Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA-SHIELDED METAL ARC WELDING NC II
UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
CERTIFICATION OF LEARNER’s MASTERY
∕
1.2 Deposit weld beads on plate
ALA, ERIC SANTOS/12- SMAW/130821070001 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions
Annex 4
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II
The learner’s least mastered competencies shall be the focus of the education and 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
training under the Joint Delivery Voucher Program – Technical Vocational positions
Livelihood(JDVP-TVL) SY 2019-2020. UC2: WELD CARBON STEEL PLATES AND
This certification is being issued for the tracking of his/her competencies PIPES USING SMAW
2.1 Weld plates in single pass groove
Certified by: Noted: joints in overhead positions
∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.2 Weld plates in multiple pass groove
TVL Teacher Principal joints in overhead positions ∕
(Signature over printed name) (Signature over printed name)
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
positions
Date: Date:
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
∕
CERTIFICATION OF LEARNER’s MASTERY
1.2 Deposit weld beads on plate
ALOG, RZEL JOHN TARADEL/12-SMAW/130789070001 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II UC1: WELD CARBON STEEL PLATES USING
SMAW
ID Number: _______________________________________________________
1.1 Explain the essentials of welding
∕
CERTIFICATION OF LEARNER’s MASTERY
1.2 Deposit weld beads on plate
∕
BAROTO, DARWIN KANDIAN/12- SMAW/130846070004
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA 2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
positions
TVL Teacher Principal
(Signature over printed name) (Signature over printed name) Signature of Voucher Holder:____________________________
Date: Date:
JOINT VOUCHER PROGRAM FOR SENIOR HIGH SCHOOL
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
∕
CERTIFICATION OF LEARNER’s MASTERY
1.2 Deposit weld beads on plate
BARZO, DARWIN LABANERO/12- SMAW/130793070003 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA-SHIELDED METAL ARC WELDING NC II UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
∕
CERTIFICATION OF LEARNER’s MASTERY
1.2 Deposit weld beads on plate
CAJEBEN, EDUARDO CALAMBRO JR./12- SMAW/129855670025 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA-SHIELDED METAL ARC WELDING NC II UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
∕
CERTIFICATION OF LEARNER’s MASTERY
1.2 Deposit weld beads on plate
DASAN, CHRISTIAN BAYOK/12 -SMAW/130846060010 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
∕
CERTIFICATION OF LEARNER’s MASTERY
1.2 Deposit weld beads on plate
EMBAJADORA LARRY AZCUNA JR./12- SMAW/130631070010 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
∕
CERTIFICATION OF LEARNER’s MASTERY
1.2 Deposit weld beads on plate
FEDERIZO, JOHN PAUL DASAN/12- SMAW/130794050016 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
∕
CERTIFICATION OF LEARNER’s MASTERY
1.2 Deposit weld beads on plate
GALICIA, JOSHUA S/12- SMAW/130789050043 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
∕
CERTIFICATION OF LEARNER’s MASTERY
1.2 Deposit weld beads on plate
GANOY, JOSHUA AGAO/12- SMAW/130821070025 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
∕
CERTIFICATION OF LEARNER’s MASTERY
1.2 Deposit weld beads on plate
HUQUERIZA, JOEMARY PALOMO/ 12- SMAW/304552180001 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/ 304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA-SHIELDED METAL ARC WELDING NC II
UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
CERTIFICATION OF LEARNER’s MASTERY ∕
KAMI, JACOB DATANG/ 12- SMAW/ 130821070032 1.2 Deposit weld beads on plate
∕
(Name of student/Grade and Section/LRN) 1.3 Weld plates in single pass fillet joints
in all positions ∕
Of
LAMIAN NATIONAL HIGH SCHOOL/304552 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA 2.2 Weld plates in multiple pass groove
joints in overhead positions ∕
TVL Teacher Principal
(Signature over printed name) (Signature over printed name) 2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
positions
Annex 4
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II
LEAST
ID Number: _______________________________________________________ LEARNING COMPETENCIES MASTERED
MASTERED
UC1: WELD CARBON STEEL PLATES USING
CERTIFICATION OF LEARNER’s MASTERY
SMAW
KAMI,JERALDO DATANG/12-SMAW/ 1.1 Explain the essentials of welding
∕
(Name of student/Grade and Section/LRN) 1.2 Deposit weld beads on plate
∕
Of 1.3 Weld plates in single pass fillet joints
in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/ 304552
1.4 Weld plates in multiple pass fillet
joints in all positions ∕
(Name of School/School ID) 1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
SHIELDED METAL ARC WELDING NC II ∕
positions
(TVL Specialization)
1.6 Weld plates in multiple pass groove
The learner’s least mastered competencies shall be the focus of the education and joints in flat, horizontal and vertical ∕
positions
training under the Joint Delivery Voucher Program – Technical Vocational
UC2: WELD CARBON STEEL PLATES AND
Livelihood(JDVP-TVL) SY 2019-2020.
