Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
www.addpac.com
Multi Port GSM Gateway Series
www.addpac.com 2
Contents
1. WEB Connection
2. Network Setup
3. GSM Setup
4. VoIP Setup
5. Callback Service
6. LCR
7. SMS
8. Advanced Service
9. Monitoring
www.addpac.com 3
WEB Connection
www.addpac.com 4
WEB Connection
www.addpac.com 5
WEB Connection
Cross Cable
LAN 1 Default IP
IP Address : 192.168.10.1
Subnet mask : 255.255.255.0
LAN 1
www.addpac.com 6
WEB Connection
ID : root
Password : router
www.addpac.com 7
Network Setup
①
① WAN Setup (LAN0)
Click
www.addpac.com 8
Network Setup
-PPTP setup
Click
www.addpac.com 9
Network Setup
Click
www.addpac.com 10
GSM Setup
www.addpac.com 11
GSM Setup
※Digit Structure※
** T : Accept all number entered within Inter Digit Time (Default IDT : 3sec)
** Dot(.) : One dot(.) means one digit
** [ ] : The range of number
※Rule tranfer※
- Digit pattern : 025683848 / Digits to insert : 82 / Number of digits to delete : 1 8225683848
- Digit pattern : 00[127]T / Digits to insert : 123 / Number of digits to delete : 2 123[127]T
- Digit pattern : [2-9]4... / Digits to insert : 823848 / Number of digits to delete : 3 823848..
www.addpac.com 12
GSM Setup > Port Information
www.addpac.com 13
GSM Setup > Dial Plan
Dial Plan / Prefix : Setting for making outgoing call to GSM Networks using E1(FXS) or VoIP
① Plan Table : Outgoing call to GSM network can be made with number conversion
② Prefix Table : it is for outgoing call to GSM Networks. Both 1 Stage and 2 Stage are available
1 Stage : Making call after hearing the first dial-tone. Setting Prefix field is required
2 Stage : Making call after the second dial-tone. Setting 2nd Prefix field is required.
In case of 2nd stage using, the Prefix can be used a number for hearing the Second dial-tone
www.addpac.com 14
GSM Setup > Dial Plan
www.addpac.com 15
GSM Setup > E1 Trunk
2. E1 Trunk -1
www.addpac.com 16
GSM Setup > E1 Trunk
2. E1 Trunk -2
Group Setup for E1 Channel.
Be sure to setup before using E1.
E1 PRI Setup
- Protocol-emulate : Be sure to setup in
pair with other device (Network / User)
- Virtual-connect
- Immediate-disc
- Dial-Tone-Generate
- Compand-Type
- Q931 Timer
E1 R2 Setup
Get-Calling-Number : Calling number
enable / disable
www.addpac.com 17
GSM Setup > E1 Extension
2. E1 Extension -1
www.addpac.com 18
GSM Setup > FXS Extension
3. FXS Extension -1
www.addpac.com 19
GSM Setup > GSM Extension
3. GSM Extension -1
www.addpac.com 20
Direct Incoming call
www.addpac.com 21
VoIP Setup
1. Server SIP
2. SIP Registration
3. Server H.323
4. H.323 Registration
5. DTMF/CODEC
6. VoIP Dial Plan
7. Static Route
www.addpac.com 22
VoIP Setup > Protocol Selection
www.addpac.com 23
VoIP Setup > SIP
1. Server SIP -1
①
Click
① SIP Server
-Use SIP Server : Select using SIP Server. Please click “Yes” to use SIP server
-Primary SIP server : Enter IP address of Primary SIP server
-Secondary SIP Server : Enter IP address of Secondary SIP server. The secondary server is activated when Primary
SIP Server is not available
-Local Domain name : Enter local domain when it is required on server authentication
-Default setting is recommended for other field
www.addpac.com 24
VoIP Setup > SIP
2. SIP Registration -1
①
www.addpac.com 25
VoIP Setup > H.323
3. Server H.323 -1
①
Click
① Server H.323
-Use H.323 Server : Select using H.323. Please click “Yes” to use H.323 server
-Primary Gatekeeper server : Enter IP address of Primary Gatekeeper server
-Secondary Gatekeeper Server : Enter IP address of Secondary Gatekeeper server. The secondary server is
activated when Primary Gatekeeper Server is not available
-H.323 ID : Please input Authentication ID to register Gatekeeper
-Default setting is recommended for other field
www.addpac.com 26
VoIP Setup > H.323
3. H.323 Registration -1
www.addpac.com 27
VoIP Setup
5. DTMF/CODEC
①Video Codec
-Select voice codec to be used
Click
www.addpac.com 28
VoIP Setup
① Plan Table
- Digits to Insert : Number you want to enter
- Number of Digit to Delete : Number of digit to delete
- Digit Pattern : Number to apply for conversion
② Prefix Table
- Prefix : Number to make VoIP call
- Plan Index : Make the same number with Plan table
www.addpac.com 29
VoIP Setup
www.addpac.com 30
VoIP Setup
7. Static Route -1
① Static Route : : User can forward call to other party after enter IP address of them.
