Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
General Description
Engine Tires and Wheels
Cat C11 at 390 HP (291 kW) 10:00 X 20-16 PR hard rock rib filled with heavy duty
Urethane flat proofing material. Wheels are a steel disc type.
Transmission
Suspension
Allison 4700 OFS 5 speed powershift
Front undercarriage suspension is provided by a coil spring
Differential and crankarm arrangement. Rear undercarriage suspension is
provided by trailing arm walking beams c/w solid link & front
Rockwell planetary drive axles with rear "No spins". Metal axle coil springs. This heavy duty system allows increased
face seals on planet hubs. ground contact of tracks over rough terrain. Oil bath hubs and
spindles with metal face seals.
Steering
Four track design with two tower mounted undercarriages. Full
time power steering utilizing two double-acting steering
cylinders per undercarriage. Heavy duty pressure compensating
Ground Pressure*
piston type steering pump and patented steering equalizer bar. Load Pressure
Tons Tonnes PSI kg/cm²
Brakes 0 0 2.9 0.21
5 4.5 3.3 0.23
Service brake is transmission mounted, drum type, air applied. 10 9.1 3.7 0.26
Parking brakes are driveline mounted drum type with spring 20 18.1 4.4 0.31
applied air release. *6 in (150 mm ) penetration
Specifications: Husky 6
Cab Husky 6 Carrier
All steel, 4 man cab-over type. Fully insulated walls and roof Gradeability Side 40% Max. Forward 50%
with roll down windows and sliding rear window on driver's Approach Angle 40°
side, escape hatch. Full instrumentation: engine water Departure Angle 30°
temperature and engine oil pressure gauge, voltmeter,
transmission oil temperature gauge, fuel gauge and Fuel Capacity 132 U.S. gallons (500 litres)
tachometer/hourmeter. Heavy duty two-speed windshield
wipers. Performance
Turning radius 43 ft (13 m)
Electrical Maximum speed 9 mph
6 ft
(14.5 km/h)
(1.8 m)
Fording depth
12 volt electrical system with 12 volt starting. Heavy duty
wiring for all weather operation. 100 amp, 12 volt alternator. Weights*
Tare 80,000 lbs (36,287 kg)
Frame Payload 40,000 lbs
120,000 lbs
(18,144 kg)
(54,431 kg)
G.V.W.
All welded alloy steel construction. Protective belly pan below * Excluding Options
engine, transmission and steering gear.
Dimensions
Track & Grouser Length - Overall 39 ft 8 in
11 ft 11.5 in
(12.2 m)
(3.64 m)
Width - Overall
Heavy duty 5 ply belting, 56 in (1,420 mm) wide D-dent track. Without tracks 9 ft (2.7 m)
Forged spring steel grouser ½ in (12.7 mm) thick with Height - Overall 11 ft 11.5 in (3.6 m)
matching backing plate. 20 in (508 mm) 5 ply track belting.
Optional flat track available. Deck
Length 20 ft (6.10 m)
Sprockets Width 9 ft
5 ft 11 in
(2.7 m)
(1.8 m)
Deck height
Replaceable drive sprockets of moulded polyurethane with
optional CST ductile iron wear inserts. Tracks
Gauge 7 ft 3 in (2.22 m)
Track width 56 in (1,422 mm)
Husky 6 to Husky 8
Size Comparison
Foremost Industries LP
1225 - 64th Avenue NE
Calgary, Alberta, Canada T2E 8P9 Unless otherwise stated, specifications are for a standard unit and are subject
Tel: 403-295-5800 • Fax: 403-295-5810 • 1-800-661-9190 Canada/U.S.A. to change without notice. Performance specifications are theoretical
maximums and do not include mechanical or other efficiency losses. Actual
E-mail: sales@foremost.ca Website: www.foremost.ca performance may vary.