Documenti di Didattica
Documenti di Professioni
Documenti di Cultura
LIVE STREAMING
QUICK REFERENCE GUIDE
UDP/TCP STREAMING (PUSH)
These simple instructions show how to stream to a Video Lan Player (VLC) on your laptop
from the GY-HM850 and GY-HM890 camcorders. Please note that you will need to have
some basic knowledge of IP technology and how to configure a firewall on your network.
Streaming in this example will be via a cable-to-cable connection; you can use any other
WiFi or 3G/4G connection by following this network setup principle too. With a WAN
connection, the destination address is always your official IP address and not the local
address, so the router needs to be set up for port forwarding as follows:
UDP://@:6500
The stream will be visible after a few seconds. Please note that the VLC Player needs
around five seconds to reach final quality, depending on your PC. If you cannot see a
stream, check your firewall.
RTP/RTSP STREAMING (PULL)
• Protocol: RTSP
• User name: prohd
• Password: 1111
• IP address (of the camcorder,
e.g., 192.168.0.1)
• Port (fixed): 554
• Stream name (also fixed): Stream
Start streaming on the camcorder and press play on the VLC Player software;
it will take a few seconds for the image to appear.
USING ZIXI FORWARD ERROR CORRECTION PROTOCOL
To use the Zixi service, you must first register for the services at www.zixi.com. Some
basic functions are free, such as the built-in Zixi licence in our camcorder. Zixi offers
a wide range of services over the cloud for any dedicated application, from storage to
transmuxing. In each case, you need the Zixi cloud platform first. Zixi can be used in a
simple way with VLC and a Zixi plug-in - for information on this, please ask Zixi directly.
It is also possible to use an Android or Apple iOS player application.
Please note that if you use a Teradek decoder, you can use Zixi cable to cable, but you
will need to purchase the Zixi licence for the Teradek decoder at www.zixi.com.
The following example uses the VLC plug-in - install this plug-in from the file, and once it
starts to run, the plug-in will be installed.
To use Zixi with VLC Player, use the Zixi plug-in that you installed. To pick up the stream
from the Zixi cloud service, start the VLC Player with the Zixi plug-in by entering a special
but simple command.
Step 1: Create a new TEXT file somewhere on your PC (in a location of your choice).
Any text program (e.g., Notepad) can be used.
Step 2: Open this new text file and enter one single command line, without any returns.
This command line is based on our example sample names:
zixi://mychannel.zixi.com/mystream
Please make sure that your Windows system sets the extension to .VLC,
and not to .VLC.TXT – if this is the case, you need to change your folder settings to make
known extensions visible.
When everything is correct, you can simply check in your Windows Explorer as the VLC
icon will be now be in front of the file name, as shown below:
Start the stream on your camcorder and double-click the file – VLC will open and the
streaming will start after a few seconds. It is not necessary to open the VLC first.
I trust that these guidelines will help you to quickly set up your streaming connection and
that you can also use them to configure other streaming addresses and situations.
Sincerely yours,
Gustav W. Emrich
Product Manager JVC Professional Europe Ltd.