Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
CERTIFICATE
Certified Passive House Component
Dr. Wolfgang Feist
64283 Darmstadt
Component-ID 0739cw03 valid until 31st December 2019 Germany
ph A
Passive House
phE phD phC phB phA
C E RT I F I E D
efficiency class COMPONENT
www.passivehouse.com Passive House Institute
SCHÜCO International KG
Karolinenstraße 1-15, 33609 Bielefeld, Germany
T +49 521 783 0 | B info@schueco.com | Í http://www.schueco.com |
o
20 C
o
18 C
o
16 C
o
14 C
o
12 C
o
10 C
o
8 C
o
6 C
o
4 C
o
2 C
o
0 C
o
-2 C
o
-4 C
o
-6 C
o
-8 C
o
-10 C
Description
Aluminum curtain wall, insulated by PE-foam (0,038 W/(mK)) and PET-foam (0,035 W/(mK)). Reduc-
tion of the radiation losses by low emmissivity tape. Pane thickness: 46 mm (6/16/4/16/4), rebate
depth: 13 mm, spacer: SWISSPACER Ultimate.
Explanation
The element U-values were calculated for the test element size of 1.20 m × 2.50 m with Ug = 0.70 W/(m2 K).
If a higher quality glazing is used, the element U-values will improve as follows:
Transparent building components are sorted into efficiency classes depending on the heat losses
through the opaque part. The frame U-Values, frame widths, thermal bridges at the glazing edge and
the glazing edge lengths are included in these heat losses. A more detailed report of the calculations
performed in the context of certification is available from the manufacturer.
The Passive House Institute has defined international component criteria for seven climate zones. In
principle, components that have been certified for climate zones with higher thermal requirements
may also be used in climates with less stringent requirements. In a particular climate zone it may
make sense to use a component of a higher thermal quality which has been certified for a climate
zone with more stringent requirements.
www.passivehouse.com
Frame width U -value frame Ψ -panel edge Temp. Factor
Frame bf Uf 1
Ψg fRsi=0.25
values 2
mm W/(m K) W/(m K) [-]
Validated installations
Exterior insulation and finishing Lighthweight timber (fixed Ventilated facade (fixed
system (EIFS) (fixed glazed) glazed) glazing)
1
Includes ∆U = 0.17 W/(m2 K). Determined through 3D - FEM Simulation
2
Determined through 3D - FEM Simulation . Glass carrier type : Non-Metallic Glass Carrier with Screws
www.passivehouse.com
www.passivehouse.com