Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Customized
control panel
Color display with individual graph-
ic and touch screen operation
The system comprises: button and an indicator LED. In the event of short-circuit or
wire break within a circuit, an alarm message is signalled at
Basic module (14 lights)
the affected channel.
Up to 4 extension modules (7 lights each)
Control panel (various designs possible)
The control panel indicates the following information:
The minimum configuration comprises a basic module for Light off (LED off)
14 lights and a standard control panel. Depending on re- Light on (LED on)
quirements, the number of lights can be extended to 42 by Light defective (flashing LED)
adding extension modules of 7 lights each. By applying
more than one basic modules, an arbitrary number of lights In the event of an alarm being triggered, in addition to the
can be controlled and monitored. The modules are encased respective LED an integrated buzzer is activated. (external
in housings, suitable for rail mounting. The lights are con- buzzer optional). The buzzer is deactivated by pressing ‘horn
trolled by means of a control panel with LED status lamps. quit’. The LED continues to flash until the affected channel is
Depending on requirements, control panels can be supplied switched off or repaired. There is an automatic dimmer
either in the standard size (144/192/288x144mm) or to controlled by a photo cell for all LEDs on the control panel.
switching the lights in case of a remote control failure is An additional feature is that the operating hours and the
Power is either drawn from main or emergency supply. In A collective alarm (opener) contact is available for integra-
case of power failure, the emergency supply is switched on tion within an alarm system. The basic module is designed
manually. In either case, the power supply is monitored with two interfaces for the connection of control panels.
permanently. Regardless of power source, the internal volt- The standard control panel or custom variations can be
age is automatically generated and transmitted to the exten- connected via the serial interface. The CAN bus (and/or
Technical Data
24VDC (+30% / -25%)
115VAC / 47...70 Hz
Power supply:
230VAC / 47...70 Hz
Technical Data
AHD-DPS02 E07
24VDC (+30% / -25%)
19 18 17 16 15 14 13 12 11 10 9 8 7 6
Power supply: 115VAC / 47...70 Hz
230VAC / 47...70 Hz
Power consumption: 120…380 m A
Operating temperature: -25°C...70°C
Storage temperature: -30°C...85°C
Weight: 0.54 kg
Degree of protection: IP 20
External dimensions: 145 x 128 x 57 mm
In-/outputs: 1 x serial (Control Panel)
7 light outputs, 2-poles
Assembly: on rail TS 32 and TS 35
Böning Automationstechnologie GmbH & Co. KG • Am Steenöver 4 • D-27777 Ganderkesee • E-Mail:info@boening.com • www.boening.com
VeC-1145 V18 Rev.: Oct 23rd, 2014 • The manufacturer accepts no liability for possible errors contained in descriptions and diagrams.