It can be done without SIP Server or other system
www.addpac.com 31
Callback Service
www.addpac.com 32
Callback Service
IP Network
(WAN)
www.addpac.com 33
Callback Service
Call back
2000 Destination number(2000)
Source number(1000) White list
www.addpac.com 34
Callback Service > WEB Callback
② WEB Callback :
- Destination Number : Enter number to receive call
- Source Number : Enter number of call maker. It must be the same as Dialpattern number
- Apply : Connect call between sender and receiver. Waiting tone is heard until call connected
www.addpac.com 35
Callback Service > WEB Callback
Click
www.addpac.com 36
Callback Service > GSM Callback
② Callback :
- White List Group : Enter group number of port to be used
www.addpac.com 37
Callback Service > GSM Callback
www.addpac.com 38
LCR(Least Cost Routing)
www.addpac.com 39
LCR(Least Cost Routing)
www.addpac.com 40
LCR(Least Cost Routing)
www.addpac.com 41
LCR(Least Cost Routing)
1. Time Interval-1
www.addpac.com 42
LCR(Least Cost Routing)
1. Time Interval-2(Ex)
Description
Description
www.addpac.com 43
LCR(Least Cost Routing)
1. Tariff Group-1
www.addpac.com 44
LCR(Least Cost Routing)
www.addpac.com 45
LCR(Least Cost Routing)
1. LCR Test -1
① LCR Test : The function to make call to virtual number for testing
- Caller : Enter number of sender
- Called Number : Enter number of receiver
- GSM Networks status can be monitored to make virtual call
www.addpac.com 46
LCR(Least Cost Routing)
www.addpac.com 47
SMS
1. SMS -1
※ The number of message can be stored in InBox, Sent Box and Fail Box is 17
www.addpac.com 48
SMS
1. SMS -2
www.addpac.com 49
Advanced Service (GSM)
1. GSM PINs
2. GSM USSD
3. GSM Band
4. BTS
www.addpac.com 50
Advanced Service (GSM)
1. GSM PINs
Click
www.addpac.com 51
Advanced Service (GSM)
2. GSM USSD
www.addpac.com 52
Advanced Service (GSM)
3. GSM Band
www.addpac.com 53
Advanced Service (GSM)
www.addpac.com 54
Advanced Service (GSM)
www.addpac.com 55
Advanced Service (Etc)
www.addpac.com 56
Advanced Service (Etc)
www.addpac.com 57
Advanced Service (Etc)
2. NTP
①
Click
www.addpac.com 58
Advanced Service (Etc)
3. File Browser
①
① File Browser
You may view firmware and configuration file in AP-GS3000.
② Firmware Upload
Use when uploading AP-GS3000 firmware.
Process upload by finding PC related firmware.
Uploaded firmware will be applied after rebooting.
www.addpac.com 59
Advanced Service (Etc)
Click
① Gain & CID : Adjustment output voice level of each port(GSM, FXS)
(You may reduce the level when echo and noise occured)
In addition, call number can be detected by Caller-ID
- Input Gain : Please adjust input gain when sending call is too loud or too low
- Output Gain : Please adjust output gain when receiving call is too loud or too low
- Caller-ID : It is a function to display number of callers
www.addpac.com 60
Advanced Service (Etc)
5. FAX
Click
www.addpac.com 61
Advanced Service (Etc)
6. Service
Click
www.addpac.com 62
Advanced Service
7. Filtering
Click
www.addpac.com 63
Advanced Service (Etc)
8. Security
Click
www.addpac.com 64
Monitoring
1. Call Status
2. System Status
3. GSM Status
4. Call Log / System Log
5. Ping
www.addpac.com 65
Monitoring
1. Call Status
www.addpac.com 66
Monitoring
2. System Status
www.addpac.com 67
Monitoring
3. GSM Status
www.addpac.com 68
Monitoring
www.addpac.com 69
Monitoring
5. Ping
www.addpac.com 70
Thank you
www.addpac.com 71