • Solid lubricants ensure emergency running Mineral oil, NLGI Class DIN 51818 2
properties Lithium Worked Penetration 265 - 295
• High base oil visocity and water resistance hydroxystearate ASTM D 217
soap texture is specifically suited for heavily Drop Point ASTM D 2265 >+180°C
loaded low speed bearings operating under Operating Temperature +20°C to +120°C
normal and possibly shock load conditions Range
• Four ball test weld load of >4000 N
White • Good resistance to oxidation Silicone oil, NLGI Class DIN 51818 –
coloured, • Can withstand a wide range of operating Lithium soap Worked Penetration 290 - 330
Smooth temperature ASTM D 217
• Provides long life and trouble free maintenance Drop Point ASTM D 2265 >+212°C
Operating Temperature -40°C to +175°C
Range
23
OKS DRY LUBRICANTS
MoX-Active Gear Oils
OKS 500
MoS2 Bonded
Coating,
Heat Curing For dry lubrication of
• Slide ways
• Joints
• Ball and socket joints and similar components where occasional movements
are allowed
MoS2 Bonded
Coating,
Fast Curing
OKS 511 • Aerosol version of OKS 510 for easy application on surfaces difficult to
MoS2 Bonded reach
Coating Spray, • Can be sprayed on evenly, without difficulty
Fast Curing
Dry Lubricants
MoS2 Water-Based
Bonded Coating
Air Curing • For long-term lubrication similar to self lubricating materials for bearings
• For wear inhibiton with prolonged service life of sliding surfaces
Aqueous Graphite
Bonded Coating
Greases
Air Curing
• High temperature chain lubrication in annealing furnaces, hot extrusion,
NSF H2 moulding and forging of non-ferrous metals
• Dilutable with water, depending upon the application
MoS2 Bonded
Coating,
Oils and Liquids
Heat Curing
Dry lubrication used in those applications where there is a low sliding speed &
high surface pressure such as in
• Levers, slideways, linear guide systems, spindles, cam shafts, springs, ball
joints, plain bearings, hinges, forming operations, splined shafts, open
gears, enclosed gears and precision mechanics etc.
Powders and Pastes
24
®
Dull black • High efficiency due to good adhesion on preheated Organic Optimum Layer 7 - 15 mm
surface Thickness
• Increased wear protection of sliding parts which Curing Time 1 hour approx.
cannot be lubricated by other materials At +150°C
• Same friction value of coating under highest Operating Temperature -70°C to +250°C
pressure Range
• Economical due to low consumption
(1 kg covers 10 - 20 m2)
Dark grey • Dries within 5 minutes at room temperature Inorganic Optimum Layer 10 - 15 mm
• Ideal for high and low temperatures Thickness
• For vacuum points of difficult access Curing Time 30 minutes approx.
• Very low friction and high load carrying capacity at room temp.
Operating Temperature -180°C to +450°C
Range
Dull black • High efficiency due to good adhesion Water Optimum Layer –
• Same friction value of coating under highest Thickness
pressure Curing Time 1 - 2 hous
• Increased wear protection of sliding parts at room temp.
which cannot be lubricated by other materials Operating Temperature -35°C to +450°C
• Economical due to low consumption Range
(1 kg covers 15 m2)
• Environment friendly due to water base,
Odour-free
Dull Black • Long-term lubrication with excellent protection Organic Optimum Layer 10 - 30 mm
against wear for increased service life of slide areas Thickness
• Fully effective even after longer downtimes Curing Time 60 minutes
• No adherence of dust and dirt at +180°C to +200°C
• Increased protection against wear of otherwise not Operating Temperature -70°C to +250°C
accessible slide areas Range
25
OKS MAINTENANCE PRODUCTS
MoX-Active Gear Oils
OKS 91621 • Extends nozzle life and ensures free flow of wire
• Spatters from the surrounding areas can be
removed easily where spray has been applied
• As an anti-spatter spray in welding • Easy removal of sliding spatter by brushing
applications • Provides a quick, easy way to prevent
adherence of spatter of metal surfaces during
welding and eliminates the need for chiseling,
grinding or wire brushing after welding
• It prevents the obstruction of automatic and
formerly known as semi-automatic welding process
OKS Anti-spatter Spray
Maintenance Products
marine atmospheres
• Protects plastic injection moulds
formerly known as
used to manufacture precision
OKS 360 electronic components
marine atmosphere
