Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
(COMPONENTS)
IF CONDITIONALLY APPROVED :
(a) SUPPLIER IS REQUESTED TO SUBMIT _________ PIECES SAMPLES AGAIN.
(b) FOR PURCHASING TO BUY _________ PIECES FOR PILOT PRODUCTION.
TESTED BY ENGINEER (S) APPROVED BY ENGINEERING MANAGER
ELECTRICAL
Rm. 1601-04 Westlands Centre, 20 Westlands Road, Quarry Bay, H.K. Tel: 2856 3138 SKYWO HX Fax:2586 3590
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
CUSTOMER:
DATE: 2018-08-6
SUPPLIER USER
1
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
CONTENTS
1. GENERAL DESCRIPTION.................................................................................................................................. 4
1.1. OVERVIEW................................................................................................................................................ 4
1.2. GENERAL FEATURES..............................................................................................................................5
1.3. APPLICATION............................................................................................................................................5
2. ABSOLUTE MAXIMUM RATING..................................................................................................................... 6
3. ELECTRICAL SPECIFICATIONS.......................................................................................................................7
3.1 ELECTRICAL SPECIFICATIONS............................................................................................................. 7
3.1.1. TFT LCD MODULE........................................................................................................................7
3.1.2. LED LIGHTBAR UNIT CHARACTERISTICS............................................................................ 9
3.2. INTERFACE CONNECTION.................................................................................................................. 10
3.2.1. LCD CONNECTOR PIN ASSIGNMENT....................................................................................10
3.2.2. BACK-LIGHT CONNECTOR...................................................................................................... 11
3.3. SIGNAL TIMING SPECIFICATION.......................................................................................................12
3.3.1. LCD INPUT SIGNAL TIMING SPECIFICATIONS...................................................................12
3.4. DATA MAPPING AND TIMING.............................................................................................................14
3.4.1. CONTROL SIGNAL INPUT MODE............................................................................................14
3.4.2. DISPLAY DATA INPUT MODE................................................................................................. 14
3.4.3. CONTROL PACKET DATA........................................................................................................ 14
3.5. PANEL PIXTURE STRUCTURE............................................................................................................ 15
3.6. POWER SEQUENCE............................................................................................................................... 16
3.6.1. LCD DRIVING CIRCUIT.............................................................................................................16
4. OPTICAL CHARACTERISTICS........................................................................................................................17
4.1. TEST CONDITION.................................................................................................................................. 17
4.2. OPTICAL CHARACTERISTICS.............................................................................................................17
5. MECHANICAL CHARACTERISTICS..............................................................................................................21
6. RELIABILITY..................................................................................................................................................... 23
7. INTERNAIONAL STANDARDS....................................................................................................................... 24
7.1. ENVIRONMENT......................................................................................................................................24
8. PACKING............................................................................................................................................................ 25
8.1. PACKING SPECIFICATIONS................................................................................................................. 25
9. PRECAUTION.....................................................................................................................................................25
9.1. ASSEMBLY AND HANDLING PRECAUTIONS..................................................................................25
9.2. SAFETY PRECAUTIONS....................................................................................................................... 25
# APPENDIX........................................................................................................................................................... 26
Version 1.0
2
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
RECORD OF REVISIONS
Version 1.0
3
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
1. GENERAL DESCRIPTION
1.1. OVERVIEW
32E20 is a 32” integrative TFT Liquid Crystal Display module with the LG opencell LC320DXJ-SLA9.
The LC320DXJ is a Color Active Matrix Liquid Crystal Display with an integral the Source PCB and Gate
implanted on Panel (GIP). The matrix employs a- Si Thin Film Transistor as the active element. It is a
transmissive type display operating in the normally black mode. It has a 31.51 inch diagonally measured active
display area with W XGA resolution ( 768 vertical by 1366 horizontal pixel array). Each pixel is divided into
Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the luminance of
the sub-pixel color is determined with a 8-bit gray scale signal for each dot. Therefore, it can present a palette of
more than 16.7M(6bit + FRC) colors.
It is intended to support LCD TV, PCTV where high brightness, super wide viewing angle, high color gamut,
high color depth and fast response time are important.
Version 1.0
4
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
Notes:
(1) Please refer to the attached drawings in chapter 5 for more information about the front and back outline
dimensions.
(2) The spec. of the surface treatment is temporarily for this phase. SKYWORTH reserves the rights to change
this feature.
(3) Test the power consumption of the LCD module (without the power consumption of the power board) under
the condition ILED=800mA.
1.3. APPLICATION
Version 1.0
5
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
The following items are maximum values which, if exceeded, may cause faulty operation or permanent
damage to the LCD module.
Version 1.0
6
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
3. ELECTRICAL SPECIFICATIONS
It requires several power inputs. The VCC is the basic power of LCD Driving power sequence, Which is
used to logic power voltage of Source D-IC and GIP.
Version 1.0
7
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
Version 1.0
8
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
Notes:
(1)The voltage of LED under the conditions at Ta = 25 ±2 ºC IF =800mA.
(2)The lifetime of LED is defined as the time when LED packages continue to operate under the conditions at Ta
= 25 ±2 ºC IF =800mA, and its brightness attenuation to the original 50%.
The peak pulse forward current of LED under the conditions at: Duty 1/10, Pulse width within 10ms.
Version 1.0
9
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
This LCD module employs two kinds of interface connection, one 50-pin FFC connector are used for the
module electronics.
