Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
EP300 EPON Power Meter
Ver:1.0
© Tianjin Deviser Electronics Instrument Co., Ltd.
Deviser Part No.: EP300‐DL
All rights reserved.
Printed in CHINA. April. 2011.
Introduction
EP300 EPON power meter is designed to suit FTTX
services, such as installation, testing and maintenance.
With the pass‐through measurement, EP300 is capable
of measuring all EPON signals simultaneously
(upstream signal with wavelength of 1310nm,
downstream signals with wavelengths of 1490nm and
1550nm). EP300 offers limit line sets analysis, data
storage function, and TOOLBOX software system to
manage the stored data. EP300 also has other
advantages, such as hand‐held design, light to carry and
easy to use for customers who are not necessarily
familiar with fiber optics.
I EP300
for the errors made during compiling and printing
process.
Copyright @ Deviser Corporation all rights reserved. No
part of this publication can be reproduced, stored in a
retrieval system or transmitted in any form, be it
electronically, mechanically, or by any other means
such as photocopying, recording or otherwise, without
the prior written permission of Deviser Corporation.
II EP300
Contents
NOTICE .......................................................................... 1
1. APPEARANCE ............................................................. 3
2. KEYPAD CONFIGURATION .......................................... 5
3. TYPICAL APPLICATION ............................................... 7
4. OPERATING MANUAL ................................................ 8
5. SPECIFICATION......................................................... 19
WARRANTY ................................................................. 21
LIMITATION OF WARRANTY ......................................... 22
SERVICE AND REPAIR ................................................... 24
III EP300
EP300 EPON POWER METER USER GUIDE
NOTICE
1. 3 Ni‐MH rechargeable batteries (1.2V/1.8AH) are
used in EP300. It is recommended to charge the
batteries with no more than 10 hours. Place the
batteries respecting the polarity as indicated.
1 EP300
EP300 EPON POWER METER USER GUIDE
shut‐down function.
5. The equipment may be damaged if the measured
optical input power level is greater than the
maximum measuring range.
2 EP300
EP300 EPON POWER METER USER GUIDE
1. Appearance
Optical Connector
LCD Screen
Threshold Value LED
LED
POWER
Adjustment LED
3 EP300
EP300 EPON POWER METER USER GUIDE
z Liquid Crystal Display (LCD)
Threshold MODE Usb Tag
Power Adapter Tag
Storge Tag Battery Tag
Wavelength
Power Level Status Unit
Unit
Storage Setting Reference MODE
Display
z Connector
z Optical Terminal Connector
4 EP300
EP300 EPON POWER METER USER GUIDE
2. Keypad Configuration
5 EP300
EP300 EPON POWER METER USER GUIDE
Press: To increase number.
6 EP300
EP300 EPON POWER METER USER GUIDE
4. Operating Manual
z Power On and Off
Power On and Off
8 EP300
EP300 EPON POWER METER USER GUIDE
4. Operating Manual
z Power On and Off
Power On and Off
8 EP300
EP300 EPON POWER METER USER GUIDE
z Absolute Measurement MODE
The default power unit is dBm. Press shortly will
switch the unit between dBm and W.
9 EP300
EP300 EPON POWER METER USER GUIDE
z Limit Line Set Selection
12 limit line sets could be selected, each of them
comprises 1310nm, 1490nm and 1550nm wavelengths
and has three specific threshold statuses which are pass,
warning and fail. Limit line sets can be used in Pass/Fail
MODE only. To view the limit line sets and select the
threshold value, please follow the following steps:
Limit line sets selection interface
10 EP300
EP300 EPON POWER METER USER GUIDE
Current threshold value display interface
11 EP300
EP300 EPON POWER METER USER GUIDE
z Pass/Fail MODE
Threshold Value Setting
¾ Warning Power < Measured Optical Power < Pass
Power
LED Color: Green LCD Display: Pass
12 EP300
EP300 EPON POWER METER USER GUIDE
LED Color: Red LCD Display: Fail
LED Color: Orange LCD Display: Warning
13 EP300
EP300 EPON POWER METER USER GUIDE
z Measured Data Storage
②Press to switch between JOB NO., ONT NO.,
and OLT NO., and LOCATION (the option will blink
if it is being selected).
14 EP300
EP300 EPON POWER METER USER GUIDE
15 EP300
EP300 EPON POWER METER USER GUIDE
z Relative Measurement MODE
③ Hold down
EP300 EPON POWER METER USER GUIDE
Warranty
z General information
¾ Deviser Corporation will charge a fee for replacing
optical connectors that were damaged due to
improper use or cleaning.
21 EP300
EP300 EPON POWER METER USER GUIDE
Limitation of Warranty
22 EP300
EP300 EPON POWER METER USER GUIDE
which the product is connected or the operation of any
system of which the product may be a part.
23 EP300
EP300 EPON POWER METER USER GUIDE
Storage
‐20 ~ +70 ℃
Condition
Weight 320 g(Battery is exclusive)
Calibration c
3 Years
Period
a: APC connector
b: Optional SC/PC,FC/APC,SC/APC connector
c: Exclusive: Connector damages
20 EP300
EP300 EPON POWER METER USER GUIDE
Warranty
z General information
¾ Deviser Corporation will charge a fee for replacing
optical connectors that were damaged due to
improper use or cleaning.
21 EP300
EP300 EPON POWER METER USER GUIDE
Limitation of Warranty
22 EP300
EP300 EPON POWER METER USER GUIDE
which the product is connected or the operation of any
system of which the product may be a part.
23 EP300
EP300 EPON POWER METER USER GUIDE
Service and Repair
To send any equipment for service or repair:
invoiced for the cost appearing on this report.
25 EP300
EP300 EPON POWER METER USER GUIDE
Tianjin Deviser Electronics Instrument Co., Ltd.
Add: No.40, Yibin Road, Nankai District, Tianjin (300113), China
Tel: +86‐22‐27645003‐803
Fax: +86‐22‐27645002
E‐Mail: overseasbiz@deviser.com.cn
Website: www.devisertek.com
26 EP300