PIPES USING SMAW
This certification is being issued for the tracking of his/her competencies 2.1 Weld plates in single pass groove
joints in overhead positions
∕
Certified by: Noted:
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA 2.2 Weld plates in multiple pass groove
joints in overhead positions ∕
TVL Teacher Principal
(Signature over printed name) (Signature over printed name) 2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
positions
Annex 4
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
________
UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
CERTIFICATION OF LEARNER’s MASTERY
∕
1.2 Deposit weld beads on plate
KUYAN, JAMES JENNETH BORRES/ 12- SMAW/ 316923140008 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/ 304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕ Signature of
(Signature over printed name) (Signature over printed name) positions
Voucher
TVL Teacher Principal Holder:____________________________
Date: Date:
JOINT VOUCHER PROGRAM FOR SENIOR HIGH SCHOOL
Annex 4
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
ID Number: _______________________________________________________
UC1: WELD CARBON STEEL PLATES USING
CERTIFICATION OF LEARNER’s MASTERY SMAW
1.1 Explain the essentials of welding
∕
LLASOS, CHRISTIAN PORSALIDA/ 12- SMAW/ 130789070059
1.2 Deposit weld beads on plate
∕
(Name of student/Grade and Section/LRN)
1.3 Weld plates in single pass fillet joints
Of in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
Annex 4
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
ID Number: _______________________________________________________
UC1: WELD CARBON STEEL PLATES USING
CERTIFICATION OF LEARNER’s MASTERY SMAW
1.1 Explain the essentials of welding
∕
SERVAÑEZ, IAN EULATRIZ/ 12- SMAW/ 130789070086
1.2 Deposit weld beads on plate
∕
(Name of student/Grade and Section/LRN)
1.3 Weld plates in single pass fillet joints
Of in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
Annex 4
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
ID Number: _______________________________________________________
UC1: WELD CARBON STEEL PLATES USING
CERTIFICATION OF LEARNER’s MASTERY SMAW
1.1 Explain the essentials of welding
∕
TARADEL, STEVEN REY FALCO/ 12- SMAW/ 130631070030
1.2 Deposit weld beads on plate
∕
(Name of student/Grade and Section/LRN)
1.3 Weld plates in single pass fillet joints
Of in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
Annex 4
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
ID Number: _______________________________________________________
UC1: WELD CARBON STEEL PLATES USING
CERTIFICATION OF LEARNER’s MASTERY SMAW
1.1 Explain the essentials of welding
∕
ABALOIS, NICO ABABA/ 12- SMAW/ 316922130001
1.2 Deposit weld beads on plate
∕
(Name of student/Grade and Section/LRN)
1.3 Weld plates in single pass fillet joints
Of in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
∕
CERTIFICATION OF LEARNER’s MASTERY
1.2 Deposit weld beads on plate
BUYCO, MARK SISTUAL/12- SMAW/ 130789070015 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
∕
CERTIFICATION OF LEARNER’s MASTERY
1.2 Deposit weld beads on plate
CAHILIG, KRIS JOHN DIME/12- SMAW/130789070016 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
∕
CERTIFICATION OF LEARNER’s MASTERY
1.2 Deposit weld beads on plate
CALVO, ERWIN RELATADO JR./ 12- SMAW/ 304552110065 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
∕
CERTIFICATION OF LEARNER’s MASTERY
1.2 Deposit weld beads on plate
CHAVEZ, JORDAN PORRAS/ 12- SMAW/ 130789070022 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
∕
CERTIFICATION OF LEARNER’s MASTERY
1.2 Deposit weld beads on plate
DALISAY, JEROME MAY MATI-ONG/12- SMAW/ 130789070024 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
∕
CERTIFICATION OF LEARNER’s MASTERY
1.2 Deposit weld beads on plate
DE JOSEPH, JEKIE GARCIA/12- SMAW / 130794070008 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
∕
CERTIFICATION OF LEARNER’s MASTERY
1.2 Deposit weld beads on plate