• The protection of plastic injection
formerly known as moulds used to manufacture
OKS 361 precision electronic components
26
®
Functional, contacts
Fluid Spray • Loosens rust rapidly & inhibits corrosion
effectively
• Lubricates precision components & amazing
penetrating property helps it to reach otherwise
A multifunctional spray for inaccessible areas
• Loosening of rust, corrosion protection and care of metal
parts
• Easy and quick dismantling of seized or corroded screws,
formerly bolts, joints, etc. & eliminating squeaking noises from
known as appliances
OKS 601 • Displacing moisture in electrical devices
OKS 91361 A silicone-based mould release spray that can be used as a • Colourless
Mould • Parting agent for injection moulds and extrusion of plastics • Chemically neutral
Release • Protective film preventing sticking of plastic • Non-toxic, anti-static spray on film
Spray sheets in process • Versatile parting and lubricating aid wherever
Also used rubber and plastic rub against each other or
NSF H1 • As a lubricant for cutting edges of tools for cutting paper, against metals
cardboards and vanes • Non-staining
• For the lubrication of rubber and plastic components • NSF Reg. No. 129484 H1
formerly
known as
OKS 1361
27
OKS MAINTENANCE PRODUCTS
MoX-Active Gear Oils
OKS 2110 • Excellent corrosion protection for • Provides excellent protection against high
castings, forgings, tools, shafts and humidity, marine atmosphere and acid fumes
Short term other semi-finished and machined ( as from pickling baths)
corrosion protection parts and components during • In most cases removal is not necessary before
liquid with solvent temporary storage between subsequent operations
base for indoor machining operations and transit • Can be top coated with normal paints and
applications epoxies
28
®
OKS 2160 • For protection of dies, valves, forgings, castings, • Effective for a wide range of applications,
stampings, pipes, fasteners, structurals, machinery, under a wide variety of outdoor conditions
Long term
shafts etc., during storage and shipping in outdoor • The film is thermally stable
corrosion protection
environments including harsh marine atmospheres • It has excellent salt spray rating and is max
decorative coating
Alu-Metallic
• Can be applied on all kinds of materials
Spray
A good corrosion protection as well as decorative spray for • High efficiency due to high share of
• Intake and exhaust manifolds aluminium powder
• Exhaust pipes and vehicle silencers • Economical and easy to use
• Furnaces, boilers, flanges, tank construction, pipes and
installations for air conditioning and ventilation appliances
29
OKS MAINTENANCE PRODUCTS
MoX-Active Gear Oils
Refrigerating Spray
• Non-inflammable
• Used for prevention of heat damages • Non-toxic and harmless
when soldering electronic components • Does not affect plastics, rubbers adversely
and protection of adjacent areas • Can cool surfaces immediately even down
during welding process To -45°C depending on time of spraying
• Short-term temperature adjustment
and enables a quick indication of hot
spots in electronic components
• Cooling the inside parts of assemblies
Oils and Liquids
prior to dismantling
• Small shrink fits
Leak Detector
formation of bubbles at the leaking spot
Spray,
• Detection of leaks at pipes and • Saves energy and warns of gas loss
Frost Proofed
containers under pressure, e.g., • Non toxic, no corrosive effects
to -15°C
compressors, gas bottles, armatures,
blocking valves, gas masks,
autogeneous and inert-gas welding
Powders and Pastes
30
®
31
s
s
ngs
sys uide
con eaded
a rs
aw s
m e c i si o n
ics
tion
i ce s g
s
tool
ns
cs
ft
s
op e i n g
gea d
ts
ro p e
n
dl es
s
n ed
sha
ng s
s
w ay
es
s
es
lose
i ns
b ea l e r
es
i
ratio
suri
rs
ring
join
b ea n
h an
n ge
ri n g
sfiti
ls
raul
fts
tem
rs
rs
ar g
n ec
form
ck j
p l ai
b ra k
hi ng
in g
wor
leve
p re c
sea
va l v
rol
ch a
sp l i
spri
gea
sh a
spin
thr
e
cam
e nc
mea
pres
w i re
d ev
h yd
b all
slid
o pe
ch u
l i ne
cutt
Page
OKS Product
Pastes
OKS 110 / 111 02
OKS 200 / 201 02
OKS 240 / 9241 02
OKS 246 02
OKS 250 02
OKS 255 04
OKS 260 04
OKS 265 04
OKS 280 04
OKS Chisel Paste 04
Oils and Liquids
OKS 300 / 301 06
OKS 330 06
OKS 340 06
OKS 345/1 Plus 06
OKS 9352 06
OKS 93521 06
OKS 352 / 1 06
OKS 352 / 2 08
OKS 370 08
OKS 450 / 451 08
OKS 640 08
