Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Oil Pre-Heater
Application:
The SAN oil pre-heater type OB is a horizontally situated flow heater especially
developed for heating of fuel-oils. Type OB is delivered as an insulated vessel with
galvanized cladding and fixture, in- and outlet connectors with DIN-flanges, equipped
with terminal box IP55, built-in limiter and thermostat.
Standard with 3 W/cm². Can be delivered with other surface loading.
Can be delivered for water heating, and in other material.
Oil Pre-Heater
G
I Diviation plate
H Isulation 60 mm
Terminal box
IP 65
E
D
F
E
Cable glands
200 125 C B
A
Table
Type A B C D E F G H I Terminal box
OB 27 1130 270 550 Ø 340 235 505 DN50 PN16 DN 200 125 300 x 300 x 200
OB 45 1505 270 950 Ø 340 235 505 DN50 PN16 DN 200 125 300 x 300 x 200
OB 63 1130 400 550 Ø 460 295 625 DN100 PN16 DN 300 150 400 x 400 x 200
OB 108 1505 400 950 Ø 460 295 625 DN100 PN 16 DN 300 150 400 x 400 x 200
I:\AUTOCAD TEGNINGER\TEGNINGER FOR PROJEKTER\OB'er\Type OB all.idw
This document discloses information and data in which the SAN Electro Heat A/S has proprietary rights. Neither receipt nor possesion
thereof confers or tranfers any right to reproduce, use or disclose in whole or in part except by written permission from SAN Electro Heat A/S.
CHANGE REV.: A,B,C... Internal Review 0A Issued for Review 0B, 0C... Re-issued for Rev. 01 Issued for Construction 02,03... Re-Issued for Construction
ISO 2768
Welded
ISO 13920 Alteration Rev. Date Made by
Drawn by KJ Checked by Approved by TA / SAN Dwg. no.
Date 23-11-2010 Date Date
Item Project
San Oil PRE-Heater
October 2012
kW V www.san-as.com
CHANGE REV.
A
1/1
01263 UK