Version 1.0
10
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
Version 1.0
11
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
3.3 SIGNAL TIMING SPECIFICATIONS
Version 1.0
12
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
Version 1.0
13
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
Display data and control signal (RESET) are input to LV0 to LV2.
Version 1.0
14
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
Version 1.0
15
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
3.6 Power Sequence
Version 1.0
16
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
4. OPTICAL CHARACTERISTICS
(2) Definition of LC: the luminance value of the center point across of LCD surface with white signal.
(3) Measure the luminance of gray level 255 at 9 points, see FIG.1. The test probe should be perpendicular to the
surface of the module at each test point.
Min[ L(1), L(2), L(3), L(4), L(5), L(6), L(7), L(8), L(9)]
Uni. = 100%
Max[ L(1), L(2), L(3), L(4), L(5), L(6), L(7), L(8), L(9)]
FIG. 1
Version 1.0
18
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
(6) Definition of Viewing Angle ((x, (y):Viewing angle is the angle at which the contrast ratio is greater than 10.
The angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis
which is normal to the LCD module surface. For more information, see the FIG.2. The above viewing angles
are measured by CA-2000.
Version 1.0
19
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
FIG. 2
Version 1.0
20
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
5. MECHANICAL CHARACTERISTICS
35▲
720,4(outline)
697,68(AA) 49,5
7,5
33▲
421,09(outline)
392,26(AA)
15,77
Version 1.0
21
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
Back side: (include 32E20 Decoration) RDL320HY(LD0-F01);RDL320HY(LD0-F02)
102,5 91
110 93
112
100,09
105
285
螺纹对照表
85
190
132
127
93,5
87,09
69,09
30,09
79,5 100
120 120
285 285
螺纹对照表
Version 1.0
22
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
6. RELIABILITY
Environmental test conditions and derived from SKYWORTH TV set test standard.
Test Item Condition
High temperature operation test 40 ºC,16hrs, RH=75%,on
High temperature storage test 60 ºC,4hrs,RH=75%,recover 1hrs,off
Constant humidity and temperature 40 ºC,96hrs,RH=93%,recover 2hrs,off
Low temperature turn on test 0℃,4hrs, standby,on~off,5times
Low temperature operation test -10ºC,2hrs off then 1hrs on
Low temperature storage test -30 ºC,24hrs off then go up to 25℃ for 1hrs on
Temperature change test -25℃~40℃,60hrs,10 cycle
Vibration test (non-operating) 1~200HZ,10min, half sine wave,1 time each X,Y,Z.
Shock test (non-operating) 100m/s2, pulse length16ms, interval1.5s,1000±10times
Humidity and temperature condition operation 85±3%RH, Ta = 50±2℃,236hrs,on
Version 1.0
23
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
7. INTERNAIONAL STANDARDS
7.1 ENVIRONMENT
ROHS compliance.
Version 1.0
24
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
8. PACKING
9. PRECAUTION
1. Do not apply rough force such as bending or twisting to the module during assembly.
2. To assemble or install module into user's system can be in clean working areas. The dust and oil may cause
electrical short or worsen the polarizer.
3. It's not permitted to have pressure or impulse on the module because the LCD panel and back-light will be
damaged.
4. Always follow the correct power sequence when LCD module is connecting and operating. This can prevent
damage to the CMOS LSI chips during latch-up.
5. Do not pull the I/F connector in or out while the module is operating.
6. Do not disassemble the module.
7. Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily
scratched.
8. It is dangerous that moisture come into or contacted the LCD module, because moisture may damage LCD
module when it is operating.
9. High temperature or humidity may reduce the performance of module. Please store LCD module within the
specified storage conditions.
1. The start-up voltage of back-light is above 33Volts. It may cause an electrical shock while assembling with the
power. Do not disassemble the module or insert anything into the back-light unit.
2. If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth, in case of
contact with hands, skin or clothes, it has to be washed away thoroughly with soap.
3. After the module's end of life, it is not harmful in case of normal operation and storage.
Version 1.0
25
Issue Date:2018.08.06:
Platform No.: 7626-CE200L-T000
# APPENDIX
Version 1.0
26
模组代码清单
Module Code List
平台编号 整机型号 模组屏编号 模组代码 更新时间
Platform No. Product Name Module No. Module Code Update Time
32E20 7626-CE200L-T001 RDL320HY(LD0-F00) 2018/8/6
32E20 7626-CE200L-T002 RDL320HY(LD0-F01) 2018/8/6
7626-CE200L-T000
32E20 7626-CE200L-T003 RDL320HY(LD0-F02) 2018/8/6
进出口料报关信息表(供应商填写)
注:此表在填写的时候可以调整列宽和行高,但不能更改此表的结构,具体填写参数请参照《报关信息要素》。
是
最小包
单
供应商 商品中 装毛重
净重单 层 工 是
创维物料编号 代码 文名称 最小包 单位 电压
规格型 净重 位(PC/ 原产 功/ 还 作 否
(由客户填 (由供 (按规 品牌 生产厂家 装毛重 (盘、 (耐 容量 材质 结构类型 主要参数 用途/功能描述 备注1 备注2
号 (g) 管、桶 国 频率 是 原 加
写) 应商填 范填 (g) 卷、袋 压)
卷等) 多 理 密
写) 写) 、盒
层
等)
?
深圳创维 31.51inches
32"1366 horiz. by
液晶屏 32E20 SKYWORTH RGB电子有 2800 SET 中国 diagonal带LED背 3.20E+21
768 vert. Pixels
限公司 光
填写单位:全球研发中心模组工程研究院 填写人:胡珊珊