DUMALOGDOG, JAKE DUMALAOG/ 12- SMAW/ 130789070037 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
∕
CERTIFICATION OF LEARNER’s MASTERY
1.2 Deposit weld beads on plate
HORTIL, GERVIN AMBINO/ 12- SMAW/ 130789070052 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
∕
CERTIFICATION OF LEARNER’s MASTERY
1.2 Deposit weld beads on plate
LABUYO, ALEXIS ART KIBANG/ 12- SMAW/ 130821670036 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
∕
CERTIFICATION OF LEARNER’s MASTERY
1.2 Deposit weld beads on plate
QUIDATO, ROBERT JOHN SUPRANES/ 12- SMAW/ 130641070077 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
∕
CERTIFICATION OF LEARNER’s MASTERY
1.2 Deposit weld beads on plate
SAMSON, JOSHUA LACHICA/ 12- SMAW/ 130789070083 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
∕
CERTIFICATION OF LEARNER’s MASTERY
1.2 Deposit weld beads on plate
SAMSON, REYMARK DAMANDAMAN/ 12- SMAW/ 130631070024 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
∕
CERTIFICATION OF LEARNER’s MASTERY
1.2 Deposit weld beads on plate
SUPERAL, CLENTH JOEY AGUJETAS/ 12- SMAW/ 130794120007 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions
Annex 4 LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
∕
CERTIFICATION OF LEARNER’s MASTERY
1.2 Deposit weld beads on plate
TUAN , JOHN DAVE PARCON/ 12- SMAW/ 130789070071 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions
Annex 4
LEAST
LEARNING COMPETENCIES MASTERED
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II MASTERED
UC1: WELD CARBON STEEL PLATES USING
ID Number: _______________________________________________________ SMAW
1.1 Explain the essentials of welding
CERTIFICATION OF LEARNER’s MASTERY ∕
DERIAL, DAREL DAVE YORO/ 12- SMAW/ 130789050030 1.2 Deposit weld beads on plate
∕
(Name of student/Grade and Section/LRN) 1.3 Weld plates in single pass fillet joints
in all positions ∕
Of
1.4 Weld plates in multiple pass fillet
LAMIAN NATIONAL HIGH SCHOOL/304552 joints in all positions ∕
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and
PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational
2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
Annex 4
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
ID Number: _______________________________________________________
UC1: WELD CARBON STEEL PLATES USING
CERTIFICATION OF LEARNER’s MASTERY SMAW
1.1 Explain the essentials of welding
∕
1.2 Deposit weld beads on plate
ESPAÑOL, AZI KIUNISALA/ 12- SMAW/ 130789060048 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions
Annex 4
Public Senior High School – TVL: IA- SHIELDED METAL ARC WELDING NC II LEAST
LEARNING COMPETENCIES MASTERED
MASTERED
ID Number: _______________________________________________________
UC1: WELD CARBON STEEL PLATES USING
CERTIFICATION OF LEARNER’s MASTERY SMAW
1.1 Explain the essentials of welding
∕
1.2 Deposit weld beads on plate
PIOLO, THEA MAE DOHAYLO/ 12- SMAW/ 130789070077 ∕
1.3 Weld plates in single pass fillet joints
(Name of student/Grade and Section/LRN) in all positions ∕
Of 1.4 Weld plates in multiple pass fillet
joints in all positions ∕
LAMIAN NATIONAL HIGH SCHOOL/304552
1.5 Weld plates in single pass groove
joints in flat, horizontal and vertical
positions ∕
(Name of School/School ID)
SHIELDED METAL ARC WELDING NC II 1.6 Weld plates in multiple pass groove
joints in flat, horizontal and vertical ∕
(TVL Specialization) positions
UC2: WELD CARBON STEEL PLATES AND
The learner’s least mastered competencies shall be the focus of the education and PIPES USING SMAW
training under the Joint Delivery Voucher Program – Technical Vocational 2.1 Weld plates in single pass groove
Livelihood(JDVP-TVL) SY 2019-2020. joints in overhead positions
∕
This certification is being issued for the tracking of his/her competencies
2.2 Weld plates in multiple pass groove
Certified by: Noted: joints in overhead positions ∕
CHERRIE ROSE M. DE ALA LEOLYN A. SIMORA
2.3 Weld pipe in 1G, 2G, 5G and 6G
∕
TVL Teacher Principal positions