OKS 1000 10
OKS 3420/30/40/50/60/70 10
OKS 3541 10
OKS 93700 / 93701 10
OKS 3720 10
OKS 3730 10
OKS 3760 12
OKS 3770 12
®
Mox-Active Gear Oils 31
s
s
n gs
sys uide
con eaded
a rs
aws
mec ision
i cs
tion
i ce s g
s
tool
ns
s
ft
s
o pe ing
gea d
ts
ro p e
n
c
d l es
s
ned
sh a
n gs
s
wa y
es
s
es
lose
s
b ea l e r
es
a uli
ratio
suri
rs
ring
jo in
be a n
ha n
n ge
ri n g
sfiti
ls
fts
tem
rs
rs
in
ar g
ne c
form
ck j
plai
br a k
hin g
in g
w or
l e ve
p re c
sea
va l v
rol
cha
s pl i
spri
gea
sh a
sp i n
thr
e
cam
e nc
mea
p re s
w i re
d ev
hryd
b al l
slid
o pe
ch u
l i ne
cutt
Greases
OKS 400 14
OKS 403 14
OKS 410 14
OKS 416 14
OKS 418 14
OKS 420 16
OKS 422 16
OKS 423 16
OKS 424 16
OKS 428 16
OKS 432 16
OKS 462 18
OKS 470 18
OKS 475 HS 18
OKS 475 18
OKS 476 18
OKS 479 18
OKS 9480 18
OKS 1110 ; 1110 / 6 20
OKS 1112 20
OKS 1114 20
OKS 1122 20
OKS 1140 20
This Product Application guide does not contain the application areas of all the products in our range. A complete list of all our products is
available from pages 02-31 in this catalogue
The application areas are indicative. It is recommended that the product be tried before use. Please consult your nearest OKS Engineer /
Distributor
®
33
s
s
ng s
sys uide
con eaded
a rs
aw s
mec ision
i cs
tion
i ce s g
s
to l
ns
i cs
ft
ys
o p e ing
gea d
ts
ro p e
n
d les
s
ne d
sh a
gs
s
es
s
es
l o se
s
b ea l er
ratio
rsu i
rs
ring
jo in
bea n
ha n
n ge
ri n g
sfiti
e wa
ls
ra u l
fts
tem
rs
rs
in
e
ar g
ne c
form
ck j
p la i
brak
hi n g
ing
wor
leve
p re c
sea
valv
ro l
cha
sp l i
spri
ge a
sh a
sp i n
thr
ca m
enc
mea
pres
wire
d ev
h yd
b all
slid
op e
ch u
l ine
cutt
Page
OKS Product
Greases
OKS 1184 20
OKS 4220 20
OKS Silicone Grease 22
Dry Lubricants
OKS 500 24
OKS 510 / 511 24
OKS 530 24
OKS 536 24
OKS 589 24
This Product Application guide does not contain the application areas of all the products in our range. A complete list of all our products is
available from pages 02-31 in this catalogue
The application areas are indicative. It is recommended that the product be tried before use. Please consult your nearest OKS Engineer /
Distributor
®
g
wor metal
i ce g
ics
mec ision
n
ics
ta in
s
ts
s
con rical
n
parotded
ctio
ni n g
correr eing
vi n g
rope
l o ck a d
re
sh i p g/
wa y
s
prec s
king
ing
p i ng
l
suri
j o in
rele ld
ctin
es
ase
raul
stee
ase
l eak
h an
e o st
tact
re l e d
ng
belt
s
n
ho
r
iger
mo u
thre
stru
w el
et-
levse
du
t
i
hin g
stor
e l ec
cl e a
tuni
e
me a
dete
dev
Offs
ba l l
h yd
wire
slid
she
con
f
refr
rm
Maintenance
Products
OKS 91621 26
OKS 9360 23
OKS 9361 24
OKS 451 26
OKS 571 27
OKS 641 27
OKS 621 27
OKS 1103 04
OKS 1360 27
OKS 91361 27
OKS 1521 28
OKS 1601 28
OKS 2100 28
OKS 2101 25
OKS 2140 28
OKS 2251 29
OKS 2211 29
OKS 2511 29
OKS 2521 29
OKS 2531 29
OKS 2600 / 2601 29/30
OKS 2621/2 30
OKS 92621Safe LC Spray 30
OKS 2650 30
OKS 2701 30
OKS 2801 30
OKS 2901 31
OKS 2131 31
®
35
INDEX
®
36
INDEX
®
37
INDEX
®
OKS 92621 Safe LC CFC Free Contact Cleaner Spray for Live Circuits 30, 35
OKS 2650 Biologic Industrial Cleaner (Water Based) 30, 35
38
®
TECHNICAL TERMS
The objectives of this standard is the The Mox-Active (OKS Registered Viscosity refers to the property of
uniform marking of standard Trademark) contained in lubricants liquids to produce a resistance to
lubricants via a system of code enables a smoothing of the flowing due to their inner friction. The
letters and simple graphic symbols. otherwise rough metal surfaces at most important influencing factor for
The marking classifies the lubricant the lubricating points, and therefore the viscosity is the operating
type, the viscosity, the consistency results in a tribologically highly temperature. As the temperature
and the operating temperature. effective surface coating. Run-in increases, the viscosity decreases
However, speciality lubricants can times are considerably shortened, and vice versa. The assignment in
only be described partially by the and friction and wear are greatly viscosity classes is carried out
German standard DIN 51502. reduced. according to DIN 51519. The higher
the number, the more viscous the
DN factor NSF classification liquid.
39
OKS SELECTION GUIDE
Fields of application ®
Roller bearings Valves Measuring devices Dust removal
Properties
max
High Effects of water Environmentally
temperatures friendly
40