Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
1.1.3.
Badotherm model BDT6 series is only available as 100 mm dia and is fillable.
These gauges are suitable for gaseous and liquid, non-aggressive media that
will not obstruct the pressure system or attack copper alloy parts and has a
ABS casing.
mounting variations
type A bottom connection, direct mounting
type B panel mounting, clamp fixing, back connection
BDT6 type C surface mounting, bottom connection
type D back connection, direct mounting
type E panel mounting, back connection
type F panel mounting, bottom connection
56 For technical data sheets and dimensional drawings please refer to our website www.badotherm.com
01/01/2006 rev 2
BDT6 - technical data sheet
pressure details
working pressure
Steady 3
/4 x full scale value
Fluctuating 2
/3 x full scale value
Short time see over-pressure table
temperature details
temperature limitations
ambient process The variation of indication caused by the effects of tem-
perature shall not exceed :
glycerine filling -25 ºC to 60 ºC 60 ºC
±0,04 x (ambient temperature-reference temperature)%
brass internal, no filling -40 ºC to 60 ºC 65 ºC
of the span
st.st. internal, no filling -40 ºC to 60 ºC 200 ºC
design information
ingress protection design
IP 65 per EN 60 529 / IEC 529 EN 837-1
IP 54 per EN 60 529 / IEC 529 (BDT5, BDT5-18 only)
drawings
type A type A
dimensions
ns d d1 L H h weight
100 114 100 50 145 - 0,60 kg
Note : dimensions are in mm